ملخص المحتوى في الصفحة رقم 1
OPERATOR’S
MANUAL
Freedom Z
Models: SFZ36-17KA
SFZ36-20BS
SFZ48-19KA
SFZ48-26BS
SFZ52-19KA
SFZ52-26BS
SFZ61-28BS
Congratulations on owning a Scag mower! This manual contains the operating
instructions and safety information for your Scag mower. Reading this manual
can provide you with assistance in maintenance and adjustment procedures to
keep your mower performing to maximum efficiency. The specific models that
this book covers are listed on the inside cover. Before operating your ma
ملخص المحتوى في الصفحة رقم 2
WARNING FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY OR DEATH. • Read this manual completely as well as other manuals that came with your mower. • DO NOT operate on steep slopes. To check a slope, attempt to back up it (with the cutter deck down). If the machine can back up the slope without the wheels slipping, reduce speed and use extreme caution. • Under no circumstances should the machine be operated on slopes greater than 15 degrees. ALWAYS FOLLOW OSHA APP
ملخص المحتوى في الصفحة رقم 3
R Table of Contents Table of Contents SECTION 1 - GENERAL INFORMATION ...................................................................................1 1.1 INTRODUCTION ...........................................................................................................................................1 1.2 DIRECTION REFERENCE ...........................................................................................................................1 1.3 SERvICING THE ENGINE AND DRIvE TRA
ملخص المحتوى في الصفحة رقم 4
R Table of Contents SECTION 6 - ADJUSTMENTS .................................................................................................21 6.1 PARKING BRAKE ADJUSTMENT ............................................................................................................21 6.2 TRAvEL ADJUSTMENTS ..........................................................................................................................22 6.3 THROTTLE CONTROL AND CHOKE ADJUSTMENTS .........................
ملخص المحتوى في الصفحة رقم 5
R Section 1 GENERAL INFORMATION USE ONLY SCAG APPROvED ATTACHMENTS AND 1.1 INTRODUCTION ACCESSORIES. Your mower was built to the highest standards in the Attachments and accessories manufactured by companies industry. However, the prolonged life and maximum other than Scag Power Equipment are not approved for use efficiency of your mower depends on you following the on this machine. See Section 8, Paragraph 8-1. operating, maintenance and adjustment instructions in this manual. If additio
ملخص المحتوى في الصفحة رقم 6
R Section 1 1.4 SYMBOLS SYMBOL DESCRIPTION SYMBOL DESCRIPTION Choke Transmission Parking Brake Spinning Blade 48071S On/Start Spring Tension on Idler Off/Stop Oil Falling Hazard Thrown Object Hazard Fast Slow Continuously Variable - Linear Cutting Element - Basic Symbol Pinch Point Cutting Element - Engage 481039S Hour meter/Elapsed Operating Hours Cutting Element - Disengage STT MODELS CE Mark Seat must be installed under the seat hold down bracket during installation
ملخص المحتوى في الصفحة رقم 7
R Section 2 SAFETY INFORMATION 2.1 INTRODUCTION DANGER Your mower is only as safe as the operator. Carelessness or operator error may result in serious bodily injury The signal word “DANGER” denotes that an extremely or death. Hazard control and accident prevention are hazardous situation exists on or near the machine that dependent upon the awareness, concern, prudence, and could result in high probability of death or irreparable injury proper training of the personnel involved in the o
ملخص المحتوى في الصفحة رقم 8
R Section 2 7. If the operator(s) or mechanic(s) cannot read English 12. DO NOT add fuel to a running or hot engine. Allow or Spanish, it is the owner's responsibility to explain the engine to cool for several minutes before adding this material to them. fuel. Never fuel indoors or inside enclosed trailers. 8. DO NOT wear loose fitting clothing. Loose clothing, 13. Keep flammable objects (cigarettes, matches, etc.), jewelry or long hair could get tangled in moving open flames and sparks away
ملخص المحتوى في الصفحة رقم 9
R Section 2 3. To prevent tipping or loss of control, start and stop 15. The machine and attachments should be stopped smoothly, avoid unnecessary turns and travel at and inspected for damage after striking a foreign reduced speed. Use caution when operating the object, and damage should be repaired before mower on an incline with the optional grass catcher restarting and operating the machine. installed. 4. When using any attachment, never direct the discharge of material toward bystanders
ملخص المحتوى في الصفحة رقم 10
R Section 2 2.5 ROLL-OvER PROTECTION SYSTEM INSPECT BUCKLE & LATCH WARNING INSPECT WEBBING The seat belt must be securely fastened during operation. Failure to do so could cause serious injury or loss of life. Figure 2-1. Seat Belt Inspection This mower has been designed for good traction and stability under normal mowing conditions. However, caution WARNING must be used when traveling on slopes, especially when the grass is wet. Do not mow on wet grass. Wet grass reduces Reduce speed wh
ملخص المحتوى في الصفحة رقم 11
