ملخص المحتوى في الصفحة رقم 1
10M Ethernet Attached Port
PC Card Adapter
Quick Installation Guide
M73-APO01-260
ملخص المحتوى في الصفحة رقم 2
FCC Regulatory Statements Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable prot
ملخص المحتوى في الصفحة رقم 3
INTRODUCTION The PCMCIA Ethernet card is a credit-card-size Type II PCMCIA Ethernet adapter that complies with the PCMCIA 2.1 and IEEE 802.3 standards. It works with computers that incorporate a compatible interface. The drivers associated with this card allow you to use the most popular Network Operating System (NOS) in the PC environment very easily. The attached port integrating the connector in the card, eliminates the need for dongles or external connectors. You can then plug st
ملخص المحتوى في الصفحة رقم 4
Operating Environment • Novell Netware 3.x, 4.x • Microsoft LAN Manager • Packet Driver Applications • Microsoft Windows for Workgroups 3.11, Windows 3.1 • Microsoft Windows NT 3.51, NT 4.0 • Windows 95 • Windows 98 • Windows ME • Windows 2000 • Windows XP • Lantastic 6.0 • IBM OS/2 Warp Version 3 - 2 -
ملخص المحتوى في الصفحة رقم 5
INSTALLATION Hardware Connections & LEDs Indicators Insert the PCMCIA Ethernet card into the PCMCIA slot of your notebook RJ-45 Port: Connect one end of the Ethernet cable into the card’s RJ-45 port. Plug the other end of the cable into a switch hub. Link LED indicator: lights green when 10M Network is linked ACT LED indicator: blinks green when transmitting/receiving data Power LED indicator: lights yellow when receiving power Software Installation Insert the driver diske
ملخص المحتوى في الصفحة رقم 6
Windows 95 Installation Make sure that the drivers of PCMCIA slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart from above mentioned, any questions on this layer need to be taken up with the computer's manufacturer. 1. Insert PCMCIA Ethernet Card into PCMCIA slot. In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer”. 2. Please input the path, A:\ and insert driver diskette. The driver will be
ملخص المحتوى في الصفحة رقم 7
on its functionality. Apart from which is mentioned above, any questions on this layer need to be taken up with the computer's manufacturer. 1. Once the PC Card is connected to your computer, Windows will automatically detect the new device. Windows will prompt an ADD NEW HARDWARE WIZARD dialog box, then press Next. 2. Select Search for the best… and press Next. 3. Select Floppy disk drives and insert driver diskette. Then press Next, the driver will be installed. 4. Click Next
ملخص المحتوى في الصفحة رقم 8
5. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. 6. Reboot the machine and the card will take effect. Windows ME Installation 1. Once the PC Card is connected to your computer, Windows will automatically detect the new device. Insert the device Driver Disk into the floppy disk drive of your system. Select Automatic search for a better driver (Recommended) and click Next. 2 Windows will copy the appro
ملخص المحتوى في الصفحة رقم 9
Windows NT 4.0 1. Make sure that the Network Services already installed in the NT 4.0 system. 2. Insert the Ethernet Adapter into one of the system's PCMCIA Slots 3. Power up Windows NT 4.0 4. Open My Computer 5. Open Control Panel 6. Run the Network 7. Select Adapters page 8. Press Add to add network adapter 9. Press Have Disk button 10. Insert the driver disk into drive A: 11. Specify the path to ” A:\ and press OK 12. A dialog box will appear to adjust the driver's settings. T
ملخص المحتوى في الصفحة رقم 10
Windows 2000 Installation 1. Connect one end of the cable for the PCMCIA Ethernet card to your computer and the other end to the port of the new hardware device. Windows will appear the following picture. Click Next. 2. Select Search for a suitable driver for my device (recommended). Click Next. 3. Select Floppy disk drives and insert the disk associated with the PCMCIA Ethernet card in the disk drive. Click Next. - 8 -
ملخص المحتوى في الصفحة رقم 11
4. Click Next to make Windows install the appropriate driver for the new device. 5. Click Yes to continue. - 9 -
ملخص المحتوى في الصفحة رقم 12
6. Click Finish to complete the software installation. Windows XP Installation 1 Once the device is connected, Windows will automatically detect the new device. Insert the device Driver Disk into the floppy disk drive of your system. Click Install the software automatically (Recommended) and click Next. 2. Click Continue Anyway to proceed. - 10 -
ملخص المحتوى في الصفحة رقم 13
3. Wait while Windows copies the appropriate driver to your system. 4 Click Finish to complete the software installation. - 11 -
