ملخص المحتوى في الصفحة رقم 1
Order No. CPD0611208C1
Notebook Computer
CF-Y5
This is the Service Manual for
the following areas.
M …for U.S.A. and Canada
Model No. CF-Y5LWVYZ 1 2
1: Operation System
B: Microsoft® Windows® XP Professional
2: Area
M: Refer to above area table
© 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
ملخص المحتوى في الصفحة رقم 2
WARNING For U.K. This apparatus must be earthed for your safety. To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connec- tion to earth. Wrongly wired extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power poi
ملخص المحتوى في الصفحة رقم 3
LASER SAFETY INFORMATION For U.S.A. Class 1 LASER-Product This product is certified to comply with DHHS Rules 21 CFR Subchapter J. This product complies with European Standard EN60825 (or IEC Publication 825) For all areas This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation. Caution: (1) Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. (2) The drive is desi
ملخص المحتوى في الصفحة رقم 4
4
ملخص المحتوى في الصفحة رقم 5
5
ملخص المحتوى في الصفحة رقم 6
CONTENTS 1. Specifications 7 2. Names and Functions of Parts 10 3. Block Diagram 12 4. Diagnosis Procedure 13 5. Power-On Self Test (Boot Check) 15 6. List of Error Codes 16 7. Self Diagnosis Test 18 8. Wiring Connection Diagram 23 9. Disassembly/Reassembly 24 10. Exploded View 80 11. Replacement Parts List 83
ملخص المحتوى في الصفحة رقم 7
1 Specifications Main Specifications Model No. CF-Y5LWVYZBM ® *1 CPU/ Intel Core™ Duo Processor Low Voltage L 2400 (1.66 GHz, 2 MB L2 cache, 667 Secondary cache memory MHz FSB) ® Chip Set Mobile Intel 945 GMS Express chip set *1 *1 Main Memory 512 MB , DDR2 SDRAM (1536 MB Max.) *1 *2 Video Memory UMA (128 MB Max.) *3 Hard Disk Drive 60 GB CD/DVD Drive USB 2.0 connection interface DVD MULTI Drive built-in, Buffer underrun error prevention function: Supported *6 *7 *3 *3 *8 Continuous Data Tr
ملخص المحتوى في الصفحة رقم 8
Model No. CF-Y5LWVYZBM *23 *24 Power Consumption Approx. 35 W / Approx. 60 W (maximum when recharging in the ON state) Physical Dimensions (W × H × D) 309.6 mm × 28 mm (at the front)/44.5 mm (at the rear) × 245.5 mm (excluding protru- sion) {12.2 " × 1.1 " / 1.8 " × 10.0 "} *25 Approx. 1530 g {3.4 lb.} Weight Environment Operation Temperature 5°C to 35°C {41°F to 95°F} Humidity 30% to 80% RH (No condensation) Storage Temperature -20°C to 60°C {-4°F to 140°F} Humidity 30% to 90% RH (No condensa
ملخص المحتوى في الصفحة رقم 9
*12 *19 When using an external display with a resolution of 2048 x Varies depending on the usage conditions, or when an 1536 dots, use a display that supports a 60Hz refresh rate. If optional device is attached. Measured when the power saving an external display that does not support a 60Hz refresh rate function on the USB2.0 USB Root Hub is set to on. (At the is used, images may not be displayed properly. time of purchase, the power saving function is activated.) *13 When Economy Mode (ECO)
ملخص المحتوى في الصفحة رقم 10
2 Names and Functions of Parts A B C D E J F G K H L M I N A :Speakers H :CD/DVD Drive B :Function Key I : CD/DVD Drive Power/Open Switch • Slide the switch to the right to open the disk cover. C :Keyboard • Slide the switch to the left to turn on/off the drive power. D :LED Indicator CD/DVD Drive Indicator : Caps lock • Off: Drive power is off. • Green: Drive power is on, but the drive is not accessed. : Numeric key (NumLk) • Blinking green: Drive power is on, and the drive is : Scroll loc
ملخص المحتوى في الصفحة رقم 11
H I A B M C J EXT. D K E N F G A :DC-IN Jack F : Headphone Jack B :Ventilation Hole You can connect headphones or amplified speakers. C :External Display Port When they are connected, audio from the internal If the Mini Port Replicator is connected to the com- speakers is not heard. puter, connect the external display to the external dis- G :SD Memory Card Slot play port on the Mini Port Replicator. You cannot use H :Bluetooth Antenna the external display port on the computer.
