ملخص المحتوى في الصفحة رقم 1
WinCOMM V.92_LX
Internal 56Kbps Fax Data modem with Caller ID
Quick Start Guide
Version 1.0
FEATURES/SPECIFICATIONS
• V.90, V.92, ITU-T, V.34, V.32 bis, V.32, V.22 bis V.22 and Bell
212A, ITU-T, V.23, V.21 and Bell 103
• Transmission speed – receiving rate up to 56Kbps (downstream), and
transmit rate up to 33.6 Kbps.
• Data Compression – ITU-T V.44, V.42 bis and MNP5
• Fax specs – ITU-T V.17, V.29, V.27 ter, V.21 channel 2
EIA/TIA 578 FAX Class 1, or T.31 Fax Class 1.0 commands
ملخص المحتوى في الصفحة رقم 2
SYSTEM REQUIREMENTS: • x86 compatible PC with a PCI bus expansion slot • CD-ROM drive, Quad speed or faster • Hard Drive with at least 100MB free space • Microsoft Windows® XP, Windows® Vista • Sound card required for Voice and Answering functions CHECK LIST: • Internal PCI Modem • RJ11 Phone Cord • Software & Document CD-ROM • Quick Start Guide (Printed) 2
ملخص المحتوى في الصفحة رقم 3
Hardware Installation: 1. Make sure the power to your PC is turned OFF. 2. Remove the computer’s cover. 3. Select a PCI bus expansion slot for the new adapter. Remove the slot cover 4. Insert the modem into place carefully. Secure the adapter and retaining bracket. 5. Replace the computer’s cover. HARDWARE DESCRIPTION: 3
ملخص المحتوى في الصفحة رقم 4
Software Installation: This guide is intended to help you get started quickly with driver installation in Microsoft Windows. Important Notice: Add second modem or change the modem to an existing PC system, you may proceed a few steps before install the new hardware and software (modem’s driver). The followings are some of the considers: 1. To change a new modem, please remove the existing modem driver, or disable it from Windows® system before you remove the existing hardware. 2. To
ملخص المحتوى في الصفحة رقم 5
After your XP’s desktop loads-up completely, the new hardware wizard will be prompt for your modem. If your windows system has trouble to detect it, or your desktop problem to starts-up after modem added physically, please re-start your windows system again, and make sure the motherboard utility has been setup properly. Insert the manufacturer’s software CD into your CD-ROM and follow the steps to install the modem driver. 1. For WinXP, once you have completed the hardware installation,
ملخص المحتوى في الصفحة رقم 6
speakerphone, however, it does not have a microphone or speakerphone socket to operate in speakerphone mode. Installation – 1) Insert CD, Click on Software FaxTalk SE to install software or can use explore CD and go into FaxTalk SE folder , D:\FaxTalk SE, double click on Setup to install. 2) Choose setup language then click ok. 3) At the install shield wizard click next 4) Accept License agreement, click next 5) Type in user name and organization, click next 6) Destination folder, c
ملخص المحتوى في الصفحة رقم 7
To enable caller id - Open FaxTalk Communicator and select configure> program> modem> Advanced >Distinctive Ring/Caller ID setting Check the box, “Use FaxTalk for Distinctive Ring/ Caller ID service Check the box, “Enable Caller ID detection on incoming calls” Make sure the Caller ID initialization string is set to +vcid=1 Modem Dialing Location If you want to change your dialing location, please follow the instruction as below: Can open FaxTalk Communicator Click on Configure>
ملخص المحتوى في الصفحة رقم 8
For More information on FaxTalk please check your CD FaxTalk User Guide. Limited Warranty. Manufacturer warrants that the products sold hereunder are free from defects in material and workmanship for a period of two (2) years from manufacturing date. This limited warranty applies only to the original purchaser of Jaton Product and is not transferable. This limited warranty does not apply if failure to the Product Registration, or over thirty (30) days from purchase (original invoice date
ملخص المحتوى في الصفحة رقم 9
against defects in products or components not manufactured or installed by Manufacturer, or against damages result from non-manufacturer made products or components. This warranty does not apply if the Product has been damaged by accident, abuse, nor misuse. This warranty also does not apply to products upon which repairs have been affected or attempted by persons other than pursuant to written authorization by Manufacturer. Exclusive Obligation. This warranty is exclusive. The sole and
ملخص المحتوى في الصفحة رقم 10
purchase date of Jaton original invoice. Reseller/ Vendor: This warranty applies only for a period of two (2) years from manufacturing date. Registered User: This warranty applies only for a period of two (2) years from purchase date AND customer must register within 30 days of purchase date from legal reseller. Others: If the products do not conform to this Limited Warranty (as herein above described), Manufacturer should charge services such as repair, replacement whether based
ملخص المحتوى في الصفحة رقم 11
(2) All returned checks will be charged a $20.00 fee by Manufacturer. (3) All repair and replacement services allow 4-6 weeks from the date of receiving by Manufacturer. (4) All products without warranties require service processing fee $20 (payment in advance), which is not refundable. Entire Obligation. This Limited Warranty states the entire obligation of Manufacturer with respect to the Products. If any part of this Limited Warranty is determined to be void or illegal, the rem
ملخص المحتوى في الصفحة رقم 12
• read your manuals before installing peripherals and/or before making changes to the machine’s configuration; • ask your dealer if there are any known problems with the system requirements or installation procedures for any add-on products that your are purchasing; • buy industry standard products where compatibility issue are more likely to surface; • If you are unsure about installation for a new product, contact your dealer’s service department. We believe it is important for you
ملخص المحتوى في الصفحة رقم 13
Warranty Service Use Only Serial Number - ten or eleven digit code, the serial number consists of the following parts: Packaging Type Manufactured Date Code Production Numerical Code A 00 8 000015 Year Month XXXXX-XXX-XX S/N: A008000015 xxxx/xxxx 00.0 XXXX XX XXXXXX Product Label and Manufactured Date Code 13
ملخص المحتوى في الصفحة رقم 14
FCC Shielded Cable Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation, “SHIELD INTERFERENCE CABLE (S) MUST BE USED ACCORDING TO FCC 15.27©.” CAUTION: Changes or modifications no
