Cornelius Agitator Motor 569000207 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

IMI CORNELIUS INC  One Cornelius Place  Anoka, MN 55303-6234
Telephone (800) 238-3600 Facsimile (612) 422-3246
INSTALLING REPLACEMENT AGITATOR MOTOR
KITS (P/N 569000207 AND P/N 569000208)
ON
VANTAGE DISPENSERS
IMPORTANT: Only qualified Personnel should install this kit.
Unpack and inspect the kit. Make sure all kit items are present and in good condition.
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 314072000 Agitator Motor Ass’y, 115 VA

ملخص المحتوى في الصفحة رقم 2

3. Remove electrical control box cover. Remove mounting template from the refrigeration deck, then install new AGITATOR MOTOR ASSEMBLY (item 1) on the refrigeration deck (see Figure 3) and secure with two SCREWS (item 2). 4. Connect agitator motor assembly electrical wires to L and L terminals on the PC board inside the 1 2 electrical control box as shown in Figure 4. 5. Install cover on the electrical control box. MAKE SURE AGITATOR MOTOR WIRES ENTERING THE ELECTRICAL CONTROL BOX ARE NOT PINCHE