ملخص المحتوى في الصفحة رقم 1
Phone Guide
Cisco IP Phone 7902G
for Cisco CallManager
License and Warranty
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Text Part Number: 78-16335-01
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Contents Getting Started 1 How to Use this Guide 1 Where to Find Additional Information 2 Safety and Performance Information 2 Connecting Your Phone 4 An Overview of Your Phone 6 Buttons and Hardware 6 Understanding Feature Availability 8 Going On-Hook and Off-Hook 8 Basic Call Handling 9 Placing a Call 9 Answering a Call 9 Ending a Call 9 Using Hold and Resume 10 Transferring a Connected Call 10 Making Conference Calls 11 Forwarding Your Calls to Another Number 12 Using Voice Messaging 13 Prior
ملخص المحتوى في الصفحة رقم 4
Accessing Your User Options Web Pages 17 Logging In to the User Options Web Pages 17 Troubleshooting Your Phone 18 Cisco One-Year Limited Hardware Warranty Terms 19 iv 78-16335-01
ملخص المحتوى في الصفحة رقم 5
Getting Started These sections give you the basic information you need to start using your new Cisco IP Phone. How to Use this Guide This guide provides you with an overview of the features available on your phone. You can read it completely for a solid understanding of your phone’s capabilities, or refer to the table below for pointers to commonly-used sections. If you want to... Then... Review important safety See the “Safety and Performance Information” section on information page 2. Use y
ملخص المحتوى في الصفحة رقم 6
Where to Find Additional Information You can access the most current Cisco documentation on the World Wide Web at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.com International Cisco websites can be accessed from this URL: http://www.cisco.com/public/countries_languages.shtml Safety and Performance Information Installing and Using Your Phone Read the following safety notices before installing or using your Cisco IP Phone: Wa
ملخص المحتوى في الصفحة رقم 7
Getting Started Warning To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to telephone network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports use RJ-45 connectors. Use caution when connecting cables. Using an External Power Supply The following warnings apply when you use the external power supply with the Cisco IP Phone: Warning This product relies on the building's installation for short-circ
ملخص المحتوى في الصفحة رقم 8
Connecting Your Phone Your system administrator will likely connect your new Cisco IP Phone to the corporate IP telephony network. If that is not the case, refer to the graphic and table below to connect your phone. 3 2 5 1 4 1 Network (Ethernet) port (10 BASE T) 2 Handset port 3 DC adaptor port (DC48V) 4 Power supply with DC output connector (Optional. Required only if power is not supplied through an Ethernet connection.) 5 Power cable with wall AC plug. Provided if your phone uses extern
ملخص المحتوى في الصفحة رقم 9
Connecting Your Phone Adjusting the Handset Rest When you connect your phone, you might want to adjust the handset rest to ensure that the receiver will not slip out of the cradle. See the table below for instructions. 1 2 3 1 Set the handset aside and pull the square plastic tab from the handset rest. Rotate the tab 180 degrees. 2 3 Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest. Registering with TAPS Af
ملخص المحتوى في الصفحة رقم 10
An Overview of Your Phone The Cisco IP Phone model 7902G is a basic telephone that provides the following features: • Voice communication over a data network One phone line that can support up to two calls Familiar telephony features to handle calls easily Online control from your User Options web pages Buttons and Hardware Cisco IP Phone Indicates the Cisco IP Phone model number 1 series type 2 Label and plastic Use the paper label, protected by a plastic cover, to indicate your phone co
ملخص المحتوى في الصفحة رقم 11
An Overview of Your Phone 3 Feature buttons Redial Dials the most recently dialed number. Transfer Transfers a call to another party. Conference Sets up a single call for 3 to 16 participants. Messages Accesses voice messages left by callers. Volume button Increases or decreases volume for the handset. Also controls the ring volume 4 (if on-hook). 5 Hold button Places an active call on hold, for example, to place a new call; resumes a call on hold; and switches between an incoming call or an a
ملخص المحتوى في الصفحة رقم 12
Understanding Feature Availability The operation of your Cisco IP Phone and the features available to you may vary, depending on the call processing agent used by your company and also on how your company’s phone support team has configured your phone system. Therefore, some of the features included in this Phone Guide might not be available to you or might work differently on your phone system. Contact your support desk or system administrator if you have questions about feature operation o
ملخص المحتوى في الصفحة رقم 13
Basic Call Handling Basic Call Handling This section covers basic call-handling tasks such as placing, answering, transferring, and conferencing calls. The features you use to perform these tasks are standard and available on most phone systems. Placing a Call If you want to... Then... Place a call Lift the handset and dial the number. Redial the most recently dialed number Lift the handset and press (Redial). Speed dial a number Press and hold (for about 2 seconds) the number on your keypad
ملخص المحتوى في الصفحة رقم 14
Using Hold and Resume Only one call can be active at any given time; all other calls must be placed on hold. If you want to... Then... Put a call on hold Press (Hold). The Hold button lights red. A call on hold remains active even though you and the other party cannot hear each other. You can answer or place another call while a call is on hold. Return to the held call Press (lit Hold). Tip Engaging the Hold feature typically generates music or a beeping tone. For this reason, avoid putting
ملخص المحتوى في الصفحة رقم 15
Basic Call Handling Making Conference Calls Use the Conference button to set up a standard conference. A standard conference allows from 3 to 16 people to participate in a single call. See the table below for details. Note Your phone line must be configured for two calls for you to use Hold with Conference as described here. Your system administrator can confirm whether your phone is configured to support one or two calls. If you want to... Then... Invite current callers to join a During a c
ملخص المحتوى في الصفحة رقم 16
Forwarding Your Calls to Another Number You can use Call Forward All to redirect your incoming calls from your Cisco IP Phone to another number. Note Enter the Call Forward All target number exactly as you would need to dial it from your desk phone. For example, enter an access code such as 9 or the area code, if necessary. If you want to... Then... Set up call forwarding from Lift the handset and press **1. You will hear a short confirmation your phone tone. Enter the phone number to which
ملخص المحتوى في الصفحة رقم 17
Basic Call Handling Using Voice Messaging Use the Messages button to access your voice messages as outlined in the table below. Note Your company determines the voice message service that your phone system uses. For the most accurate and detailed information about using the voice message service, see the documentation that came with it. If you want to... Then... Set up your voice Press (Messages) and follow the voice instructions. message service Your system administrator will provide you wi
ملخص المحتوى في الصفحة رقم 18
Prioritizing Critical Calls Advanced call-handling tasks involve special (non-standard) features that your system administrator might configure for your phone depending on your call-handling needs and work environment. You typically will not have access to these features by default. In some specialized environments, such as military or government offices, you might need to receive urgent or critical calls. These critical calls might require higher priority handling, such as being able to byp
ملخص المحتوى في الصفحة رقم 19
Customizing Phone Settings Customizing Phone Settings You can personalize your Cisco IP Phone 7902G by adjusting the settings, as described in the tables below. Adjusting the Volume The table below describes how to adjust and save volume levels on your phone. If you want to... Then... Adjust the volume Press Volume when the handset is in use. level for a call The volume is saved automatically when you release the Volume button. Adjust the volume Press Volume while the handset is in the cradle.
ملخص المحتوى في الصفحة رقم 20
Setting Up Speed Dial Buttons Speed dial numbers allow you to quickly dial phone numbers without requiring you to enter the phone number each time. You can create up to four speed dial numbers on your phone using the User Options web pages. (See the “Logging In to the User Options Web Pages” section on page 17 for more information about your User Options pages.) Note Your system administrator can assign speed dial buttons to your phone; they can also restrict the number of speed dial number
