ملخص المحتوى في الصفحة رقم 1
MULTIFUNCTIONAL DIGITAL SYSTEMS
Operator's Manual for
Wireless LAN Module
GN-1050
ملخص المحتوى في الصفحة رقم 2
©2008, 2009 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC. No patent liability is assumed, however, with respect to the use of the information contained herein.
ملخص المحتوى في الصفحة رقم 3
Preface Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This manual explains the instructions for Wireless LAN Module GN-1050. Read this manual before using your Multifunctional Digital Systems or Multifunctional Digital Color Systems. Keep this manual within easy reach, and use it to configure an environment that makes best use of the e-STUDIO’s functions. How to read this manual Symbols in this manual In this manual, some importan
ملخص المحتوى في الصفحة رقم 4
Trademarks The official name of Windows 2000 is Microsoft Windows 2000 Operating System. The official name of Windows XP is Microsoft Windows XP Operating System. The official name of Windows Vista is Microsoft Windows Vista Operating System. The official name of Windows 7 is Microsoft Windows 7 Operating System. The official name of Windows Server 2003 is Microsoft Windows Server 2003 Operating System. The official name of Windows Server 2008 is Microsoft Windows Server 2008 Operating Sy
ملخص المحتوى في الصفحة رقم 5
Precautions Precautions for Use This product is classified as “wireless equipment for stations of low-power data transmissions systems” under the Wireless Telegraphy Act, and does not require a radio transmission license. The law prohibits modification of the interior of this product. About TOSHIBA Wireless Solution The Wireless LAN Module is a wireless network Module that complies with the IEEE 802.11 standard on wireless LANs (Revision B/G). The Wireless LAN Module supports data rates up
ملخص المحتوى في الصفحة رقم 6
WARNING Keep this product away from a cardiac pacemaker at least 22 cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles. Do not use the product inside a medical facility or near medical electric equipment. Radio waves can potentially affect medical electric equipment, thereby causing an accident due to malfunction. Do not use the product near an automatic door, fire alarm or other automatic control equipment. Radio waves can potentially aff
ملخص المحتوى في الصفحة رقم 7
Regulatory Information The TOSHIBA Wireless LAN must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards. Standards below are certified under the operation with the provided antenna (GN-3010). Do not use this product with other antennas. Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
ملخص المحتوى في الصفحة رقم 8
Hiermit erklärt TOSHIBA TEC die Übereinstimmung des Gerätes GN-1050 mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ TOSHIBA TEC ∆ΗΛΩΝΕΙ ΟΤΙ GN-1050 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ EK Toshiba TEC Corporation µ µ GN-1050 µ µ LAN µµ µ 1999/5/E Con la presente TOSHIBA TEC dichiara che questo GN-1050 è conforme ai requisiti essenziali e
ملخص المحتوى في الصفحة رقم 9
Regulatory Notice for Channel Use in France The number of channels that can be used for wireless LAN differs from country to country. In France however, user only 4 channels (channel 10, 11, 12, 13) when using wireless networks. Channel 10 (2457 MHz) Channel 11 (2462 MHz) Channel 12 (2467 MHz) Channel 13 (2472 MHz) France limited to 2446.5-2483.5 MHz Indoor use. Belgium limited to 2400-2483.5 MHz Indoor, 2460-2483.5 MHz Outdoor use. Singapore Portion Approved Countries/Regions for use fo
ملخص المحتوى في الصفحة رقم 10
ملخص المحتوى في الصفحة رقم 11
CONTENTS Preface....................................................................................................................................... 1 Precautions............................................................................................................................... 3 Chapter 1 SETTING UP WIRELESS NETWORK Before Setting Up Wireless Network .................................................................................... 12 Planning for installation ..................
ملخص المحتوى في الصفحة رقم 12
10 CONTENTS
ملخص المحتوى في الصفحة رقم 13
1.SETTING UP WIRELESS NETWORK This chapter describes about the preparations before setting up the wireless settings of the equipment. Before Setting Up Wireless Network.................................................................................... 12 Planning for installation ........................................................................................................................................12 Setting Up the Infrastructure Mode ............................................
ملخص المحتوى في الصفحة رقم 14
1 SETTING UP WIRELESS NETWORK Before Setting Up Wireless Network This product is a Wireless LAN Module using the 2.4 GHz spectrum diffusion system, and is compatible with IEEE Standard 802.11g and 802.11b for wireless LAN. When the Wireless LAN is enabled, users can perform the following printing through the Wireless LAN: Raw TCP Printing from Windows computers LPR Printing from Windows computers LPR Printing from Macintosh computers LPR Printing from UNIX/Linux workstation The instructions
ملخص المحتوى في الصفحة رقم 15
1 SETTING UP WIRELESS NETWORK 1.SETTING UP WIRELESS NETWORK Determine the SSID In the wireless network, the same SSID (Service Set ID) must be assigned in each wireless device. Only wireless devices that have the same SSID assigned to them can communicate with each other through the wireless network. In the Infrastructure Mode, the SSID is usually set in the Access Point. Therefore, you must set the same SSID in this equipment to communicate through the wireless network via the Access Point
ملخص المحتوى في الصفحة رقم 16
1 SETTING UP WIRELESS NETWORK WEP The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices. Compared with WPA/WPA2 and WPAPSK/WPA2PSK, the WEP is less security. If the wireless network is configured in the Infrastructure Mode and the Access Point supports WPA/WPA2 or WPAPSK/WPA2PSK, it is recommended to use WPA/ WPA2 or WPAPSK/WPA2PSK rather than WEP. The WEP authentication is available for both the Infrastructure Mode and Ad Hoc Mode. 14 Bef
ملخص المحتوى في الصفحة رقم 17
1 SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode The wireless settings can be operated from the Control Panel of this equipment. When setting up the equipment for the wireless network in the Infrastructure Mode, follow the steps below. 1. Select the network type P.15 “Select network type” 2. Specify the SSID P.18 “Specify SSID” 3. Select the security mode P.21 “Select security mode” Select network type First access the WIRELESS SETTING screen from the ADMIN menu from the Touc
ملخص المحتوى في الصفحة رقم 18
1 SETTING UP WIRELESS NETWORK Press the [WIRELESS SETTINGS]. 5 The WIRELESS SETTINGS menu is displayed. Press the [WIRELESS SETTINGS]. 6 The WIRELESS SETTINGS screen is displayed. It may take a time to display the WIRELESS SETTINGS screen. Press the [ON] and press the [NEXT]. 7 The NETWORK TYPE screen is displayed. 16 Setting Up the Infrastructure Mode
ملخص المحتوى في الصفحة رقم 19
1 SETTING UP WIRELESS NETWORK 1.SETTING UP WIRELESS NETWORK Press the [INFRASTRUCTURE] and press the [NEXT]. 8 The SSID SETTINGS screen displayed. 9 Continue to the procedure for specifying the SSID. P.18 “Specify SSID” Setting Up the Infrastructure Mode 17
ملخص المحتوى في الصفحة رقم 20
1 SETTING UP WIRELESS NETWORK Specify SSID When you select the Infrastructure Mode for the network type, you can specify the SSID by selecting the available network list or manually entering the SSID. P.18 “Selecting the SSID from the available network list” P.19 “Entering the SSID manually” If you are not sure how the SSID must be specified, see the following section to determine the SSID. P.13 “Determine the SSID” Selecting the SSID from the available network list This equipment can sear
