ملخص المحتوى في الصفحة رقم 1
UDS2100
User Guide
Part Number 900-448
Revision A September 2006
ملخص المحتوى في الصفحة رقم 2
Copyright & Trademark © 2006, Lantronix. All rights reserved. No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of Lantronix. Printed in the United States of America. Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of The Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications Corporation
ملخص المحتوى في الصفحة رقم 3
Contents 1: Using This Guide 7 Purpose and Audience _______________________________________________ 7 Chapter Summary ___________________________________________________ 7 Additional Documentation _____________________________________________ 8 2: Introduction 9 Applications ________________________________________________________ 9 Application Examples ________________________________________________ 9 Protocol Support ___________________________________________________ 11 Additional
ملخص المحتوى في الصفحة رقم 4
Serial Port Connection ___________________________________________ 36 Exiting Setup Mode _________________________________________________ 37 6: Setup Mode: Server Configuration 38 Server Configuration (Option 0)________________________________________ 38 IP Address________________________________________________________ 38 Set Gateway IP Address _____________________________________________ 38 Netmask: Number of Bits for Host Part __________________________________ 39 Change Telnet Confi
ملخص المحتوى في الصفحة رقم 5
Disable TFTP Firmware Update ____________________________________ 58 Disable Port 77FE (Hex) __________________________________________ 58 Disable Web Server _____________________________________________ 58 Disable Web Setup ______________________________________________ 58 Disable ECHO Ports _____________________________________________ 58 Enable Enhanced Password_______________________________________ 58 Default Settings (Option 7) ___________________________________________ 59 Channel
ملخص المحتوى في الصفحة رقم 6
D: Compliance and Disclaimer 81 Index 83 Figures Figure 2-1. Serial Tunneling Example _____________________________________ 10 Figure 2-2. Direct TCP/IP or Redirector Configuration ________________________ 10 Figure 2-3. Sample Hardware Address ____________________________________ 12 Figure 3-1. UDS2100 Connected to Serial Device and Network _________________ 14 Figure 4-1. Lantronix Web Manager ______________________________________ 22 Figure 4-2. Network Settings ____________________
ملخص المحتوى في الصفحة رقم 7
1: Using This Guide 1: Using This Guide Purpose and Audience This guide provides the information needed to configure, use, and update the UDS2100 device server. It is for system administrators and those responsible for installing and maintaining the UDS. Chapter Summary Table 1-1. Chapter Summary The remaining chapters in this guide Chapter Description 2: Introduction Describes the main features of the UDS and the protocols it supports. 3: Getting Started Provides information for
ملخص المحتوى في الصفحة رقم 8
1: Using This Guide Chapter Description 13: Technical Specifications Lists technical specifications for the UDS. A: Alternative Ways to Assign Provides detailed information about using DHCP, AutoIP, an IP Address BOOTP ARP, and Telnet to assign an IP address. B: Binary to Hexadecimal Provides instructions for converting binary values to Conversions hexadecimal. Additional Documentation The following information is available on the product CD or the Lantronix Web site (www.lantronix.com
ملخص المحتوى في الصفحة رقم 9
2: Introduction 2: Introduction The UDS2100 is a 2-port device server that provides a quick, simple, and cost- effective way to bring the advantages of data accessibility and remote management to devices not currently connected to a network. Applications The UDS family of Device Servers allows serial devices, such as those listed below, to connect and communicate over Ethernet networks using the IP protocol family (TCP for connection-oriented stream applications and UDP for datagram a
ملخص المحتوى في الصفحة رقم 10
2: Introduction Figure 2-1. Serial Tunneling Example The Com Port Redirector software included on the product CD simplifies the integration process by extending the functionality of COM-port-based Windows™ applications. Virtual COM ports, mapped to remote device servers on the network, can replace direct serial connections. Figure 2-2. Direct TCP/IP or Redirector Configuration Note: For step-by-step instructions on configuring the UDS for serial tunneling or for use with the Com
ملخص المحتوى في الصفحة رقم 11
2: Introduction Protocol Support The UDS uses the Internet Protocol (IP) for network communications and the Transmission Control Protocol (TCP) to assure that no data is lost or duplicated and that everything sent to the connection arrives correctly at the target. Supported protocols include: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for network communications. TCP, UDP, and Telnet for connections to the serial port. TFTP for firmware updates. IP for addressin
