ملخص المحتوى في الصفحة رقم 1
S M
P A R T N E R I N G I N E S T H E T I C D I G I T A L D E N T I S T R Y
®
O D Y S S E Y
TM
Navigator
3 W AT T D I O D E L A S E R
Owners Manual
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Section 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Section 2 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1 Delivery System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS Section 4 Safety Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.1 Laser Safety Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.2 Continuing Education. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.3 In-Office Safety Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
TABLE OF CONTENTS Section 6 System Components: Preparations, Care and Maintenance . . . . . 28 6.0 Unit Dose Fiber Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 6.0.1 General......................................................................................................................................28 6.0.2 Replacing a Unit Dose Fiber Tip ...................................................................................
ملخص المحتوى في الصفحة رقم 5
Section 1 INTRODUCTION As dentists strive to create the perfect smile, they are often compromised by the technology they use in their practice. Respected leaders from the dental profession and dental equipment manufacturers have sought to identify the most practical and least invasive technology available to deliver restorative and preventive care. Today, thanks to continuing efforts by these industry leaders, we have seen the introduction of many new devices that have advanced the dental profes
ملخص المحتوى في الصفحة رقم 6
Section 2 SPECIFICATIONS 2.0 SPECIFICATIONS Weight: 2.5 lbs Dimension in inches (H X W X L): While in cradle - 9 1/2” X 4” X 6” Out of cradle – 7” x 4” x 3” Laser Classification (Per 60825): Laser Diode Class 4 Laser Device Wavelength: Laser 810 nm ±10 nm Aiming Beam 650 nm ±10 nm Beam Divergence: 9 degrees ± 1 degree Power Range: 100 mw to 3 Watts Hertz Rate in Pulsed Mode: fixed 10 Hz Pulse Duration: fixed 0.05 seconds Duty Cycle: pulsed mode 50% continuous wave 100% Aiming Beam (3 mW ): Yes A
ملخص المحتوى في الصفحة رقم 7
Section 2 SPECIFICATIONS 2.2 WARRANTY (ALSO SEE SECTION 8) Laser: 2 years Parts and Labor Rechargeable lithium polymer battery: 1 year Handpiece assembly: 6 months 2.3 PARTS LIST (1) Laser Unit (1) Fiber Cleaver (3) Protective Glasses (1) Package of (50) Unit dose fiber Handpiece Tips – Standard length, (6 mm) 60 degree angle (1) Handpiece assembly and (2) autoclavable sleeves (1) Wireless Foot Pedal (1) 9 Volt Battery (1) Power Cord (1) Hexdriver (1) Owner’s Manual (1) Training DVD (1) Clinical
ملخص المحتوى في الصفحة رقم 8
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.0 REMOVING THE LASER FROM THE PACKAGING 3.0.1 Unpacking the Laser & Dealer Assistance Your local authorized Ivoclar Vivadent dealer can provide a representative to assist you when you are ready to remove the laser from its shipping container. Do not attempt to unpack the laser and install the various components without reading this section first. If you are unsure about any aspect of the assembly, call your authorized dealer representative for assistance.
ملخص المحتوى في الصفحة رقم 9
Section 3 LASER ASSEMBLY INSTRUCTIONS Each of the following items should be inspected, inserted into the appropriate receptacle, and when applicable, locked or snapped into place. 3.1.1 Wireless Foot Pedal Installation Procedure 1. Make sure the laser is 8. Remove the battery from completely turned its packaging and attach off before replacing the the battery to the battery in the foot pedal. terminal, Fig. 3.1.1f. 2. Place the pedal face 9. Place the battery in the down on a hard, clean well, w
ملخص المحتوى في الصفحة رقم 10
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.2 Power Cord Installation Remove the power cord from the Odyssey Navigator package and plug the power cord into the appropriate receptacle on the back of the laser cradle. See Fig 3.1.2 Plug the power cord into a 110 Volt AC outlet rated at 60Hz. Use only the power supply that comes with the device. Use of other power supplies may damage the device or cause electrical shock. Fig 3.1.2 3.1.3 Direct Power Supply If immediate power is needed and the battery
ملخص المحتوى في الصفحة رقم 11
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.4 Connection of Handpiece Assembly to the Laser 1. The handpiece assembly is already installed when you receive your new Odyssey Navigator Diode Laser. Please leave the handpiece assembly connected to the laser unit unless you have to switch handpiece assemblies or if you have to ship the laser for technical reasons. Disconnecting the handpiece for even short periods can lead to contamination of the precision polished end of the fiber connector. This may