R Section 2 2.6 MAINTENANCE CONSIDERATIONS & STORAGE WARNING 1. Never make adjustments to the machine with the Hydraulic fluid is under high pressure. Keep engine running unless specifically instructed to do body and hands away from pinholes or nozzles so. If the engine is running, keep hands, feet, and clothing away from moving parts. that eject hydraulic fluid under high pressure. If you need service on your hydraulic system, 2. Disengage drives, lower implement, set parking please
ملخص المحتوى في الصفحة رقم 12
R Section 2 2.8 SAFETY AND INSTRUCTIONAL DECALS 483405 483505 483402 481568 483633 483406 Failure to follow these instructions could result in serious injury or death. DO NOT operate machine on steep slopes or near drop 483425 offs. Avoid sharp and/or quick turns. DO NOT exceed the machine weight rating. Always use seatbelt. DO NOT jump if machine tips. DO NOT repair or modify roll 483660 bar. Any alteration of the roll bar will void certification if not approved by manufacturer. 482291 483467 2
ملخص المحتوى في الصفحة رقم 13
R Section 3 SPECIFICATIONS 3.1 ENGINE General Type ................................................................................................Heavy Duty Industrial/Commercial Gasoline Brand ......................................................................................................................................Briggs & Statton, Kawasaki Horsepower: (Scag Model SFZ36-17KA) ......................................................................................17 HP (Spec.#FH541V-AW
ملخص المحتوى في الصفحة رقم 14
R Section 3 Travel Speed: Forward ..........................................................................................................................................................0-8 MPH Reverse ..........................................................................................................................................................0-5 MPH -NOTE- The machine will travel at 8 mph for transport purposes. For best cutting performance the forward travel speed should be adjus
ملخص المحتوى في الصفحة رقم 15
R Section 4 OPERATING INSTRUCTIONS 1. Ignition Switch (Figure 4-1). The ignition switch is used to start the engine and has three positions; CAUTION OFF, ON, and START. 2. Mower Deck Switch (Figure 4-1). Used to engage Do not attempt to operate this mower unless you and disengage the mower drive system. Pulling up have read this manual. Learn the location and on the switch will engage the deck drive. Pushing purpose of all controls and instruments before down on the switch will diseng
ملخص المحتوى في الصفحة رقم 16
R Section 4 6. Hourmeter (Figure 4-1). Indicates the number of 12. Deck Lift Foot Lever (Figure 4-1). Used to raise hours the engine has been operated. It operates and lower the cutter deck. whenever the engine is running. Has preset 13. Cutting Height Adjustment (Figure 4-1). Used to maintenance reminders for engine and hydraulic set the cutter deck at the desired cutting height. system oil changes. Will start flashing scheduled maintenance 2 hours before preset time and 14. Deck Relea
ملخص المحتوى في الصفحة رقم 17
R Section 4 5. Check interlock system for proper operation. (See Start practicing with a slow engine speed and slow Section 4.2.) forward travel. 6. Check tire pressure. Adjust pressure if necessary. Learn to feather the steering controls to obtain a (See Section 7.10.) smooth operating action. Practice operating the mower until you are 4.4 STARTING THE ENGINE comfortable with the controls before proceeding to mow. CAUTION FORWARD TRAvEL DO NOT USE STARTING FLUIDS. Use of starting To trave
ملخص المحتوى في الصفحة رقم 18
R Section 4 REvERSE TRAvEL 4.6 ENGAGING THE DECK DRIvE (CUTTER BLADES) 1. Set the throttle at about 3/4 speed. Do not attempt to CAUTION engage the deck drive at high speed as this shortens the electric clutch life — use only moderate engine speed when engaging the deck drive. Disengage power to the mower before backing up. Do not mow in reverse unless absolutely 2. Engage the deck drive by pulling out on the yellow necessary and then only after observation of the switch, located on the
ملخص المحتوى في الصفحة رقم 19
R Section 4 6. Turn the ignition key to the OFF position and remove 4.7 HILLSIDE OPERATION the key. 4.9 AFTER OPERATION WARNING 1. Wash the entire mower after each use. Do not use high pressure spray or direct the spray onto DO NOT operate on steep slopes. To check a slope, electrical components. attempt to back up it (with the cutter deck down). If the machine can back up the slope without the - IMPoR t ANt - wheels slipping, reduce speed and use extreme Do not wash a hot or running eng
ملخص المحتوى في الصفحة رقم 20
R Section 4 1. If the discharge chute becomes clogged, shut off 7. Operate the engine at full throttle for best cutting. the engine and remove the ignition key. Using a stick Mowing with a lower RPM causes the mower to tear or similar item, dislodge the clogged material. Then the grass. The engine is designed to be operated at resume normal mowing. full speed. 8. Use the alternate stripe pattern for best lawn 4.11 MOvING MOWER WITH ENGINE appearance. Vary the direction of the stripe each S
