ملخص المحتوى في الصفحة رقم 1
Harrier 41 Electric
CODES
309C 311C
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO’s:
309C001001, 311C001001 HANDBOOK: 309054 (REV .0.)
ISSUE 28.09.04
ملخص المحتوى في الصفحة رقم 2
MAIN FEATURES /SPECIFICATIONS Main Features 5 6 4 1 Handlebar Securing Knob. 2 Switch Cable. 3 3 Switch Control Unit. 11 4 Switch Control Lever. 2 5 Handlebar. 6 Cable Cleat. 7 Grassbag Assembly. 8 Rear Deflector. 9 Serial No. Decal. 1 10 Height Adjuster Handle. 11 Supply Cable. 7 8 9 10 1C309L02A Specifications Code 309C 311C Supply 230V~50Hz 230V~50Hz Rated Input 1.5 kW 1.5 kW Fuse Rating 13A 13A Weight 25.5 Kg 25.5 Kg Cutterblade Speed 2950rpm 2950rpm Cutting width 410mm 410mm Cutting heig
ملخص المحتوى في الصفحة رقم 3
CONTENTS 1.2 Main Features/Specifications 1.19 - 1.22 Mower Maintenance 1.19 - Deck Housing 1.3 Contents 1.19 - Securing Nuts and Bolts 1.19 - Lubrication 1.4 Introduction 1.19 - Motor 1.19 - Switch Control Unit 1.5 Warranty 1.20 - Cutterblade Removal 1.20 - Cutterblade Assembly 1.6 - 1.9 Safety Precautions 1.21 - Cutterblade Sharpening 1.21 - Supply Cable 1.9 Safety Symbols 1.22 - Storage 1.9 Decal Symbols 1.10 Assembling the Mower 1.10 - Delivery Checklist 1.23 - 1.24 Trouble Shooting 1.10
ملخص المحتوى في الصفحة رقم 4
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance. If you
ملخص المحتوى في الصفحة رقم 5
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty registration c
ملخص المحتوى في الصفحة رقم 6
SAFETY PRECAUTIONS Safety Alert Symbol his safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Read the instructions carefully. Ensure that you are familiar with the con- trols and the proper use of the equipment. Learn how to stop the mower quickly
ملخص المحتوى في الصفحة رقم 7
SAFETY PRECAUTIONS Preparation Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts and screws for tightness. Use only gen- uine Hayter parts. Damaged cutterblades and loose fixing bolts are major hazards. Before use, visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immediately with a genuine Hayter replacement part. Cutterblades which are slightly worn can be resharpened. Ensure that
ملخص المحتوى في الصفحة رقم 8
SAFETY PRECAUTIONS Operation Use extreme caution when reversing or pulling the mower towards you. Switch off if the mower has to be tilted for transportation when cross- ing surfaces other than grass and when transporting the mower to and from the area to be mowed. Never operate the mower unless the guards are securely in position and in good condition. Start the mower carefully, with feet well away from the cutterblade. Do not tilt the front of the mower more than is absolutely necessary when s
ملخص المحتوى في الصفحة رقم 9
2 4 6 SAFETY PRECAUTIONS Safety Symbols Safety Alert - Be aware to the Danger of severing toes or fin- Danger of being hit by thrown possibility of injury. gers in cutting mechanism. objects. Carefully read the Owners Switch off and remove plug Keep bystanders at a safe dis- Handbook before using the from mains before performing tance from the mower. machine. maintenance or repair work. Control Symbols Switch Height of Cut Indicator Height of Cut Adjustment (Symbol) (Symbol) (Symbol) 305113 CS
ملخص المحتوى في الصفحة رقم 10
ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Owner’s Handbook. 2. Grassbag. 3. Supply Cable - (309C Only) To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the han- dlebar to pivot. Unfold the handlebar to the operating position, before
ملخص المحتوى في الصفحة رقم 11
OPERATING THE MOWER Electrical Connection Position the mower on the grass area to be cut. Carefully uncoil the supply cable clear of the mower and take the plug end connection to the mains socket outlet. Ensure that the mains socket is switched 'OFF' before locating the RCCB unit - Refer to "Safety Precautions" - Preparation. Switch 'ON' and check the operation of the RCCB unit. Switch 'OFF' before installing the mower supply cable plug and final- ly switch on. Starting Locate the switch control
ملخص المحتوى في الصفحة رقم 12
OPERATING THE MOWER Stopping Release the motor switch control lever to stop the motor. WARNING: AVOID ACCIDENTS - The cutterblade may contin- ue to rotate after the mower is switched off Height of Cut Hold the trigger against the handle and raise or lower the mower using the handle to achieve the desired height of cut. Release the trigger to secure the mower at the required position. There are seven height of cut positions. The setting is indicated by the position of the connecting rod relative
ملخص المحتوى في الصفحة رقم 13
OPERATING THE MOWER Grassbag Raise the rear deflector and lift the grassbag through the handlebar and lower the rear deflector to rest against the rear of the mower. To empty the grassbag, pour out the grass clippings and shake the grassbag vigorously to clean the airways. Good grass collection depends on good air flow through the grassbag. When collecting grass clippings it is important that the grassbag is emptied 80V21C regularly to prevent blockages and motor overloading. Without Grass Co
ملخص المحتوى في الصفحة رقم 14
OPERATING THE MOWER Safe Mower Practice WARNING: PREVENT ACCIDENTS -Take extreme care do not mow across the supply cable. If this should occur, switch off immedi- ately and disconnect the plug from the power supply. Carefully exam- ine the cable for cuts and damage. A defective cable must be replaced before the mower is used again. Always be aware of the location of the supply cable in relationship to the mower and the grass area. Do not allow the cable to become hidden in uncut grass. Keep the
ملخص المحتوى في الصفحة رقم 15
OPERATING THE MOWER Overloading Protection Do not let the motor labour or slow down through being overloaded in work. When this situation occurs, raise the front of the mower slightly by bearing down on the handlebar, allow the motor to reach maximum speed and proceed to mow at a slower pace. Alternatively readjust to a higher cut position. If the motor continues to labour, switch off and remove the plug from the mains supply. Remove and empty the grass- bag. Examine the discharge chute and remo
ملخص المحتوى في الصفحة رقم 16
LAWN CARE CALENDAR To be used as a guide only.. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The first cut should merely “top” the grass a
ملخص المحتوى في الصفحة رقم 17
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand. November Use a stiff broom to dispers
ملخص المحتوى في الصفحة رقم 18
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. Daily Remove grass debris from around the motor and air ways in the cowl and underside of the deck housing. Remove grass debris from the grassbag and check for signs of damage. Check the condition of guards and safety devic
ملخص المحتوى في الصفحة رقم 19
MOWER MAINTENANCE Deck Housing Remove grass debris from the top and underside of the deck housing immediately after use. To prevent accidents fertilisers and top dressings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treated grass and store well away from corrosive materials. Securing Nuts & Bolts Regularly check that all securing nuts and bolts are tight. Replace missing or damaged items immediately. 1CG480V36B Lubrication Lubricate the wheels, pivot poi
ملخص المحتوى في الصفحة رقم 20
MOWER MAINTENANCE Cutterblade Removal Turn the mower on its side. Firmly grip the end of the cutterblade with a gloved hand and remove the bolt. The carrier may be removed from the shaft. This should be cleaned and replaced. Ensure that the flats on the shaft locate correct- ly with the flats on the carrier. Ensure that the new cutterblade is the correct way up with the turned edges facing towards the motor before locating onto the two carrier pins. Secure the cutterblade fixing bolt- insulating
