NETGEAR WPN802 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

e. Turn on your computer, and connect the power adapter to the WPN802. Then
Deploy the WPN802
check the lights on the front:

1. Disconnect the WPN802 from the computer and place it
• Power: The power light should be lit. If the power light is not lit,
NETGEAR WPN802 RangeMax™ Wireless Access Point
where you will deploy it.
check the connections and check to see if the power outlet is controlled by a
The best location is elevated, such as wall mounted or on
wall switch that is turned off.

ملخص المحتوى في الصفحة رقم 2

default Subnet Mask is 255.255.255.0. The WPN802 default setting is for a static IP Troubleshooting Tips Technical Support address. If the network where you are connecting it is using DHCP, configure it accordingly. See the Reference Manual on the Resource CD for the Wireless Access Here are some tips for correcting simple problems you may have. Thank you for selecting NETGEAR products. Point for more details. To register your product, go to: http://www.NETGEAR.com/register No lights are lit