ملخص المحتوى في الصفحة رقم 1
Ambient Weather WS-0202 Advanced Weather Station
User Manual
Table of Contents
1. Introduction ..................................................................................................................................... 2
2. Getting Started ................................................................................................................................ 2
2.1 Parts List .............................................................................................
ملخص المحتوى في الصفحة رقم 2
1. Introduction Thank you for your purchase of the Ambient Weather WS-0202 Wireless Rain Gauge with Indoor Temperature. The following user guide provides step by step instructions for installation, operation and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit: http://ambientweather.wikispaces.com/ws0202 2. Getting Started Note: The power up sequence must be performed in the order shown in this section (remote rain gauge transmitter
ملخص المحتوى في الصفحة رقم 3
Figure 1 Figure 2 Figure 3 2.4 Display Console Set Up Note: To avoid permanent damage, please take note of the battery polarity before inserting the batteries. Move the rain gauge at least 10’ away from the display console (if the sensor is too close, it may not be received by the display console). Remove the battery door on the back of the display. Insert two AA (alkaline or lithium, avoid rechargeable) batteries in the back of the display console. The display will light u
ملخص المحتوى في الصفحة رقم 4
3. Remote Sensor Installation It is recommended you mount the rain gauge sensor on a flat, well drained surface, where there is no vibration. Use 2 screws (not included) to affix the rain gauge to a flat surface. 4. Console Operation Note: The console has two keys for easy operation: SET key, RAIN key. Any program mode can be exited by waiting for the 30-second time-out to take effect. 4.1 Set (Program) Mode While in Normal Mode, press and hold the SET key for at least three second
ملخص المحتوى في الصفحة رقم 5
Hours from Time Zone Cities GMT WET: Western European 1 CET: Central European Paris, France 2 EET: Eastern European Athens, Greece 3 BT: Baghdad Moscow, Russia 4 --- Abu Dhabi, UAE 5 --- Tashkent 6 --- Astana 7 --- Bangkok 8 CCT: China Coast Bejing 9 JST: Japan Standard Tokyo 10 GST: Guam Standard Sydney 11 --- Magadan 12 IDLE: International Date Line East Wellington, New Zealand NZST: New Zealand Standard 4.2 Rain Mode 4.2.1 Displaying Rainfall While in normal mode, press
ملخص المحتوى في الصفحة رقم 6
6.2 Measurement Specifications The following table provides specifications for the measured parameters. Measurement Range Accuracy Resolution Indoor Temperature -15.8 to 140 °F ± 2 °F 0.1 °F Rain 0 to 394 in. ± 10% 0.01 in 6.3 Power Consumption Base station : 2 x AA 1.5V Alkaline batteries Rain gauge : 2 x AAA 1.5V Alkaline batteries Battery life: Minimum 12 months for base station Minimum 24 months for rain gauge sensor (use lithium batteries in cold weather climates) 7.
ملخص المحتوى في الصفحة رقم 7
Problem Solution sources of heat or cold. Display console contrast is weak Replace console batteries with a fresh set of batteries. 8. Accessories The following software and hardware accessories are available for this weather station at www.AmbientWeather.com . Accessory Image Description Energizer AAA Lithium AAA lithium batteries for cold weather Battery (2-pack) - Batteries climates. for Long Life and Cold Weather Ambient Weather RG100 Made with UV inhibited ABS plastic, Rai
ملخص المحتوى في الصفحة رقم 8
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. Statement according to FCC part 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