ملخص المحتوى في الصفحة رقم 12
2: Introduction Product Information Label The product information label on the underside of the unit contains the following information about your specific unit: Bar code Serial number Product ID (name) Product description Hardware address (also referred to as the Ethernet or MAC address) The first three bytes of the hardware address are fixed and read 00-20-4A, identifying the unit as a Lantronix product. The fourth, fifth, and sixth bytes are unique numbers assigned to each u
ملخص المحتوى في الصفحة رقم 13
3: Getting Started 3: Getting Started This chapter describes how to get your UDS up and running in the shortest possible time. Package Contents Verify and inspect the contents of the UDS2100 package using the following list. If any item is missing or damaged, contact your place of purchase immediately. UDS2100 DB9F to DB9F Null Modem Cable (P/N 500-164) Power supply CD with UDS2100 User Guide and utilities (DeviceInstaller and Com Port Redirector) Quick Start Guide UDS2100
ملخص المحتوى في الصفحة رقم 14
3: Getting Started Installing the UDS Figure 3-1. UDS2100 Connected to Serial Device and Network To install the unit: To install the unit, complete the following steps in order. Refer to the numbers in the previous figure. 1. Connect a serial device to your unit. See 2: Introduction for more information about what kinds of device attachments the unit supports. 2. Connect an Ethernet cable to the 10/100 port. 3. Supply power to your unit using the power supply that was included in the
ملخص المحتوى في الصفحة رقم 15
3: Getting Started Required Information Before configuring the UDS, have the following information available: Hardware Address Take note of the unit’s hardware address (also known as the Ethernet or MAC address). It is on the product label, in the format: 00-20-4a-XX-XX-XX, where the XXs are unique numbers assigned to the product Hardware Address: 00-20-4a-_____-_____-_____ IP Address The UDS must have a unique IP address on your network. This address references the specific uni
ملخص المحتوى في الصفحة رقم 16
3: Getting Started Assigning the IP Address: DeviceInstaller This chapter covers the steps for getting the UDS2100 device server online and for viewing its current configuration. Note: DeviceInstaller online Help provides more detailed information on using DeviceInstaller. Installing DeviceInstaller To use the DeviceInstaller utility, first install it from the product CD. 1. Insert the product CD into your CD-ROM drive. The Lantronix UDS2100 DeviceInstaller window displays. 2. If the C
ملخص المحتوى في الصفحة رقم 17
3: Getting Started 7. Select the device from the main window list and select Ping from the Tools menu. The Ping Device dialog box shows the IP address of the selected unit. 8. From the Tools menu, click the Ping button. The results display in the Status window. Click the Clear Status button to clear the window so you can ping the device again. Note: If you do not receive “Reply” messages, make sure the unit is attached to the network properly and the IP address assigned is valid for the
ملخص المحتوى في الصفحة رقم 18
3: Getting Started Table 3-1. Current Configuration Description Setting Name Configurable field. A name that identifies the UDS2100. Double-click the field, type in the value, and press Enter to complete. This name is not visible on other PCs or laptops using DeviceInstaller. Group Configurable field. A group name to categorize the UDS2100. Double-click the field, type in the value, and press Enter to complete. This group name is not visible on other PCs or laptops using DeviceInstall
ملخص المحتوى في الصفحة رقم 19
3: Getting Started Description Setting Gateway Displays the UDS2100’s current gateway. To change the gateway, see Assigning an IP Address on page 16. Number of Ports Displays 2, the number of ports on the UDS2100. TCP Keepalive Displays the UDS2100’s TCP keepalive value. The value is in the range 1-65s, and the default setting is 45. Supports Configurable Displays False. Pins Supports Email Triggers Displays False. Supports AES Data Displays False. Stream Supports 485 Displays True
ملخص المحتوى في الصفحة رقم 20
3: Getting Started 3. Continue with step 4 in 5: Configuration via Telnet or Serial Port (Setup Mode). Assigning the IP Address: Serial Port Login To assign the IP address and other network settings using a serial connection: 1. Connect a console terminal or a PC running a terminal emulation program to the unit's serial port. The default serial port settings are 9600 baud, 8 bits, no parity, 1 stop bit, no flow control. 2. To enter Setup Mode, cycle the unit's power (power off and back on
