Aiphone JK-DVF-XP دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

JK-DVF-XP
Video Door Station with Standalone Prox Reader
- INSTRUCTIONS -
The JK-DVF-XP is a color audio-video door station for Aiphone’s JK-series, containing a standalone proximity card
reader with embedded host controller. Capable of storing up to 5,000 sets of credentials (cards) and operating
completely independent of an external host controller or PC, the JK-DVF-XP is ideal for all installations where reliable,
inexpensive and easy-to-manage access control is desired.
Note: Programmi

ملخص المحتوى في الصفحة رقم 2

MOUNTING & INSTALLATION Installation Location: Care should be taken when choosing the best location for mounting the JK-DVF-XP. Do not install the video door station in any areas subject to direct sunlight or other strong direct lighting conditions; installation in such locations may cause reduced visibility and/or video quality while viewing from the master station. Mounting Height & Viewing Angle: Wide and Zoom Picture Wide Up/Down Wide Left/Right 6'7" 170° angle of view JK-DVF-XP

ملخص المحتوى في الصفحة رقم 3

WIRING (See Note 4) Forced Entry Sensor Input (See Note 2) Request-Exit (Egress) Input (See Note 4) Forced Entry Trigger Out Grey (See Note 3) Night Lock Green Trigger Out Grey / Pink Red / Blue (See Note 1) Violet (Lock) Brown (Ground) White: Not Used Yellow: Not Used Red Pink: Not Used + DC Power Blue: Not Used Strike Black - 12V DC Power Supply NOTES: 1. The ‘Lock’ output (Violet wire) is a normally-open solid-state contact rated at 30VDC / 1A. Only DC-powered locks can be connected direct

ملخص المحتوى في الصفحة رقم 4

SPECIFICATIONS DIMENSIONS: JK-DVF-XP PROGRAMMING: See programming instructions included with the required XP-KIT Programming Starter Kit (sold separately). Note: Do not attempt to program or use the JK-DVF-XP door station without first reading the initialization instructions included with the XP-KIT Programming Starter Kit! SPECIFICATIONS: CARD READER: DOOR STATION: Power Source: 12V DC Power Source: JK-1MED / JK-1MD master Current Requirements: 40mA (Avg) Camera unit: CMOS Camera Terminations