Ampeg Ba115 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

BA115
BASS AMPLIFIER
Owner’s Manual

ملخص المحتوى في الصفحة رقم 2

BA115 BASS AMPLIFIER TOP PANEL: ON 0dB -15dB 12 3 4 5 INPUT GAIN MASTER STYLE TREBLE ULTRA MID BASS CD INPUT HEADPHONES LINE OUT POWER 1 2 3 4 5 6 7 8 9 10 11 12 13 1. 0dB INPUT: Connect your “passive” 7. ULTRA MID: This control is used in bass guitar here using a shielded instru- conjunction with the style control to ment cable. This input is not padded and adjust the midrange level of the amplifier. is best suited for basses without active 8. BASS: This control is used in con- electronics or “

ملخص المحتوى في الصفحة رقم 3

BA115 BASS AMPLIFIER IMPORTANT SAFEGUARDS AND PRECAUTIONS: All Ampeg products are designed for continuous safe operation. Abiding by the fol- lowing rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the power cord. • Connect the amplifier ONLY to a properly grounded AC outlet of the prop- er voltage for your am

ملخص المحتوى في الصفحة رقم 4

BA115 BASS AMPLIFIER TECHNICAL SPECIFICATIONS: OUTPUT POWER RATING 100 Watts at 4 ohms MAX INPUT LEVELS 0dB Input: 1.75V RMS -15dB Input: 9.75V RMS CD Input: 5V RMS LINE OUT LEVEL 120mV RMS HEADPHONE OUT LEVEL 3.75V RMS GAIN 39dB STYLE 1 = -25dB @500Hz 2 = -12dB @500Hz 3 = flat 4 = +5dB @2kHz and above 5 = -6dB @50Hz and below TREBLE 40dB range @10kHz ULTRA MID 30dB range @500Hz BASS 36dB range @50Hz SPEAKER SPECS 15”, 150 w, 4 ohm, 2.5” voice coil dia., 56 oz. magnet; Piezo tweeter POWER REQU