Omnitron Systems Technology iConverter CWDM/X دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

NOTE: The iConverter CWDM/X modules can not be installed in slots 4, 8, 12 and
16 of a 19-Module Chassis or in the top slot of a 2-Module Chassis or in a 1-Module
Redundant Power Chassis.
NOTE: The iConverter 8-Channel Double-Wide CWDM/X can only be installed
iConverter CWDM/X 4 and 8 Channel MUX/DEMUX
in a 2-Module Chassis or 19-Module Chassis with the exception of slots 4/5, 8/9,
USER MANUAL
12/13 and 16/17.
Design Considerations
Product Overview
iConverter CWDM/X modules are passive d

ملخص المحتوى في الصفحة رقم 2

Expansion Port on model 8862-2 can be used as a 1550nm pass band port. On models 8860-2 and 8860-3, the Expansion Port can also be used as a 1550nm Pass Band Port to transport legacy 1550nm single-mode traffic as long as the spectral width of the1550nm legacy network is between 1510 and 1570nm . 8860-2 8860-2 1310 PB 1310 PB 8861-0 8861-0 1470 1470 1490 1490 COMMON 1590 1590 1510 1510 1610 1610 1530 1530 1550 1550 COM EXP EXP COM 1570 1570 Figure 5: Two Cascaded 4-Channel MUX/DEMUX Both the