ملخص المحتوى في الصفحة رقم 1
Fujitsu Microelectronics Europe
FMEMCU-UG-960011-11
User Guide
FM ² C-16FX FAMILY
ADAPTER BOARD
ADA-16FX-ETHERNET
USER GUIDE
ملخص المحتوى في الصفحة رقم 2
ADA-16FX-ETHERNET Revision History Revision History Date Issue 11.01.2008 V1.0, TKi, First Release 04.09.2008 V1.1, MSc, China-RoHS regulation added This document contains 17 pages. UG-960011-11 - 2 - © Fujitsu Microelectronics Europe GmbH
ملخص المحتوى في الصفحة رقم 3
ADA-16FX-ETHERNET Warranty and Disclaimer Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the ADA-16FX-ETHERNET Board and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of
ملخص المحتوى في الصفحة رقم 4
ADA-16FX-ETHERNET Chapter 1 Contents 1 Contents REVISION HISTORY............................................................................................................ 2 WARRANTY AND DISCLAIMER ......................................................................................... 3 1 CONTENTS...................................................................................................................... 4 2 OVERVIEW..............................................................
ملخص المحتوى في الصفحة رقم 5
ADA-16FX-ETHERNET Chapter 2 Overview 2 Overview 2.1 Abstract The ADA-16FX-ETHERNET is an adapter board that can be used together with the evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET extends the evaluation board with Ethernet connectivity. It can be used for software development and testing. The board allows the designer immediately to start with the software development before a final target system is available. 2.2 Features of adapter board ADA-16FX-ETH
ملخص المحتوى في الصفحة رقم 6
ADA-16FX-ETHERNET Chapter 3 Installation 3 Installation Remove carefully the board from the shipping box and check for any damages. Disconnect your SK-16FX-EUROSCOPE (SK-16FX-100PMC) evaluation board from USB and external power supply. Select the correct Voltage supply: ADA-16FX-ETHERNET is designed for 5V power supply. Jumper Setting Description 1-2 VCC is set to 5V (ADA-16FX-ETHERNET) JP10 (5V/3V3) 2-3 VCC is set to 3.3V Attach the adapter board to the evaluation board as shown
ملخص المحتوى في الصفحة رقم 7
ADA-16FX-ETHERNET Chapter 3 Installation 3.1 Jumper settings of ADA-16FX-ETHERNET The following jumper settings are set by default: Jumper Description / Function Type Default JP1 Use chip select line 2 solder JP 2pol. Closed JP2 Use chip select line 3 solder JP 2pol. Open JP3 Use chip select line 4 solder JP 2pol. Open JP4 Select center tap A of Ethernet jack solder JP 3pol. 1-2 JP5 Select center tap B of Ethernet jack solder JP 3pol. 1-2 Please refer to the documentation o
ملخص المحتوى في الصفحة رقم 8
ADA-16FX-ETHERNET Chapter 4 Jumpers and LED’s 4 Jumpers and LED’s This chapter describes all jumpers that can be modified and all LED’s on the adapter board. The default setting is shown with a grey shaded area. 4.1 Chip select (JP: 1, 2, 3) One out of the three chip select signals CS2, CS3 or CS4 can be selected: JP1, JP2, JP3 connect chip select signal of MCU to chip select signal of Ethernet chip Jumper Setting Description ON (closed) CS2 is connected to CHIPSEL of CS8900A JP1
ملخص المحتوى في الصفحة رقم 9
ADA-16FX-ETHERNET Chapter 4 Jumpers and LED’s 4.3 Link LED, Activity LED (LINK, ACT) These LEDs display the status of the Ethernet interface. LED Colour Description LINK Green Indicates that a link is established ACT Yellow Indicates activity on the Ethernet By default the LINK LED should light directly after connected to a network. © Fujitsu Microelectronics Europe GmbH - 9 - UG-960011-11
ملخص المحتوى في الصفحة رقم 10
ADA-16FX-ETHERNET Chapter 5 Connectors 5 Connectors 5.1 Ethernet connector (X1) This is the Ethernet jack for connecting the ADA-16FX-ETHERNET to the Ethernet. The connector complies with the 10BaseT standard. The used connector has integrated transformers for transmit and receive lines. The Ethernet jack and the Ethernet controller depends on the power supply voltage: Rx Tx Supply Voltage Used jack Ethernet Chip Adapter Board Transitions Transitions Halo HFJ11- ADA-16FX- 5V CS8900C
ملخص المحتوى في الصفحة رقم 11
ADA-16FX-ETHERNET Chapter 6 Silk-Plot of the Board 6 Silk-Plot of the Board X2 Ethernet connector X1 X3 Latch Cirrus CS8900A Latch X11 © Fujitsu Microelectronics Europe GmbH - 11 - UG-960011-11
ملخص المحتوى في الصفحة رقم 12
ADA-16FX-ETHERNET Chapter 7 Related Products 7 Related Products < SK-16FX-EUROSCOPE Evaluation board with MB96F348HS FPT-100P-M20 package < ADA-16FX-ETHERNET Adapterboard for SK-16FX-EUROSCOPE (SK-16FX-100PMC) < MB96F348HS MB96340 Series Flash MCU UG-960011-11 - 12 - © Fujitsu Microelectronics Europe GmbH
ملخص المحتوى في الصفحة رقم 13
ADA-16FX-ETHERNET Chapter 8 Information in the WWW 8 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16-, and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://mcu.emea.fujitsu.com Linear Products: Power Management, A/D and D/A Converters http://www.fujitsu.com/emea/services/microelectronics/linears/ Media Products: SAW fi
ملخص المحتوى في الصفحة رقم 14
ADA-16FX-ETHERNET Chapter 8 Information in the WWW UG-960011-11 - 14 - © Fujitsu Microelectronics Europe GmbH
ملخص المحتوى في الصفحة رقم 15
ADA-16FX-ETHERNET Chapter 9 China-RoHS regulation 9 China-RoHS regulation Evaluation Board评估板 Emulation Board 仿真板 根据SJ/T11364-2006 《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。 The following product pollution control information is provided according to SJ/T11364-2006 Marking for Control of Pollution caused by Electronic Information Products. 1．电子信息产品污染控制标志说明 Explanation of Pollution Control Label 该标志表明本产品含有超过中国标准SJ/T11363-2006 《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品 的环保使用期，表明本产品在正常使用的条件下
ملخص المحتوى في الصفحة رقم 16
ADA-16FX-ETHERNET Chapter 9 China-RoHS regulation In order to maintain the declared EFUP, the product shall be operated normally according to the instructions and environmental conditions as defined in the product manual, and periodic maintenance schedules specified in Product Maintenance Procedures shall be followed strictly. Consumables or certain parts may have their own label with an EFUP value less than the product. Periodic replacement of those consumables or parts to maintain the
ملخص المحتوى في الصفحة رقم 17
ADA-16FX-ETHERNET Chapter 10 Recycling 10 Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück. Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen Valid for European Union Countries: According to the European WEEE-Directive and its implementation into national laws w
