Cooper Lighting Portfolio H17500QT4 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PORTFOLIO
Installation Instructions for H17500QT4 and H17250QT4 Commercial Surface
Cylinders and for H77500QT4 and H77250QT4 Wall Mount Cylinders
Figure 1 Figure 2
Pendant Kit, H836
(Sold Separately)
Housing
Heat Sink and
Lamp Assembly
Mounting Screws
Upper Reflector
Assembly
Lower Reflector
Assembly
CAUTION: To avoid possible electrical shock, be sure that power supply is
Figure 3
Heat Sink
turned off before installing or servicing this fixture.
STEP 1:
STEM/CANOPY MOUNT (Figure 1)
Lamp
• Secu

ملخص المحتوى في الصفحة رقم 2

PORTFOLIO TO INSTALL LOWER REFLECTOR ASSEMBLY Figure 4 STEP 3: Attach safety tether from lower reflector assembly to mounting bracket inside the can via clip. Reflector Assembly is held in place with torsion springs that pass through slots inside the can. (Figure 5) WALL MOUNT ONLY STEP 4: Install wall housing/wall bracket shown in Figure 6 over the outlet box on the wall. STEP 5: Using the (2) screws shown in Figure 5, secure the assembly to the outlet box. STEP 6: Make wiring connections. STEP