ملخص المحتوى في الصفحة رقم 1
Auto LANStreamer PCI Adapter
04H8095
Installation Guide
ملخص المحتوى في الصفحة رقم 2
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility
ملخص المحتوى في الصفحة رقم 3
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Requirements Workgroups • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04 (2/24/97). • Driver Name: IBMMPC.DOS Size:60KB Date: 4/4/96 • Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. • Netware client for DOS and MS-Windows. Device Configuration
ملخص المحتوى في الصفحة رقم 4
1 Connecting to a Netware 3.12 Server Windows for Workgroups C:\WINDOWS ❒ NO ❒ IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation. 9 When the install utility is finished, press to restart the machine. 10 After windows loads, open the “NETWORK” folder, and double-click the
ملخص المحتوى في الصفحة رقم 5
1 Connecting to Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name: Windows 95 Default • Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration Vectra VL8 Vectra VL7 Vectra VE7/VE8 Interrupt 11(10) 11(10) 10(11) I/O Address C800-h C800-h DC00-h Procedure 1 With the HP Vectra turned off ins
ملخص المحتوى في الصفحة رقم 6
1 Connecting to Netware 3.12 Server Windows 95 SR2 10 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN\LNSTRM\DISK2\”) 11 At the “Copying Files” window, click on “OK.” 12 Click “OK” to provide your Computer and Workgroup names. 13 Enter your Computer Name, Workgroup Name, Computer Description, and click on “Close.” 14 Accept the default properties, and click on “OK.” 15 When pr
ملخص المحتوى في الصفحة رقم 7
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Requirements Workgroups • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name: IBMMPC.DOS Size: 60KB Date: 4/4/97 • Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. • Netware client for DOS and MS-Windows. Device Configuration Vect
ملخص المحتوى في الصفحة رقم 8
2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NO ❒ IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation. 9 When the install utility is finished, press to restart the machine. 10 After windows loads, open the “NETWORK” folder, and double-click the “NETWORK SET
ملخص المحتوى في الصفحة رقم 9
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name: Windows 95 Default • Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration Vectra VE8 Vectra VL7 Vectra VE7/VE8 Interrupt 11 11(12) 11(10) I/O Address F800-h C800-h DC00-h Procedure 1 With the HP Vectra turned off in
ملخص المحتوى في الصفحة رقم 10
2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Insert disk 1of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\MASTERS\LANDRV\LNSTRM\DISK2\”) 11 At the “Copying Files” window, click on “OK.” 12 Click “OK” to provide your Computer and Workgroup names. 13 Enter your Computer Name, Workgroup Name, Computer Description, and click on “Close.” 14 Accept the default properties, and click on “OK.” 15 Whe
ملخص المحتوى في الصفحة رقم 11
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Requirements Workgroups • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name for Vectra VL8 and VL7: IBMMPC.DOS Size: 60KB Date: 4/ 4/97. • Driver Name for Vectra VE7/VE8: Streamer.386 Size:85KB Date: 09/13/ 96. • Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/
ملخص المحتوى في الصفحة رقم 12
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 7 Click on “Drivers” then on “Add Adapter.” 8 With “Unlisted or Updated Network Adapter”, click on “OK.” 9 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and hit enter. (If you have an HP preloaded HDD, set the path to D:\MASTERS\LAN\LNSTRM\DISK2\”) 10 Select “IBM Streamer Family Adapter” and click on “OK.” 11 Verify that “IBM Streamer Family Family Adapter [NDIS2]” is listed under “Network Dri
ملخص المحتوى في الصفحة رقم 13
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • IBM AUTO LANStreamer PCI card and drivers disk. • Driver Name for Vectra VL8 and VL7: W95setup.inf Size: 40KB Date: 9/ 17/96. • Driver Name for Vectra VE7/VE8: Streamer.vxd Size: 80KB Date: 9/13/96. • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration Vectra VL8 Vectra VL7 Ve
ملخص المحتوى في الصفحة رقم 14
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Click on “Finish.” 10 When prompted to insert the disk labeled “IBM Streamer Family Adapter Option Diskette”, click “OK.” 11 Insert Disk 1 of 5 of IBM Auto LANStreamer drivers disks and set path to “A:\” (If you have an HP pre-loaded HDD, set the path statement to “C:MASTERS\LANDRV\LNSTRM\DISK1\”). 12 Click “OK” to continue installation. 13 Click “OK” to the “Network” dialog box, to provide computer / work group names. 14 Specify yo
ملخص المحتوى في الصفحة رقم 15
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 “C:\MASTERS\LANDRV\LNSTRM\DISK4\WIN95\”) 25 Click on “Yes” button to finish the setup installation and restart your computer.
ملخص المحتوى في الصفحة رقم 16
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2
ملخص المحتوى في الصفحة رقم 17
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Requirements Workstation • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. Version 3.51 • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name for Vectra VL8 and VL7: OEMSETUP.inf Size: 67KB Date: 10/18/96 • Driver Name for Vectra VE7/VE8: Streamer.sys Size: 85KB Date: 09/ 13/96.
ملخص المحتوى في الصفحة رقم 18
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 10 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection” dialog box. 11 From the “Drop Down List”, scroll down and select “ Requires disk from manuf
ملخص المحتوى في الصفحة رقم 19
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 box.
ملخص المحتوى في الصفحة رقم 20
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51