ملخص المحتوى في الصفحة رقم 12
3 Block Diagram Internal Core Frequency Internal Core Frequency Internal Core Frequency Internal Core Frequency HF HF HF HFM= M= M= M=1. 1. 1. 1.6 6 6 66 G 6 6 6 GH G GHz Hz Hz z/L ///LFM= LFM= LFM= FM=1. 1. 1. 1.0 0 G 0 G 0 G GHz (Hi Hz (Hi H Hz (Hi z (High Model) gh gh gh Mod Mod Model el el) ) ) H HF FM M= =1. 1.2 2 G GH Hz/ z/LFM= LFM=800 800 MHz (Low Mod MHz (Low Model) el) H HF FM M= =1. 1.2 2 G GH Hz z//LFM= LFM=800 800 MHz (Low Mod MHz (Low Model) el) V
ملخص المحتوى في الصفحة رقم 13
4 Diagnosis Procedure 4.1. Basic Procedures 13
ملخص المحتوى في الصفحة رقم 14
4.2. Troubleshooting Please take note of the following two points with regard to troubleshooting: 1. Know-how of diagnosis upon occurrence of heavy troubles, e.g. Set cannot be turned ON , Set fails to start , No display on screen , etc. 2. Explanation of each trouble, mainly symptom of trouble in operation. Flow Chart Pay attention to the following points when in pursuit of the cause of a troubleshooting. 1. Peripheral apparatus connected with the set should all be removed before opera
ملخص المحتوى في الصفحة رقم 15
5 Power-On Self Test (Boot Check) Outline of POST The set has a boot check function called POST (Power-On Self Test) in it. The condition of the main body is diagnosed by checking beep sound or error code. Start .............Test begins automatically when power switch is set to ON. Normal finish .....After memory checking, a beep sound is issued once and the set is placed into automatic stop. Note: If no error occurs, nothing is displayed. (No display of OK, etc.) Error Diagnosis by Checkin
ملخص المحتوى في الصفحة رقم 16
6 List of Error Codes The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems. If your system displays one of except the messages marked below wi
ملخص المحتوى في الصفحة رقم 17
02D0 System cache error - Cache disabled Contact Panasonic Technical Support. 02F0: CPU ID: CPU socket number for Multi-Processor error. 02F4: EISA CMOS not writable ServerBIOS2 test error: Cannot write to EISA CMOS. 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe Timer NMI Failed ServerBIOS2 test error: Fail
ملخص المحتوى في الصفحة رقم 18
7 Self Diagnosis Test As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and the enhancing test by the module of the main body building in are possible. Notes To skip BIOS password Use + key to skip BIOS password or authentication of fingerprint. This key is only for entering DIAG mode. Not available to boot the computer. If customer set "HDD Lock", the DIAG program cannot perform HDD test. *This key is for service purpose only. D
ملخص المحتوى في الصفحة رقم 19
2. Operation of PC-Diagnostic Utility -Only the device which can be inspected on the entire screen is displayed. -The item does not appear when the device of wireless LAN etc. is not physically connected. -The movement of the item must use an arrow key or a flat pad. -As for the device under the diagnosis, blue and yellow are alternately displayed at the left of the icon. - The diagnosis result of the device greens at the left of the icon when it is normal, and becomes red when abnormal. -
ملخص المحتوى في الصفحة رقم 20
2-1. Selection of tested device -To test only a specific device, "Test" and "Do not test" of each device can be selected. -The device which can select the enhancing test changes in order of "The standard is tested" and "Do not test" whenever the device icon is clicked. Start the standard test Do not test Please begin testing clicking if the selection of the tested device ends. 2-2. "PC-Diagnostic utility" End method When of "Close" on the right of the screen is clicked, t
