ملخص المحتوى في الصفحة رقم 1
OWNER’S
MANUAL
FROM SERIAL #96-
354001 TO L199-307000
MODEL NO.
T1260
T1360
60” UNIVERSAL
TRAILMOWER
Assembly
Operation
Service and Adjustment
Rev.05-193
Repair Parts
Made In The
P.O. BOX 67, WARRENSBURG, MISSOURI 64093 PHONE 660-747-8183 FAX 660-747-8650
Manufacturing quality lawn care equipment since 1945
USA
10829
ملخص المحتوى في الصفحة رقم 2
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1) Engine Warranty All engines utilized on our products have a separate
ملخص المحتوى في الصفحة رقم 3
• Exercise special care when mowing Safety Rules around fixed objects in order to prevent the blades from striking them. Never Safe Operation Practices for Trailmowers deliberately run mower onto or over any foreign object. Important: This cutting machine is capable of • Use mower only as the manufacturer intended and as described in the manual. amputating hands and feet, and throwing • Do not operate the mower if it has been objects. Failure to observe safety dropped or damaged
ملخص المحتوى في الصفحة رقم 4
• Watch for holes, ruts or bumps. Uneven IV. Service terrain could overturn the machine. Tall grass can hide obstacles. • Use extra care handling gasoline and other • Use slow speed. Choose a low gear so fuels. They are flammable and vapors are that you will not have to stop or shift explosive. while on the slope. o Use only an approved container. • Keep all movement on the slopes slow o Never remove gas cap or add fuel and gradual. Do not make sudden with the engine running. ch
ملخص المحتوى في الصفحة رقم 5
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. OD42 Warning Decal OD43 Danger Decal 5
ملخص المحتوى في الصفحة رقم 6
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. 44 Caution Decal 47 No Step Decal OD OD 45 Danger Decal OD 48 Blade Decal OD 46 Speed Decal 49 Engine Power Decal OD OD 6
ملخص المحتوى في الصفحة رقم 7
Operating Your New Mower The operation of any mower can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your mower and while mowing. We recommend wide vision safety mask for over the spectacles or standard safety glasses. Caution: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to the machine and the mowing activity. N
ملخص المحتوى في الصفحة رقم 8
Caution: Caution: Shut off mower and remove Shut off mower and remove spark plug wire before making spark plug wire before making any adjustments to the mower. any adjustments to the mower. Cutting Height Adjustments • Rotate height adjust crank handles (item #8 Tow Hitch Offset Assembly and #5 in fig. 4) in a clockwise direction to • Please refer to figure 2 for the assembly of raise the mower and in a counter-clockwise the hitch bar. direction to lower. • Make
ملخص المحتوى في الصفحة رقم 9
Breaking in Your Mower Suggested Mowing Practices Break in your belts, pulleys, and engine before you • Mowing should be started with tractor in low actually begin mowing. gear and speed increased only as mowing • Start engine, engage blade control to start conditions will safely permit. This speed blades rotating and allow blades to rotate for should not exceed 3-1/2 MPH. approximately five minutes to break in mower • Better mowing results will be obtained in and engine. grassy areas if
ملخص المحتوى في الصفحة رقم 10
Mower Maintenance General Recommendations • To remove blade for sharpening, use wooden The warranty on this Trailmower does not cover items block to hold blade while removing the blade- that have been subjected to operator abuse or mounting nut. The nuts have right hand negligence. To receive full value from the warranty, threads. operator must maintain unit as instructed in this • When grinding, care should be taken to manual. maintain blade balance and the blade should be c
