ملخص المحتوى في الصفحة رقم 1
OWNER'S
MANUAL
MODEL NO.
625.384400
Caution:
Read and Follow
All Safety Rules and
Operating Instructions
Before First Use of
This Product.
If you have questions when
installing and using your wa-
ter filter housing call this toll-
free number...
DELUXE
1-800-426-9345
(M - F, 7 am - 8 pm, CST)
MULTI-PURPOSE
WATER FILTER HOUSING
For repair or replacement
parts, call this toll-free num-
ber...
• Safety Guides
1-800-366-7278
• Installation
• Operation
See back cover for other
Sears service numbers.
ملخص المحتوى في الصفحة رقم 2
SAFETY GUIDES / SPECIFICATIONS • Please read this entire manual before cartridge will not purify water, or make it safe installing and using your deluxe to drink. DO NOT use on HOT water (100°F, max.). Do not use with water that is multi-purpose water filter housing. Be sure to follow all guides and steps carefully. Failure to microbiologically unsafe or of unknown follow them could cause personal injury or quality without adequate disinfection before property damage. or after the system. • Prot
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS Planning Installation ............................................. 3- 4 Typical Installation Drawings / Tools and Materials Needed .......... 4 Water Filter Housing Installation .................................. 5- 7 Filtering All House Water ...................................... 5 - 6 Using Compression Fittings .................................. 5 Using Soldered Copper ...................................... 5 Using Threaded Fittings ..................................... 6 F
ملخص المحتوى في الصفحة رقم 4
TYPICAL INSTALLATIONS / TOOLS AND MATERIALS NEEDED INSTALLATION ON COPPER PLUMBING USING COMPRESSION FITTINGS FILTERED WATER apply several wraps of Teflon tape nut brass ferrule optional shutoff valve compression adaptor INLET 3/4" NPT - MATERIALS AND TOOLS NEEDED - WATER I_ 2 compression adaptors, 3/4" NPT x comp. IN (compression end to fit existing copper pipe) I_ Teflon tape I_ tubing cutter I_ sandpaper or emery-cloth I_ 2 wrenches, either open end or adjustable jaw, size to fit compression
ملخص المحتوى في الصفحة رقم 5
INSTALLATION STEPS A. USING COMPRESSION FITTINGS, FIG. 1 1. Apply several wraps of Teflon tape to the threads ass ferrule brass ferrule / nut nut of both compression fittings. 2. CAREFULLY, turn the compression fittings into 8. With the inlet side of the water filter facing in- the water filter head inlet and outlet and tighten. Do coming water, spread the pipes apart and fit both not cross-thread and damage the threads. Do not pipe ends into the compression fittings. Move a fer- overtighten and
ملخص المحتوى في الصفحة رقم 6
INSTALLATION STEPS (cont.) 2. On the main water pipe where you will install the 8. Turn a sweat adaptor fitting into the other side of filter use a tubing cutter to remove a section of pipe the filter head and hand tighten only. Using a tape measure or ruler measure the distance "D" as shown about 12" long. Use sandpaper or emery-cloth to thoroughly clean and remove all burrs and rough below. Mark this same dimension on a length of cop- edges from both pipe ends. per pipe. Cut the length of pipe
ملخص المحتوى في الصفحة رقم 7
INSTALLATION STEPS (cont.) REFER TO PAGE 5. If optional kits are used, follow 4. Use the plumbing procedures on page 5 if using instructions included with them. compression fittings. Follow procedures on pages 5 and 6 for sweat copper and threaded pipe installa- 1. Close the cold water side shutoff valve. (Usually, tion. Be sure water flow is into the filter inlet side there already is a shutoff under the sink. If not, close and from the outlet side to the faucet. the main water shutoff valve ne
ملخص المحتوى في الصفحة رقم 8
FILTER CARTRIDGE / USEFUL LIFE / REPLACEMENT FILTER CARTRIDGE LIFE for lead or chemical contaminant removal it is more important to replace it frequently. Several variables determine how long a cartridge will last. These include: Note: Small amounts of hydrogen sulfide (noticeable as "rotten egg" odor) may be reduced by taste and 1. where the water filter is installed (filtering all odor filters for a short time, quickly exhausting the house water, or just to one faucet) carbon media. Consult yo
ملخص المحتوى في الصفحة رقم 9
FILTER CARTRIDGE / USEFUL LIFE / REPLACEMENT (cont.) FILTER CARTRIDGE REPLACEMENT CAUTION: Never remove the sump with water Observe markings on the cartridge or on the wrap- pressure in the filter. per. silicone grease or Vaseline. Be sure it is fully seated in the groove. 6. Hold the sump up to the filter head aligning the handle center hole in the cartridge with the protrusion on the i@ 5. Lightly lubricate the o-ring seal in the sump with /_ bottom of the head. head Note: If the sump will not
ملخص المحتوى في الصفحة رقم 10
FILTER CARTRIDGE / USEFUL LIFE / REPLACEMENT (cont.) The adjustable filter wrench provided is intended to help turn the valve to the "Off", "On" or "Bypass" positions and remove the sump for easy filter changes. Turning the valve - The "push/slide" button on the wrench will need to be pushed in and the slide moved up into the wrenching area to fit on the valve. Clockwise towards "Off" and "Bypass" / Counterclockwise towards "Off" and "On" Push / Slide button Removing the sump - The slide will ne
ملخص المحتوى في الصفحة رقم 11
REPAIR PARTS Kenmore Deluxe Multi-Purpose Water Filter Housing, Model No. 625.384400 KEY PART DESCRIPTION NO. NUMBER 1 7164944 Head Assembly 2 42-34345 O-ring, 3-7/8" I.D. x 4-1/8" O.D. 3 7156543 Sump 4 42-34334 Sump Removal Wrench 41, 7228798 Owners Manual 42-38478 Sediment Cartridge, 25 micron 42-38480 Sediment Cartridge, 5 micron ,t, 42-34370 Taste & Odor Cartridge, 95% chlorine reduction _'_: 42-34373 Premium Taste & Odor Cartridge, 98% chlorine reduction _'_: 42-34365 Taste & Odor / Chemica
ملخص المحتوى في الصفحة رقم 12
DELUXE OWNERS MULTI-PURPOSE MANUAL WATER FILTER HOUSING For the repair or replacement parts you need Call 7 am - 7 pm, 7 days a week MODEL NO. 1 - 800 - 366 - PART 625.384400 (1 - 800 - 366 - 7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1 - 800 - 4 - REPAIR The model number of (1 - 800 - 473 - 7247) your deluxe water filter housing is found on the rating decal, on the filter For the location of a sump. Sears Repair Service Center in your area Call 24 hours a da
