National Instruments 5411 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TM
DAQArb 5411
User Manual
High-Speed Arbitrary Waveform Generator
DAQArb 5411 User Manual
June 1997 Edition
Part Number 321558A-01
© Copyright 1997 National Instruments Corporation. All Rights Reserved.

ملخص المحتوى في الصفحة رقم 2

Internet Support support@natinst.com E-mail: info@natinst.com FTP Site: ftp.natinst.com Web Address: http://www.natinst.com Bulletin Board Support BBS United States: (512) 794-5422 BBS United Kingdom: 01635 551422 BBS France: 01 48 65 15 59 Fax-on-Demand Support (512) 418-1111 Telephone Support (U.S.) Tel: (512) 795-8248 Fax: (512) 794-5678 International Offices Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Canada (Ontario) 905 785 0085, Canada (Québec) 514 694 8521, De

ملخص المحتوى في الصفحة رقم 3

Important Information Warranty The DAQArb 5411 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor. The media on which you receive National Instruments software are warranted not to fail to execute programming instruct

ملخص المحتوى في الصفحة رقم 4

Table of Contents About This Manual Organization of This Manual........................................................................................ix Conventions Used in This Manual................................................................................x Customer Communication ............................................................................................x Chapter 1 Introduction About Your DAQArb 5411 ......................................................................

ملخص المحتوى في الصفحة رقم 5

Table of Contents Chapter 4 Arb Operation Waveform Generation .................................................................................................. 4-2 Update Rate .................................................................................................................. 4-3 Arb Mode...................................................................................................................... 4-3 Waveform Size and Resolution.............................................

ملخص المحتوى في الصفحة رقم 6

Table of Contents Appendix A Specifications Appendix B Waveform Sampling and Interpolation Appendix C Customer Communication Glossary Index Figures Figure 1-1. The Relationship between the Programming Environment, NI-DAQ, and Your Hardware ...............................................................1-4 Figure 3-1. DAQArb 5411 I/O Connector................................................................3-1 Figure 3-2. Output Levels and Load Termination Using a 50 Ω Output Impedance ...........

ملخص المحتوى في الصفحة رقم 7

Table of Contents Figure 4-15. Burst Trigger Mode for DDS Mode ...................................................... 4-16 Figure 4-16. Markers as Trigger Outputs................................................................... 4-17 Figure 4-17. Analog Output and SYNC Out Block Diagram .................................... 4-18 Figure 4-18. Waveform, Trigger, and Marker Timings ............................................. 4-19 Figure 4-19. Output Attenuation Chain .............................

ملخص المحتوى في الصفحة رقم 8

About This Manual The DAQArb 5411 User Manual describes the features, functions, and operation of the DAQArb 5411. The DAQArb 5411 is a high-speed arbitrary waveform generating device with performance comparable to standalone instruments. Organization of This Manual The DAQArb 5411 User Manual is organized as follows: • Chapter 1, Introduction, describes the DAQArb 5411, lists the optional software and optional equipment, and explains how to unpack your DAQArb 5411. • Chapter 2, Installatio

ملخص المحتوى في الصفحة رقم 9

About This Manual Conventions Used in This Manual The following conventions are used in this manual: < > Angle brackets enclose the name of a key on the keyboard (for example, ). Angle brackets containing numbers separated by an ellipsis represent a range of values associated with a bit or signal name (for example, DBIO<3..0>). arb Arb is a generic term that denotes one or more of the PCI-5411 and AT-5411 arbitrary waveform generating devices. bold Bold text denotes the names of menu

ملخص المحتوى في الصفحة رقم 10

Chapter 1 Introduction This chapter describes the DAQArb 5411, lists the optional software and optional equipment, and explains how to unpack your DAQArb 5411. About Your DAQArb 5411 Thank you for buying a National Instruments DAQArb 5411 device. The DAQArb 5411 family consists of two different devices for your choice of bus: the PCI-5411 for the PCI bus and the AT-5411 for the ISA bus. Your 5411 device has the following features: • One 12-bit resolution analog output channel • Up to 16 MHz

ملخص المحتوى في الصفحة رقم 11

Chapter 1 Introduction RTSI bus triggers on devices that use the RTSI bus or the digital trigger on the I/O connector. Detailed specifications of the DAQArb 5411 devices are in Appendix A, Specifications. What You Need to Get Started To set up and use your DAQArb 5411, you will need the following: ❑ One of the following DAQArb 5411 devices: – PCI-5411 – AT-5411 ❑ DAQArb 5411 User Manual ❑ NI-DAQ for PC compatibles, version 5.0 or later ❑ One of the following software packages and documentation