ملخص المحتوى في الصفحة رقم 11
LEFT RIGHT BLADE DRIVER NB175 (A108) NB175 (A108) ASSEMBLIES (Prior AS155 to 97-231001) AS155 6104 6104 FIGURE 1A 6104RS NB179 (B104W) NB179 (B104W) B98 B98 B99 B99 B100LS B100S CENTER B98 B98 NB175 (A108) AS155 687 NB179 (B104W) B98 B9960 Blade Driver Assemblies Center – B99CCS Left – B99CLS B100CS Right – B99CS B98 B98W B108LB B102 660S – single Same for all three blade 660 – set (3) driver positions B102 For a complete set B108L (minus the blade) for B108 one blade driver order B100SK 1
ملخص المحتوى في الصفحة رقم 12
LEFT RIGHT BLADE DRIVER NB175 (A108) NB175 (A108) ASSEMBLIES (After AS155 97-231001) AS155 6114 6114 FIGURE 1B 6104RS NB179 (B104W) NB179 (B104W) CENTER B98 B98 NB175 (A108) B99 B99 AS155 B100LS 6114CS B100S 6114 B98 B98 687 NB179 (B104W) B98 B9960 Blade Driver Assemblies Center – B99CCS Left – B99CLS B100CS Right – B99CS B98 B98W B108LB B102 660S – single Same for all three blade 660 – set (3) B102 driver positions For a complete set B108L (minus the blade) for B108 one blade driver order
ملخص المحتوى في الصفحة رقم 13
H11 H11 H10 661 H11 H11 662 661A Hitch Bar Assembly Figure 2 Brown M S B Green Kill G L Key Switch Battery Red Black Red Red To Alternator Solenoid Red T60 12V Start Figure 3 13
ملخص المحتوى في الصفحة رقم 14
02 04 05 03 06 01 08 07 52 53 09 10 08 11 12 13 14 15 Figure 4 14
ملخص المحتوى في الصفحة رقم 15
16 17 19 18 20 22 21 23 16 21 20 25 24 24 26 Figure 5 15
ملخص المحتوى في الصفحة رقم 16
28 27 27 18 22 23 27 27 28 29 Figure 6 16
ملخص المحتوى في الصفحة رقم 17
OBSOLETE PART NUMBERS ARE SHOWN IN ( ) AND ARE FOR NB122 (665N) REFERENCE ONLY NB195 (665TW) B98 NB195 (665BW) 665 + Color Code 663S NB121 (T2K) F4157WR CB58 691 F4157WV CB58 NB151 (670) F4157WT 663L NOTE: F4157WF 13X500X6 contains Wheel, Tire and Bearings CASTER ASSEMBLY Figure 7 17
ملخص المحتوى في الصفحة رقم 18
Item # Description Part # 1 Grass Chute (CH5) 6031TK Bolt/Nut (CH5B) NB136 Spring CH5S 2 Tire/Wheel/Bearing F4157W 3 Right Belt Guard 6155RN Acorn Nut (FR154N) NB120 4 Battery Cable Red BCSR Battery Cable Black BCS 5 Height Adjust Crank Assembly H7ASY Height Adjust Crank H7N Plastic Bushing T2PB Cotter Pin (T218C) NB580 Knob H7K 5/16 Pal Washer NB117 Threaded Link to the Deck (Not (674S) 10038 included in Hgt Adj Assembly) 6 Left Belt Guard 6155LN Acorn Nut (FR154N) NB120 7 Gas Tank 6102T Gas C
ملخص المحتوى في الصفحة رقم 19
Item # Description Part # 11 Tongue 661 Tongue Hinge 661A Tongue Extension 662 Hitch Swivel H10 12 Safety Hitch Pin H11 13 Red Safety Rope H9B 14 Blade Engage Tether (Black) BT44 15 Blade Engage Lever T60 BEA60 Engage Bushing (681S) 6713 Bolt/Nut (681B) NB155/NB281 Lever 681N Lever Knob B19 BLACK Rod Spring B25RT 16 Belt 66LR Belt after Ser. 97-231001 66LR2 17 Key Switch KS12 18 Blade Driver Center B99CCS (for list see fig. 1A or 1B) 19 Throttle 686 Throttle after Ser. 97-231001 686N 20 Idler Br
ملخص المحتوى في الصفحة رقم 20
Items Not Shown Item # Description Part # 30 Wiring Harness WHN60B (Briggs) Wiring Harness WHN60T (Tecumseh) Toggle Switch 685 31 Starter Relay SOL NEW Starter Relay Ser. 97-98 9043 32 Battery (12V) type 14A-A1 33 Oil Drain Valve AS122 Oil Drain Hose AS161 34 Engine Pulley 688 35 Engine Pulley Spacer Long 689L Engine Pulley Spacer Short 689S 36 Key Stock 688K 37 Engine Pulley Washer 699 38 Engine Pulley Bolt (6100) NB452 39 Bearing, Flanged 3/4 ID CB58 40 Bearing, Flanged 5/8" ID 1 3/8" OD F157