ملخص المحتوى في الصفحة رقم 12
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.5 Inserting the unit dose fiber tip into the handpiece Remove a unit dose fiber tip from its package, remove the plastic protective cap, and snap it into the handpiece. Figs 3.1.5a, 3.1.5b and 3.1.5c. Avoid placing your finger on either end of the handpiece tips as the tips are gamma irradiated and have to be clean for optimal performance and safety. Use gloves while handling the tips as natural oils on the fiber or fiber connection Fig 3.1.5a Fig 3.1.5b
ملخص المحتوى في الصفحة رقم 13
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.6 Placing the laser unit in the docking cradle Place the laser unit in the cradle by tipping the laser unit slightly forward and inserting it into the cradle. Fig 3.1.6. Do not force the unit into the cradle and be sure to place the fiber cord through the cradle opening. The Odyssey Navigator diode laser is supplied with a rechargeable lithium polymer battery which provides up to 45 minutes continuous lasing or 8 hours stand-by time, i.e. laser on, not b
ملخص المحتوى في الصفحة رقم 14
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.8 Emergency Shutdown Switch Before you activate the laser, make sure the red Laser Stop button is in the depressed position. The laser will activate only with the button in the depressed position. If the laser needs to be stopped quickly, pushing and releasing the red Laser Stop button will immediately shut the laser off. The Safety Alert Window will appear Fig 3.1.8a Fig 3.1.8b on the screen if the button is released. Button depressed— Button not depres
ملخص المحتوى في الصفحة رقم 15
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.11 Installation Test 1. After login, from the Main Menu, touch the “Quick Set Up” Button 2. The Odyssey Navigator is pre-set to “Continuous Wave” (CW) 3. Power setting is pre-set to 1.0W 4. Hold the fiber approximately 2-4 mm away from a piece of articulating paper. 5. Touch “Ready” button – laser is in “Ready” mode. A green checkmark will be displayed, Fig. 3.1.11, you will be able to see the aiming beam on the articulating paper at the end of the fiber
ملخص المحتوى في الصفحة رقم 16
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.13 Touch Screen Menu The Main Menu screen gives you the choice to use a ”Quick Set Up” (Fig 3.1.13a) - with settings you designate for each procedure–or you may select a pre-set program sorted in alphabeti- cal order under the “Procedures”, or under the “Specialty” categories, Fig. 3.1.13b. The settings are portrayed with four adjustable settings: Mode, Power, Time and Aiming Beam. The settings can be changed as desired for Fig 3.1.13a Fig 3.1.13b any of
ملخص المحتوى في الصفحة رقم 17
Section 3 LASER ASSEMBLY INSTRUCTIONS Aiming Beam The Odyssey Navigator diode laser is actually two lasers in one, the infrared 810 nm wavelength laser which performs the actual treatment of the soft tissue, the “working beam” and the 650 nm “laser pointer” which illuminates the focal point of the “working beam” allowing the operator to aim prior to and during laser activation. In addition, the aiming beam control allows for five levels of illumination ranging from off to maximum intensity. The
ملخص المحتوى في الصفحة رقم 18
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.1.14 Preset Programs The Odyssey Navigator comes with procedure specific settings installed. The Procedures are accessed from the Main Menu by depressing “Procedures.” Procedures may also be accessed through the “Specialty” category. By accessing in this way, the procedures are sorted according to speciality, Fig. 3.1.14. After selecting a procedure, the settings may be manually adjusted to suit your needs during a clinical procedure. The settings represen
ملخص المحتوى في الصفحة رقم 19
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.2 EVALUATING THE FACILITY AND ENVIRONMENTAL CONSIDERATIONS In order to insure the safe use of the laser in your facility, please check to make sure that the proposed location has the following: 3.2.1 Power Requirements 110 - 240 V AC ±10 % at 50 - 60 Hz 3 Amps 9 volt Lithium battery for the foot pedal 3.2.2 Heating and Ventilation The laser should be operated in areas with the optimum temperature range of 20º - 30ºC (68º - 86º F). 3.2.3 Transport and Stora
ملخص المحتوى في الصفحة رقم 20
Section 3 LASER ASSEMBLY INSTRUCTIONS 3.2.8 Odyssey Navigator Diode Laser Frequency The Odyssey Navigator diode laser wireless technology is electronically coded. Each pedal and Odyssey Navigator diode laser share a UNIQUE SERIAL NUMBER INTERLOCK protocol for reliable operation: • An Odyssey Navigator pedal communicates with only one Odyssey Navigator diode laser; there is 2-way electronic code which must be verified for every transmission and acknowledgement. The pedal and laser unit are interl