ملخص المحتوى في الصفحة رقم 12

Chapter 1 Introduction Software Programming Choices There are several options to choose from when programming your National Instruments DAQ hardware. You can use LabVIEW, LabWindows/CVI, or VirtualBench. National Instruments Application Software LabVIEW and LabWindows/CVI are innovative program development software packages for data acquisition and control applications. LabVIEW uses graphical programming, whereas LabWindows/CVI enhances traditional programming languages. Both packages inclu

ملخص المحتوى في الصفحة رقم 13

Chapter 1 Introduction Your DAQArb 5411 kit contains a free copy of VirtualBench-Arb and VirtualBench-Function Generator. VirtualBench-Arb is a turn-key application you can use to generate waveforms as you would with a standard arbitrary waveform generator. NI-DAQ Driver Software The NI-DAQ driver software is included at no charge with all National Instruments DAQ hardware. NI-DAQ is not packaged with accessory products. NI-DAQ has an extensive library of functions that you can call from y

ملخص المحتوى في الصفحة رقم 14

Chapter 1 Introduction Optional Equipment National Instruments offers a variety of products to use with your DAQArb 5411, including probes, cables, and other accessories, as follows: • Shielded and unshielded I/O connector blocks (SCB-68, TBX-68, CB-68) •RTSI bus cables For more specific information about these products, refer to your National Instruments catalogue or web site, or call the office nearest you. Cabling The following list gives recommended part numbers for cables that you can

ملخص المحتوى في الصفحة رقم 15

Chapter 1 Introduction Unpacking Your device is shipped in an antistatic package to prevent electrostatic damage to the device. Electrostatic discharge can damage several components on the device. To avoid such damage in handling the device, take the following precautions: • Ground yourself via a grounding strap or by holding a grounded object. • Touch the anti-static package to a metal part of your computer chassis before removing the device from the package. • Remove the device from the p

ملخص المحتوى في الصفحة رقم 16

Chapter Installation and 2 Configuration This chapter describes how to install and configure your DAQArb 5411. Installation Note: You should install your driver software before installing your hardware. Refer to the DAQArb 5411 Read Me First document for software installation information. If you have an older version of NI-DAQ already in your system, that software will not work with your device. Install NI-DAQ from the NI-DAQ software CD shipped with your DAQArb 5411. You can install the PC

ملخص المحتوى في الصفحة رقم 17

Chapter 2 Installation and Configuration 8. Replace the cover. 9. Plug in and turn on your computer. The PCI-5411 or AT-5411 is now installed. Hardware Configuration The DAQArb 5411 is a fully software-configurable, Plug and Play device. Configuration information is stored in nonvolatile memory. The Plug and Play services query the device, read the information, and allocate resources for items such as base address, interrupt level, and DMA channel. After assigning these resources, the operat

ملخص المحتوى في الصفحة رقم 18

Chapter 3 Signal Connections This chapter describes the I/O connectors, signal connections, and digital interface to the DAQArb 5411. I/O Connector The DAQArb 5411 has four connectors: three SMB connectors and a 50-pin mini-SCSI type connector, as shown in Figure 3-1. ARB SYNC PLL Ref Dig Out Figure 3-1. DAQArb 5411 I/O Connector © National Instruments Corporation 3-1 DAQArb 5411 User Manual

ملخص المحتوى في الصفحة رقم 19

Chapter 3 Signal Connections ARB Connector The ARB connector provides the waveform output. The maximum output levels on this connector depend on the type of load termination. If the output of a DAQArb 5411 terminates into a 50 Ω load, the output levels are ±5 V, as shown in Figure 3-2. If the output of DAQArb 5411 terminates into a high impedance load (HiZ), the output levels are ±10 V. If the output terminates into any other load, the levels are: R L V = – x 10 V out R + R L O where V is t

ملخص المحتوى في الصفحة رقم 20

Chapter 3 Signal Connections SYNC Connector The SYNC connector is a transistor-transistor-logic (TTL) version of the sine waveform being generated at the output. You can think of the SYNC output as a very high frequency resolution, software-programmable clock source for many applications. You can also vary the duty cycle of SYNC output on the fly by software control, as shown in Figure 3-3. t is the time period of the sine wave being p generated and t is the pulse width of the SYNC output.