ملخص المحتوى في الصفحة رقم 1
Wireless N 300 Gigabit Green Router
Model # AR695W
User’s Manual
Ver. 1A
ملخص المحتوى في الصفحة رقم 2
Copyright Copyright © Airlink101, 2010. The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. They a
ملخص المحتوى في الصفحة رقم 3
Table of Contents CHAPTER 1 PRODUCT INFORMATION..............................................................................................................1 1.1 INTRODUCTION AND SAFETY INFORMATION .........................................................................................................1 1.2 PACKAGE CONTENTS ...........................................................................................................................................2 1.3 FAMILIAR WITH YOUR NEW G
ملخص المحتوى في الصفحة رقم 4
3.4.7 Schedule Rule............................................................................................................................................83 3.5 TOOLBOX...........................................................................................................................................................85 3.5.1 View Log....................................................................................................................................................86 3
ملخص المحتوى في الصفحة رقم 5
Chapter 1 Product Information 1.1 Introduction and safety information Congratulations on your purchase of the Airlink101® AR695W Wireless N 300 Gigabit Green Router. This Router is recommended to be used with AirLink101® Wireless N 300 products to provide the best performance. The high bandwidth combined with extended wireless coverage delivers fast and reliable connections for all of your networking applications. The built-in gigabit switch highly increases the wired Ethernet speed.
ملخص المحتوى في الصفحة رقم 6
1.2 Package Contents Before you start using this router, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items: 1. Wireless N 300 Gigabit Green Router 2. Two Antennas 3. Power Adapter 4. Setup CD 5. Quick Installation Guide 6. Ethernet Cable 2
ملخص المحتوى في الصفحة رقم 7
1.3 Familiar with your new Gigabit Router A. Front Panel LED Status Description Status Blinking (Green) Device status is working properly. On (Green) Router is on. On/Sleep Off Router is at power saving mode. On (Green) Network device is connected WAN Blinking Data access On (Green) Network device is connected LAN 1~4 Blinking Data access On (Green) Wireless feature is on Blinking Data access Wireless Blinking Rapidly Device is in WPS PBC mode Off Wireless feature is di
ملخص المحتوى في الصفحة رقم 8
B. Back Panel Item Name Description Antennas These antennas are detachable 3dBi dipole antennas. ON/OFF Switch on/off the router. 1 - 4 Local Area Network (LAN) ports 1 to 4. WAN Wide Area Network (WAN / Internet) port. PWR Power connector, connects to A/C power adapter. 4
ملخص المحتوى في الصفحة رقم 9
Chapter 2 Configure the Router 2.1 Connect the Router to your network Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router. Step 1 Connect one end of a network cable to the WAN port of the router and connect the other end of the cable to the DSL/Cable modem. Step 2 Power on the modem. Step 3 With another network cable, connect one end of the cable to your computer’s Ethernet port and connect the other end to one of the LAN por
ملخص المحتوى في الصفحة رقم 10
Step 4 Plug the power adapter to the router and connect it to an electrical outlet. Make sure the power switch at the back is “On”. Step 5 Power on your computer. Step 6 Check LEDs of the router: make sure Status, WAN, Wireless, and the LAN port that the computer is connected to are lit. 6
ملخص المحتوى في الصفحة رقم 11
2.2 Configure the Router with EZ Setup Wizard Step 1 Insert the Setup CD into CD-ROM drive. Step 2 When the autorun menu pops up, click EZ Setup Wizard. Note: If the autorun menu does not show up on your monitor, please go to Computer CDROM drive Wizard, and execute “EZWizard.exe”. 7
ملخص المحتوى في الصفحة رقم 12
Step 3 Select your language and click Next. Step 4 Click on Wizard. 8
ملخص المحتوى في الصفحة رقم 13
Step 5 Please make sure your computer is connected to the LAN port of the router, and your modem is connected to the WAN port of the router. Step 6 Click Next to configure the basic wireless settings. 9
ملخص المحتوى في الصفحة رقم 14
Step 7 Configure the SSID (wireless network name, i.e. myHome), Channel, Security and Key. It is suggested to select WPA2-PSK for best wireless security. Enter 8~63 characters into Key box, then click Next. Step 8 Click Next and the wizard will detect your WAN settings, or you can select your WAN type manually by checking “Let me select WAN service by myself”. 10
ملخص المحتوى في الصفحة رقم 15
Step 9 Enter the settings based on your WAN service type. Cable (Dynamic IP) If you are using cable Internet service, your WAN type is “Dynamic IP”. You do not need to configure anything here, then click Next to continue. DSL (PPPoE or Dynamic IP) For DSL users, your WAN type is either PPPoE or Dynamic IP. You can try both types and determine which one works for you. 11
ملخص المحتوى في الصفحة رقم 16
For PPPoE settings, please enter the username and password provided by your ISP (Internet Service Provider). Note: Depending on the ISP, you may need to include the domain name with your username. Example: username@sbcglobal.net Step 10 Verify the settings you have configured. Click Next to save the settings and reboot the router. This will take about 30 seconds. 12
ملخص المحتوى في الصفحة رقم 17
Step 11 Click Next to test the Internet Connection, or you can ignore the test, just open the Internet browser and verify if you are connected to the Internet. If you cannot connect to the Internet, please go to Section 4, Troubleshooting. Step 12 After the WAN service test completed, click Finish. The wizard will open the web configuration page for the router automatically unless you uncheck the checkbox below “Open the default web browser to access the advanced configuration”. 13
ملخص المحتوى في الصفحة رقم 18
You will see the status of the router on the web configuration page brought up by the web browser. Valid numbers should be assigned to IP Address, Subnet Mask and Gateway, instead of all 0’s. 14
ملخص المحتوى في الصفحة رقم 19
2.3 Configure the Router with Web Configuration Utility Another approach to configure the router is using the Wizard in the Web Configuration Utility. The wizard will guide you setting up the basic settings of this router. You do not need to go through the wizard again if you have finished 2.2 Configure the Router with EZ Setup Wizard. In order to enter the Web Configuration Utility, you need to first log in to the router from your web browser. Please follow the steps below: Step 1
ملخص المحتوى في الصفحة رقم 20
16
