Burley Nomad دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Burley Hitch
Alt Adapter


The Burley Hitch Alt Adapter enables use of the standard hitch on bicycle
frames whose dropouts prevent normal installation of the hitch. The Adapter
replaces your non-drive (left) side axle nut and allows the hitch to be installed
without interfering with the dropout.

Burley offers the Alt Adapter in several configurations; check with your
authorized Burley dealer to ensure that you choose the proper configuration
for your bicycle.

Warning! Burley h

ملخص المحتوى في الصفحة رقم 2

Solid Axle Adapter Installation Remove non-drive (left) side axle nut and retain. If your hub uses non-turn washers, these should remain on the axle. Check exposed axle length by placing Adapter against the dropout (or non-turn washer, if present). If the axle extends beyond the last band, add one or two of the provided washers until the axle does not extend beyond the last band.   Axle too long: add washer Thread on the Adapter and tighten to 30 N·m (22 ft·lb) using a