Dixon BLOUNT 3301 دليل المستخدم

ملخص المحتوى في الصفحة رقم 4

Page 4 of 8 3301 BODY ASSEMBLY

ملخص المحتوى في الصفحة رقم 5

Page 5 of 8 3301 CHASSIS ASSEMBLY

ملخص المحتوى في الصفحة رقم 6

Page 6 of 8 3301 TRANSAXLE ASSEMBLY

ملخص المحتوى في الصفحة رقم 7

3301 MOWER DECK ASSEMBLY 30”

ملخص المحتوى في الصفحة رقم 8

Page 8 of 8 3301 WIRING ASSEMBLY

ملخص المحتوى في الصفحة رقم 1

DIXON INDUSTRIES, INC. A
BLOUNT COMPANY AIRPORT

INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 673370945
316 251 2000
FAX 316 251 4117



TECHNICAL DATA BROCHURE
Model 3301
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3954
from transaxle backing plate, raise and
push body and seat assembly forward.
2. Loosen four seat bolts P/N 3006 and
slide seat forward or backward to
desired position.

ملخص المحتوى في الصفحة رقم 2

BODY REMOVAL 1. The 3301 has a 2-piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove the upper body to service the transaxle. 2. To remove the upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283. Disconnect seat switch P/N 4761 at plug-in. 3. Reverse above procedure to reinstall. ADJUSTMENT OF MOWER DECK DRIVE BELT 1. The mower deck drive belt is

ملخص المحتوى في الصفحة رقم 3

MOWER BLADE OPERATION To engage the mower blades, turn lever on floor slowly to the "ON" position. To disengage mower blades, turn lever slowly to the "OFF" position. SAFETY CHECKS IMPORTANT - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS 1. After reassembly, while seated on mower, attempt to start engine with mower deck engaged. Engine should not start. If engine does start, return the mower to an Authorized Dixon dealer for adjustment or repair. 2. Disengage mower dec