Land Pride 701-069A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Lift Motor, Snow Blade
Assembly Instructions
Manual No. 701-149M
Treker NT & ST TrekerSeries
THANK YOU FOR YOUR PURCHASE OF OUR SNOW
Before You Start
PLOW
ENCLOSED IN THIS KIT IS THE UNIVERSAL
When you see this symbol, the subsequent
ELECTRIC LIFT HARDWARE 701-069A
instructions and warnings are serious - follow
!
TO HAVE A COMPLETE PLOW ASSEMBLY, YOU
without exception. Your life and the lives of
MUST HAVE AT LEAST FOUR BOXES:
others depend on it!
1. MODEL SPECIFIC ATTACHING HARDWARE KIT.
TO ATTA

ملخص المحتوى في الصفحة رقم 2

Land Pride Assembly Instructions installed ! CAUTION TO AVOID PERSONAL OR OTHER INJURY: OPERATION TIPS 1. READ BLADE OWNER’S MANUAL, MACHINE’’’S When plowing snow or dirt into a pile, back away from the OPERATOR’S MANUAL, AND SAFETY DECALS pile before attempting to raise the blade BEFORE OPERATING. ! For best results set the suspension to the stiffest setting 2. WEAR HEAD PROTECTION, SAFETY GLASSES, if possible AND SHOES AS RECOMMENDED IN ATV ! The Blade is shipped with the Blade Skids mounted O

ملخص المحتوى في الصفحة رقم 3

Land Pride Assembly Instructions Attach the Lift Strap (#6) to the front of the machine. The Strap needs to be secured to the machine in such a manner that it will support the Blade and be as close to straight above the Cable Spool of the Electric Lift as possible. Have the end of the Lift Strap (#6) be roughly 20" above the ground. Attach the 3/16" Quick Link (#8) to the end of the Lift Strap as shown. Do not attach the cable at this time. 06/21/07 Manual No. 701-149M 3

ملخص المحتوى في الصفحة رقم 4

Land Pride Assembly Instructions Route the Red and Black wires to the battery. These wires must be well clear of any moving parts on the machine Do not allow the wires to come in contact with any hot parts of the machine, such as the exhaust or cylinder head. Secure the ring terminal on the black wire to the battery negative post. Install the ring terminal on the red-white wire to the positive battery terminal. Route the red and brown leads of the Wiring Harness (#27) to the front of the machine

ملخص المحتوى في الصفحة رقم 5

Land Pride Assembly Instructions is a fuse in the fuse holder. Turn the key switch to the on Run the spool in the direction necessary to end up with position and test run the lift motor by pressing the up one wrap of cable on the spool and the cable to the front button on the handlebar switch. side of the spool. Verify that pressing the up button on the handle bar With the blade resting on the ground, route the end of the switch causes clockwise rotation of the spool when cable up through the qu

ملخص المحتوى في الصفحة رقم 6

Land Pride Listing of Parts Kit No. 701-069A ELECTRIC LIFT KIT Item Part No. Part Description Qty 1 EL100B GEAR MOTOR 1 2 EL120 GEAR PULLEY 1 3 EL121A MOTOR MOUNT PLATE 1 4 EL113 1 1/4" SPACER 4 5 EL122A BRG PLATE 1 6 PUR1481 LIFT STRAP 1 7 CC18 1/8" CABLE CLAMP 1 8 U605 3/16" QUICK LINK 1 9 EL123 36" CABLE 1 10 EL124 O-RING 1 11 802-152C HHCS 1/4-20X2 GR5 2 12 802-017C HHCS 3/8-16X1 GR5 2 13 ELRELAY RELAY 1 14 WNRSHOUSING SWITCH HOUSING 1 15 WNRSWITCH-3 R-3 SWITCH 1 16 CVC1316 13/16" CABLE CLAM