ملخص المحتوى في الصفحة رقم 1
SOYO – AVRO 3001 ROUTER USER MANUAL
ملخص المحتوى في الصفحة رقم 2
Table of Content 1. Introduction............................................................................. 1 1.1 Product Overview ....................................................................................... 1 2. Hardware Description......................................................... 2 2.1 Front Panel................................................................................................... 2 2.2 Rear Panel..........................................................
ملخص المحتوى في الصفحة رقم 3
7. DDNS.................................................................................... 23 8. Tools..................................................................................... 24 8.1 Configuration Tools.................................................................................. 24 8.2 Reset ............................................................................................................ 24 9. Status ...............................................................
ملخص المحتوى في الصفحة رقم 4
1. Introduction The AVRO 3001 VoIP router is a device that combines a Voice Gateway and a Broadband Router in a single unit. The Broadband Router is designed to share a single Internet access among two or more PCs in a household and to provide Internet security for the PCs connected to its LAN ports. The AVRO 3001 VoIP router also provides Voice over IP (VoIP) functionality that enables you to make voice calls over the Internet. Please read this User Manual for advanced features of this
ملخص المحتوى في الصفحة رقم 5
2. Hardware Description 2.1 Front Panel The AVRO 3001 VoIP router includes an LED display on the front panel for system power and port indications that simplifies installation and network troubleshooting. The following is the illustration and description of LED indicators: POWER MODEM OK LAN1 LAN2 LAN3 LAN4 PHONE Figure 2-1 Function Label Status Meaning On The AVRO 3001 VoIP router is (Green) powere
ملخص المحتوى في الصفحة رقم 6
2.2 Rear Panel The rear panel contains the following items: Figure 2-2 Item Description Power Connect to the power adapter Reset Press this button for more than 5 seconds to reset and restore the default factory settings Modem Connect your cable/DSL modem to this port with an Ethernet Cable LAN 1 to 4 Fast Ethernet port (RJ-45). Connect devices on your local area network to this port (i.e., a PC, hub, or switch) with an Ethernet Cable Phone Connect your telephone to this port
ملخص المحتوى في الصفحة رقم 7
3. Default Values 3.1 Password The default username is "user" and the default password is "user". Please note that the username and password is case sensitive. For security and management reasons, we recommend that you set up a new password after you first login to the system. Once you have changed the password, it is important that you write it down and keep this information in a safe location. If you happen to forget the username and password, you can push and hold the reset button for
ملخص المحتوى في الصفحة رقم 8
4. Login AVRO 3001 VoIP router Now that you have successfully connected the AVRO 3001 VoIP router using the Quick Installation Guide and activated your Internet Phone Service, you will need to login into the AVRO 3001 VoIP router to configure it for your LAN. 1. Open your Web browser (i.e. Internet Explorer or Netscape Navigator). 2. In the Address field type in the following address: http://192.168.1.1, and press Enter. Figure 4-1 3. The AVRO 3001 VoIP router login screen will appear
ملخص المحتوى في الصفحة رقم 9
Figure 4-3 6
ملخص المحتوى في الصفحة رقم 10
5. Configure AVRO 3001 VoIP router Please note that changing some settings on the AVRO 3001 VoIP router may cause an interruption if attempted during a call. 5.1 System 5.1.1 Time Zone Set the proper time zone and configure the time server for the AVRO 3001 VoIP router. The default time zone is Eastern Standard Time. When you enable the Automatic Time Server Maintenance option you will need to configure two time servers, see example provided below. Figure 5-1 5.1.2 Password Setting
ملخص المحتوى في الصفحة رقم 11
Figure 5-2 5.1.3 Remote Management The Remote Management feature can restrict the access to your AVRO 3001 VoIP router from the Internet. Unless you have a need to access AVRO 3001 VoIP router from outside your home, this feature should be disabled. You can enable it from a specific IP address or from any outside IP address. The IP setting of "0.0.0.0" allows any person from any IP address to login into the device. When the Enabled check box is not checked, the remote login feature wil
