ملخص المحتوى في الصفحة رقم 1
User Instructions
TRACTOR LIFT
Model Number 610.24600
• Provides access to mower deck for easy
cleaning and service
• Fits all 1985 through current models
of CRAFTSMAN front engine tractors
and Zero Turn Mowers
• Can be fitted to most major front engine tractor brands
Patent Pending
• Adjustable arms for greater versatility
• Extra heavy duty gauge steel construction
• If you read and follow these instructions, this product can be
assembled in approximately 20 minutes
• Assemble unit on cardbo
ملخص المحتوى في الصفحة رقم 2
SAFETY INSTRUCTIONS WARNINGS • Be sure to read and follow all safety instructions and • Always use the stabilizer bar provided when using tractor lift. warnings. Failure to follow these instructions may result in Make sure stabilizer bar is properly in place before starting any damage to the product and/or serious personal injury. work on tractor. • Danger of serious personal injury exists. Serious personal • Read and understand all safety and operating instructions injury can occur when usin
ملخص المحتوى في الصفحة رقم 3
Carton Contents 8 3 11 4 6 2 10 1 7R 7L REF NO QTY PART NUMBER DESCRIPTION REF NO QTY PART NUMBER DESCRIPTION 1 1 51001 Angle Frame Assembly 7L 1 410131 Tractor Mounting Bar - Left 2 1 51002 Handle Top 7R 1 410132 Tractor Mounting Bar - Right 3 1 51003 Handle Bottom 8 1 51006 Stabilizer Bar 4 2 41009 Lift Tube Assembly 10 1 310031 Hardware Bag 6 1 51005 Lift Cross Tube 11 1 310041 Assembly Manual OPERATION MAINTENANCE Tractor Lift can be used out of the box on all Craftsman tractors Store unit i
ملخص المحتوى في الصفحة رقم 4
Hardware Contents 34 38 37 35 29 23 27 39 33 36 25 22 26 24 28 FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T. Page 4.
ملخص المحتوى في الصفحة رقم 5
2.00000000 2.00000000 10.00000000 10.00000000 DETAIL I SCALE 1 : 5.5 I I Setting up Lift Mounting Hardware - Tractor Front Tractor Lift can be used out of the box on all Craftsman tractors with bumpers or brush guards. Tractor Lift mounting hardware is provided. If your tractor does not have a bumper or brush guard, follow the steps below: Note: Left and Right sides are determined by standing behind tractor looking forward. 24 7R 29 27 7L 26 6 "X" 26 38 Remove, add washer ( 24 ), replace. Ste
ملخص المحتوى في الصفحة رقم 6
Assemble Tractor Lift Attach Lift Tubes to Angle Frame • Lift tubes come pre-assembled. Attach lift tube assemblies ( 4 ) to angle frame ( 1 ) using bolts ( 22 ), flat washers ( 24 ), split lock washers ( 23 ) and hex nuts ( 25 ). • Secure rear of lift tube assembly ( 4 ) to angle frame ( 1 ) using bolts ( 29 ), flat washers ( 24 ), split lock washers ( 23 ) and hex nuts ( 25 ). Note: Over-tightening receiver bolts ( 22 ) could cause damage to lift tubes ( 4 ). Determining the width between lif
ملخص المحتوى في الصفحة رقم 7
Assemble Tractor Lift Attach Handle to Angle Frame Step 1. Attach handle bottom ( 3 ) to angle frame ( 1 ) using hex bolt ( 22 ), flat washer ( 24 ), split lock washer ( 23 ) and hex nut (25 ). Step 2. Insert ring grip pin ( 30 ), as shown. Step 3. Insert handle top ( 2 ) into handle bottom ( 3 ). Secure with hex bolt ( 33 ), flat washer ( 24 ), split lock washer ( 23 ) and hex nut (25 ). Step 4. Place handle grips ( 37 ) onto handle top tube ( 2 ). A little
ملخص المحتوى في الصفحة رقم 8
Assemble Tractor Lift Attach Stabilizer Bar Step 1. Slide stabilizer bar ( 8 ) onto foot bar tube as shown. Step 2. Press snap button and slide stabilizer bar against handle. Step 3. Insert ring grip pin ( 30 ) through stabilizer bar and handle top. Foot bar tube Snap button 8 30 FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T. Page 8.
ملخص المحتوى في الصفحة رقم 9
ملخص المحتوى في الصفحة رقم 10
OPERATION Using the Tractor Lift Step 3. Engaging Stabilizer Bar Stabilizer bar MUST be engaged immediately after raising the tractor. WARNING: Failure to engage stabilizer bar may result in serious personal injury and or property damage. • Remove ring grip pin ( 30 ) from tube handle. Press snap button and slide stabilizer bar ( 8 ) from foot bar tube. • Turn stabilizer bar 180 degrees as shown at bottom of Figure 1. • Position stabilizer bar under base of unit between wheels. • Slide stabi
ملخص المحتوى في الصفحة رقم 11
Repair Parts List 2 MODEL NUMBER - 610.24600 37 37 33 23 24 Peel off backing, 25 adhere to 8 38 39 handle. 3 40 38 9 30 22 23 1 23 30 25 29 4 20 26 5 24 38 25 22 6 24 30 23 4 25 35 5 9 7L 38 21 7R 34 26 20 36 FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T. Page 11.
ملخص المحتوى في الصفحة رقم 12
CRAFTSMAN THREE YEAR LIMITED WARRANTY If this Craftsman product fails due to a manufacturer's defect within three years from the date of purchase, return it to any Sears store or other Craftsman outlet in the United States for free replacement. This warranty does not include wearing off or fading of product paint, nor replacement of product wheels or tires. This warranty is void if this product is ever used for commercial or rental purposes. This warranty gives you specific legal rights, and
ملخص المحتوى في الصفحة رقم 13
Get it fixed, at your home or ours! Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and wate
