ملخص المحتوى في الصفحة رقم 1
TP-LINK TECHNOLOGIES CO., LTD
TL-WN8200ND
300Mbps High Power Wireless USB Adapter
Rev: 1.0.0
1910010712
ملخص المحتوى في الصفحة رقم 2
TP-LINK TECHNOLOGIES CO., LTD COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright
ملخص المحتوى في الصفحة رقم 3
TP-LINK TECHNOLOGIES CO., LTD FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication
ملخص المحتوى في الصفحة رقم 4
TP-LINK TECHNOLOGIES CO., LTD CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device has been designed to operate with the antennas listed below, and having a maximum gain of 3 dBi. Antennas not included in this list or having a gain greater than 3 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To re
ملخص المحتوى في الصفحة رقم 5
TP-LINK TECHNOLOGIES CO., LTD NCC Notice 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用， 並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射 頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Продукт сертифіковано згідно с пра в илами си ст еми УкрСЕПРО на відповідність вимога м нормативних документів та вимогам, що пере дбачені чинними законодавчими акта м и Украї н и. Safety Information When product has power button, the power button is one of the way
ملخص المحتوى في الصفحة رقم 6
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 300Mbps High Power Wireless USB Adapter Model No.: TL-WN8200ND Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 1999/5/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU The above product is in conformity w
ملخص المحتوى في الصفحة رقم 7
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Product Overview ................................................................................. 2 1.1 Introduction ............................................................................................................. 2 1.2 Features.................................................................................................................
ملخص المحتوى في الصفحة رقم 8
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Package Contents Please verify that all the package contents below are available. One TL-WN8200ND 300Mbps High Power Wireless USB Adapter Quick Installation Guide One USB extension cable One Resource CD for TL-WN8200ND, including: • TP-LINK Wireless Configuration Utility (TWCU) and Drivers • User Guide • Other helpful information Make sure that the above items are contained in the package. If any of the above items are damag
ملخص المحتوى في الصفحة رقم 9
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Chapter 1 Product Overview 1.1 Introduction The adapter is a 802.11n client device designed to deliver a high-speed and unrivaled wireless performance for your desktop. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming. With high transmission power, the TL-WN8200ND delivers up to 10 times the range of normal power USB adapter. Moreover, it is featured with its incre
ملخص المحتوى في الصفحة رقم 10
TL-WN8200ND 300Mbps High Power Wireless USB Adapter 1.3 Hardware Overview LED status: Status Working Status The driver has not been installed; Off The adapter's radio has been disabled. The driver has been installed but no data is being transmitted or Flashing Slowly received. Flashing Quickly Data is being transmitted or received. Note: When the card failed to connect to a wireless network, the LED may be off. Please choose your network and try to connect again. 3
ملخص المحتوى في الصفحة رقم 11
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Chapter 2 Installation 2.1 Hardware Installation 1. Connect one end of the USB cable to the Adapter. 2. Connect the other end of the USB cable to the USB port on your computer. Because the Adapter gets its power from the host, there is no external power supply. The LED should light up when the Adapter is plugged in and the PC is on. Note: The Found New Hardware Wizard screen will pop up when the adapter is installed correctly. Cli
ملخص المحتوى في الصفحة رقم 12
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Figure 2-1 2. The InstallShield Wizard window will appear. Click Next to continue. Figure 2-2 3. Choose a setup type. It is recommended to select Install TP-LINK Wireless Configuration Utility and Driver. Selecting Install Driver Only will only install driver. Click Next to continue. 5
ملخص المحتوى في الصفحة رقم 13
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Figure 2-3 4. Click Change… to specify the destination location for the software or you can leave it default. Click Next in the screen below to continue. Figure 2-4 5. Click Install to continue the setup. 6
ملخص المحتوى في الصفحة رقم 14
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Figure 2-5 6. The utility and drivers will install. This may take 1~2 minutes. Figure 2-6 7. After all the steps above, you will see the screen below. Click Finish to complete the setup. 7
ملخص المحتوى في الصفحة رقم 15
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Figure 2-7 8. After installation, the utility configuration page will automatically pop up as shown in the following figure and the icon will appear in your system tray. To connect to a network, please refer to Chapter 3 Connect to a Wireless Network. Figure 2-8 8
ملخص المحتوى في الصفحة رقم 16
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Chapter 3 Connect to a Wireless Network With both the hardware and software successfully installed into your computer, you can quickly connect to a wireless network using one of the following methods. Method One: To connect using TWCU (TP-LINK Wireless Configuration Utility) TL-WN8200ND uses the TP-LINK Wireless Configuration Utility as the management software. The utility provides you an easy interface to connect to a network and to c
ملخص المحتوى في الصفحة رقم 17
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Connect. If you tick Connect automatically, the adapter will automatically connect to your target network next time. Figure 3-2 3. You will be prompted different windows when you choose wireless network of different security types. 1) Wireless network of WPA/WPA2-Personal If you selected a wireless network of the security type WPA/WPA2-Personal, you will be prompted to enter the password in the security key field, as shown in Figure
ملخص المحتوى في الصفحة رقم 18
TL-WN8200ND 300Mbps High Power Wireless USB Adapter 2) Wireless network of WPA/WPA2-Enterprise If you selected a wireless network of the security type WPA/WPA2-Enterprise, you will be prompted to choose a type of authentication, either certificate or password. With Certificate as your authentication, you need to select one specific certificate from the drop-down list, as shown in Figure 3-4. With Password as your authentication, you should enter the right user name and password in the cor
ملخص المحتوى في الصفحة رقم 19
TL-WN8200ND 300Mbps High Power Wireless USB Adapter 4. Please wait a few minutes for the connection process. Figure 3-6 5. You have now successfully connected to your network. Click Close to enjoy the Internet. Figure 3-7 6. To view more information about the network currently connected, click Status in the tools section and the page will display information such as the network type, link quality and wireless mode. 12
ملخص المحتوى في الصفحة رقم 20
TL-WN8200ND 300Mbps High Power Wireless USB Adapter Figure 3-8 3.2 To connect using WPS WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly. If the wireless router supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless card and router using either Push Button Configuration (PBC) method or PIN method. 3.2.1 PBC (Push Button Configuration) method 1. Press the WPS/RESET button for 2~3 second
