ملخص المحتوى في الصفحة رقم 1
NANO 150N
WIRELESS
USB ADAPTER
USER MANUAL
MODEL 525336
INT-525336-UM-0212-01
ملخص المحتوى في الصفحة رقم 2
CONTENTS 1 Introduction .............................................................................................................. 1 1.1 Features....................................................................................................................................1 1.2 Specifications............................................................................................................................1 2 Installation Procedure ..........................................
ملخص المحتوى في الصفحة رقم 3
1 Introduction Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Nano 150N Wireless USB Adapter, Model 525336. By following the simple steps in this user manual, you will soon be able to enjoy the helpful features listed below. 1.1 Features • Connects your netbook, laptop or desktop PC to a wireless network • Fits discretely into your netbook or laptop USB port • Ideal for streaming HD-quality video, online gaming, downloading large files and making VoIP calls • Low-pro
ملخص المحتوى في الصفحة رقم 4
System Requirements • Notebook or Desktop PC with Pentium 300 MHz-compatible processor or higher • Windows XP, Vista and Windows 7 • Available Hi-Speed USB 2.0 port Package Contents • Nano 150N Wireless USB Adapter • Quick install guide • Setup CD with user manual 2
ملخص المحتوى في الصفحة رقم 5
2 Installation Procedure Before you proceed with the installation, note the following. Note1: The following installation was operated under Windows XP. (Procedures are similar for Windows 2000/Vista/7.) Note2: If you have installed the Wireless PC Adapter driver and utility before, uninstall the old version first. I. Install the Driver and Utility A. Insert the installation CD in your CD-ROM drive. Execute the “Setup.exe” program. B. Select a setup language and click “OK” to pr
ملخص المحتوى في الصفحة رقم 6
D. When you see the following screen, click “Install” to begin the installation. E. The system starts to install the driver and utility. F. Click “Finish” to complete the driver and utility installation. 4
ملخص المحتوى في الصفحة رقم 7
II. Connect to a Wireless Access Point A. To start configuring the adapter, double-click the icon in the system tray or right-click the icon and select “Open configuration utility.” B. The utility of the adapter is displayed. Click the “Available Network” tab and double-click on the wireless access point you want to connect to. C. Input the security setting and click “OK” to start the network connection. 5
ملخص المحتوى في الصفحة رقم 8
* Use Windows Zero Configuration on Windows Vista / 7: A. With Windows Vista / 7, you can use Windows Zero Configuration to connect to a wireless access point. Click “Start,” then click “Control Panel.” Click “Network and Internet” in the Control Panel. B. Click “Connect to a network” under “Network and Sharing Center.” 6
ملخص المحتوى في الصفحة رقم 9
C. Click the access point you want to use if it’s shown, then click “Connect.” D. If it’s an unnamed access point (i.e., the SSID of this wireless access point is hidden), you’ll be prompted to input its name, and the name must be identical to the SSID setting of the wireless access point you’re connecting to. 7
ملخص المحتوى في الصفحة رقم 10
E. If the access point is protected by an encryption method, you need to input its security or passphrase here. It must match the encryption setting on the access point. F. If you can see the screen below, the connection between your computer and wireless access point has been successfully established. Click “Close” to start the network connection. 8
ملخص المحتوى في الصفحة رقم 11
3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the adapter and monitor the link status and statistics during the communication process. The Configuration Utility appears as an icon on the system tray and desktop of Windows. You can open it by double-clicking the icon. Right-click the icon in the system tray. There are some options for operating the configuration utility. Open Config Utility Select “Open Config Utilit
ملخص المحتوى في الصفحة رقم 12
Parameter Description Refresh – Refresh the adapter list in the “B“ block. A Mode – There are two modes: Station and Access Point. If “Station“ is selected, the adapter works as a wireless adapter. If “Access Point“ is selected, the adapter will works as a wireless AP. View – Enable “Status Bar“ and the “D“ block in the utility will display the current status of the utility. About – To check the version of the utility, select this item. This is a list for you to configure sev
ملخص المحتوى في الصفحة رقم 13
Parameter Description Available Network(s) This list shows all information of the available wireless networks within the range of your adapter (SSID, Channel, Encryption, Network Authentication, Signal etc.). To connect to any network on the list, double-click the selected network. Refresh Click “Refresh“ to update the available networks list. It is recommended that you refresh the list any time you have changed the connection network. Add to Profile A profile stores the settings of
ملخص المحتوى في الصفحة رقم 14
Encryption This displays the encryption setting of the current connection: None, WEP, TKIP or AES. SSID The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID prevents the unintentional merging of two co-located WLANs. Signal Strength This indicates the wireless signal strength. Link Quality This indicates the wireless link quality. Network Address This shows the MAC, IP address and other information about the adapter. 3.4 Profile The “P
ملخص المحتوى في الصفحة رقم 15
3.4.1 Configure the Profile Parameter Description Profile Name Define a recognizable profile name so you can identify different networks. Network Name (SSID) The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID prevents the unintentional merging of two co-located WLANs. You may specify an SSID for the adapter and then only the device with the same SSID can interconnect with the adapter. This is a computer-to-computer There are two
ملخص المحتوى في الصفحة رقم 16
business users who do not have access to network authentication servers. In this mode, known as Pre-Shared Key, the user manually enters the starting password in their access point or gateway, as well as in each wireless station in the network. WPA-PSK takes over automatically from that point, keeping unauthorized users that don’t have the matching password from joining the network, while encrypting the data traveling between authorized devices. WPA2-PSK – WPA2-PSK is also for home a
ملخص المحتوى في الصفحة رقم 17
ASCII The WEP key can be in ASCII format (alphanumeric values or signs are allowed) so it’s more recognizable for users. PASSPHRASE This is a text string with a maximum of 32 alphanumeric characters; for example, “Test.” The WEP key is based on the passphrase determined by you. This passphrase may not work with other vendors’ products due to possible incompatibility with other vendors’ passphrase generators, so you must use the same passphrase or WEP key settings for all wireless comput
ملخص المحتوى في الصفحة رقم 18
Password User’s password in the RADIUS server. Certificate Select the certificate for RADIUS server authentication. 3.5 Status This screen shows information about the manufacturer, driver version, settings of the wireless network the adapter is connecting to, linking time and link status. If you’re unsure about the status of the adapter and the network you are connecting, go to the screen for more details. 3.6 Statistics You can get real-time information about the packet transm
ملخص المحتوى في الصفحة رقم 19
3.7 Wi-Fi Protect Setup (WPS) Wi-Fi Protected Setup (WPS) is the latest wireless network technology, which makes wireless network setup become very simple. If you have a WPS-enabled wireless access point and you want to establish a secure connection to it, you don’t need to configure the wireless access point and set up data encryption by yourself. All you need to do is to go to the WPS setup page of this wireless card, click the PBC or PIN button, and then press a WPS button or enter a
ملخص المحتوى في الصفحة رقم 20
3. If you click “Yes” and the following message appears on your computer, select the SSID of the wireless access point that you want to connect to and click “Select.” 4. You’ll need to wait up to two minutes while the install procedure runs. If a wireless access point with the correct PIN code is found, you’ll be connected to that access point. 18
