American Standard Ceramix 2021.831 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

0





1





2




3




4





5





6




Installation
TM Instructions
2021.831
KITCHEN FAUCETS
HI-FLOW SPOUT
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
Certified to comply with ASME A112.18.1M
please read these instructions carefully before you begin.
M66241 REV.1.1
TOOLS REQUIRED
Channel Locks
Adjustable Wrench
Plumbers' Putty or Caulking Phillips Scr

ملخص المحتوى في الصفحة رقم 2

0 1 2 3 4 5 6 SPOUT BASE INSTALLATION 1 3 2 SINK OR 5/16'' MIN. MOUNTING Remove ESCUTCHEON (1) with RUBBER 3 SURFACE RING (2) and insert SPOUT BASE (3) through hole from underside of Sink. Threads of SPOUT BASE (3) should extend at least 5/16-inch above mounting surface. If necessary, RUBBER WASHER adjust LOCKNUT (4). 4 Place RUBBER RING (2) into ESCUTCHEON (1) recess and thread ESCUTCHEON (1) onto SPOUT BASE (3) until snug a

ملخص المحتوى في الصفحة رقم 3

0 1 2 3 4 5 6 TEST INSTALLED FITTING 6 3 With HANDLE (1) in OFF position, turn on 1 WATER SUPPLIES (2) and check all connections for leaks. Remove AERATOR (3). 4 Operate HANDLE (1) up and down, in COLD and HOT positions, to flush water lines thoroughly. Direct SPRAY HEAD (4) into sink. Open faucet and 5 activate spray. Check SPRAY HOSE (5) connections for leaks. Replace AERATOR (3). 2 ADJUST HOT LIMIT STOP 7 8 By restricting h