ملخص المحتوى في الصفحة رقم 1
[ Quick Start Guide ]
ISCSI HOST BUS ADAPTER INSTALLATION
z
®
QLA 4050/4050C/4052C
QLE4060C/4062C
QUICK START GUIDE
ملخص المحتوى في الصفحة رقم 2
Purchasers of OEM products should consult with the OEM for support. Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods: Web http://support.qlogic.com E-mail support@qlogic.com The QLogic knowledge database contains troubleshooting information for the QLogic host bus adapters. Access the data base from the QLogic Support Web page, http://support.qlogi
ملخص المحتوى في الصفحة رقم 3
Quick Start Guide Installation Instructions ® This Quick Start Guide describes how to install and configure your new QLogic SANblade host bus adapter and SANsurfer iSCSI HBA Manager application in four simple steps: ❑ Step 1. Verify the package contents. ❑ Step 2. Install the host bus adapter hardware. ❑ Step 3. Install the host bus adapter driver. ❑ Step 4. Install the SANsurfer iSCSI HBA Manager application. Keep the host bus adapter in the antistatic bag until installation. The host bus adap
ملخص المحتوى في الصفحة رقم 4
❑ The correct connectors: ❑ QLA4050: LC duplex ❑ QLA4050C/4052C, QLE4060C/4062C: RJ45 Step 1. Verify the Package Contents The QLogic host bus adapter is shipped with the following items: ❑ QLogic SANblade host bus adapter ❑ Low-profile bracket (not available in all models) ❑ Quick Start Guide (this document) ® ❑ SANsurfer for SANblade iSCSI HBAs CD(s) Step 2. Install the Host Bus Adapter Hardware NOTE: When installing the QLogic host bus adapter and driver in a Solaris system that does not alrea
ملخص المحتوى في الصفحة رقم 5
Follow these steps to install the host bus adapter hardware: 1. Power off the computer, then disconnect the power cable. 2. Remove the computer cover and find an empty bus slot. 3. Pull out the slot cover (if any) by removing the screw or releasing the lever. 4. Grasp the host bus adapter by the top edge and seat it firmly into the slot. 5. Refasten the host bus adapter’s retaining bracket using the existing screw or lever. 6. Close the computer cover. 7. Plug in the power cable and turn on
ملخص المحتوى في الصفحة رقم 6
b. Locate and launch (double-click) the executable (.exe) file containing the driver. c. When prompted, type or browse to a location on your hard drive to store the driver files. Click OK. 3. Windows detects the newly installed device, then displays the Found New Hardware with Ethernet Controller message. Click Next. 4. In the Install Hardware Device Drivers dialog box, select Search for a suitable driver for my device (recommended). Click Next. 5. In the Locate Driver Files dialog box, select
ملخص المحتوى في الصفحة رقم 7
8. The Found New Hardware Wizard with Network Controller message displays. The Found New Hardware Wizard program is launched to begin installing the iSCSI driver for the QLogic iSCSI HBA. 9. Select Install from a list or specific location (Advanced). Click Next. 10. Select the Search for the best driver in these locations option. Type or browse the path to the directory where you stored the driver files (see Step 2). 11. In the Hardware Installation - Windows Logo dialog box, click Continue An
ملخص المحتوى في الصفحة رقم 8
7. On the Install from Disk screen, select the directory where you stored the driver files (see step 1), then click OK. 8. When the Update Driver Software Wizard/Select QLogic iSCSI Adapter window displays, click Next. 9. Click Close on the Update Driver Software Wizard window. Linux (Driver and RAMDisk Image) The following installation instructions are applicable to SLES 9 (or later) or Red Hat Enterprise Linux 4.0 (or later). For more information and driver installation instruc
ملخص المحتوى في الصفحة رقم 9
To unload the driver, perform the following steps: 1. Login to the Solaris system as root. 2. Type the following command: pkgrm QLA4xxx-0 3. Type the following command to reboot the system: reboot -- -r Step 4. Install the SANsurfer iSCSI HBA Manager Application To install the SANsurfer iSCSI HBA Manager application: 1. Insert the applicable SANsurfer for SANblade iSCSI HBAs CD into your CD-ROM drive (if the auto-run screen does not appear, open the start_here html page with your browser.) 2. S
ملخص المحتوى في الصفحة رقم 10
Troubleshooting and Technical Support The QLogic knowledge database contains troubleshooting information and documentation for the QLogic SANblade host bus adapters. The knowledge base is available to all users at http://support.qlogic.com. For technical support, visit our web site support.qlogic.com, email us at support@qlogic.com, or call at 952-932-4040. Warranty The QLogic SANblade host bus adapter comes with a standard three year QLogic warranty. Please check the QLogic Web site at http:/
ملخص المحتوى في الصفحة رقم 11
Immunity Standards IEC61000-4-2 : ESD IEC61000-4-3 : RF Electro Magnetic Field IEC61000-4-4 : Fast Transient/Burst IEC61000-4-5 : Fast Surge Common/ Differential IEC61000-4-6 : RF Conducted Susceptibility IEC61000-4-8 : Power Frequency Magnetic Filed IEC61000-4-11 : Voltage Dips and Interrupt IEC61000-3-2 : Harmonic Current Emission IEC61000-3-3 : Voltage Fluctuation and Flicker VCCI compliance: Class B AS/NZS CISPR22 compliance: Class B CNS 13438 compliance: Class B MIC compliance: Class B ❑
ملخص المحتوى في الصفحة رقم 12
12
ملخص المحتوى في الصفحة رقم 13
13
ملخص المحتوى في الصفحة رقم 14
14
ملخص المحتوى في الصفحة رقم 15
© 2005–2009 QLogic Corporation. QLogic , the QLogic logo, SANsurfer, and SANsurfer Mangement Suite are trademarks or registered trademarks of QLogic Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves t
ملخص المحتوى في الصفحة رقم 16
*IS0054501-00 D* QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 www.qlogic.com IS0054501-00 D