ملخص المحتوى في الصفحة رقم 12
VoIP router. Figure 5-4 5.2 WAN Settings The AVRO 3001 VoIP router supports 3 types of WAN connection: • Dynamic IP • PPPoE • Static IP 5.2.1 Dynamic IP This mode allows the AVRO 3001 VoIP router to enable its DHCP client to get an IP address from your High Speed Service Provider. The Host Name is optional, but may be required by some High Speed Service Providers. The default MAC address is set to the WAN’s physical interface on the AVRO 3001 VoIP rou
ملخص المحتوى في الصفحة رقم 13
Figure 5-5 5.2.2 PPPoE (PPP over Ethernet) This mode allows the AVRO 3001 VoIP router to act as a PPPoE client. You will be required to enter the PPPoE username and password originally provided by your High Speed Service Provider. The Service Name is normally optional; some High Speed Service Providers may require it. Enter a Maximum Idle Time to define the maximum period of time for which the Internet connection is maintained during periods of inactivity. If the connection is inactive
ملخص المحتوى في الصفحة رقم 14
enter the assigned IP address, subnet mask, and the gateway address here. Figure 5-7 5.2.4 DNS Most service providers provide a DNS server via DHCP or PPPoE for speed and convenience. If you have a static IP address, or if there is a DNS server that you would rather use, you need to specify the primary and secondary IP address here. When the primary DNS does not work, the system will automatically use the secondary DNS. Figure 5-8 5.3 LAN Settings You can enable DHCP to dynamically
ملخص المحتوى في الصفحة رقم 15
default range is 192.168.1.100 through 192.168.1.199. The domain name field is empty in most cases. Some ISPs may need you to input a domain name within the Domain Name field. Figure 5-9 5.4 NAT Settings 5.4.1 Address Mapping The AVRO 3001 VoIP router supports multiple public IP addresses. It allows IP addresses used in a private local network to be mapped to one or more addresses used in the public Internet. This page allows you to enter up to 10 address mappings between a set of p
ملخص المحتوى في الصفحة رقم 16
Figure 5-10 5.4.2 Virtual Server The AVRO 3001 VoIP router has NAT router functionality. All the IP addresses coming in and going out to the AVRO 3001 VoIP router are converted between public and private IP addresses. You can configure the AVRO 3001 VoIP router as a virtual server so that remote users accessing services such as the Web or FTP at your local sites via public IP address can be automatically redirected to local servers configured with private IP address. In other words, d
ملخص المحتوى في الصفحة رقم 17
Some popular applications and protocol/port numbers mapping are listed below: Application Protocol Port Number Telnet TCP 23 FTP TCP 21 SMTP TCP 25 POP3 TCP 110 H.323 TCP 1720 SNMP UDP 161 SNMP Trap UDP 162 HTTP TCP 80 PPTP TCP 1723 PC Anywhere TCP 5631 PC Anywhere UDP 5632 Table 5-1 5.4.3 Special Applications Some applications require multiple connections, such as Internet gaming and video conferencing. These applications cannot work when Network Address Translation (NAT) is e
ملخص المحتوى في الصفحة رقم 18
Some of the applications are listed below: Trigger Port Trigger Type Public Port Public Type Comment 28800 UDP 2300-2400 UDP/TCP MSN Game 47624,28800 zone 6112 UDP 6112 UDP Battle.net Table 5-2 5.5 Firewall The AVRO 3001 VoIP router provides firewall protection by restricting connection parameters to limit the risk of intrusion attempts, by defending against a wide array of common intrusion types. When the firewall is enabled, extra checking will be performed for each of the packets
ملخص المحتوى في الصفحة رقم 19
Figure 5-14 Normal Filtering Table You can press Add PC to edit packet filtering rules. Figure 5-15 When you click Add PC, the following "Access Control Add PC" page will appear: 16
ملخص المحتوى في الصفحة رقم 20
Figure 5-16 This page allows you to define service limitations of a specific PC, including IP address, service type and scheduling rule criteria. For URL blocking function, you will need to configure the URL address first in the "URL Blocking Site" page. For scheduling function, you will also need to configure schedule rule first in the "Schedule Rule" page. You will need to enter the Client PC Description (e.g. NoteBook1), and it’s associated IP address (192.168.1.100), then select the s
