ملخص المحتوى في الصفحة رقم 1
1
ملخص المحتوى في الصفحة رقم 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
ملخص المحتوى في الصفحة رقم 3
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: - EN60950-1:2006 Safety of Information Technology Equipment - EN50385 : (2002-08) - Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication
ملخص المحتوى في الصفحة رقم 4
Česky TRENDware tímto prohlašuje, že tento TEW-637AP je ve shodě se základními [Czech] požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk Undertegnede TRENDware erklærer herved, at følgende udstyr TEW-637AP [Danish] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch Hiermit erklärt TRENDware, dass sich das Gerät TEW-637AP in Übereinstimmung mit [German] den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Rich
ملخص المحتوى في الصفحة رقم 5
Contents Package Contents .................................................................................................................... 6 Minimum System Requirements ............................................................................................... 6 Introduction ............................................................................................................................... 7 Features .........................................................................
ملخص المحتوى في الصفحة رقم 6
Package Contents TEW-637AP Multi-Language Quick Installation Guide CD-ROM (Setup Wizard and User’s Guide) 1 x network cable(0.6 m/ 2 ft.) Power adapter (12vDC 0.5A) Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product. Minimum System Requirements Installation Requirements • Web Browser: Internet Explorer (6 or higher) Mozilla or Safari. • A computer wi
ملخص المحتوى في الصفحة رقم 7
Introduction The 300Mbps Wireless Easy-N-UpgraderTM upgrades your old, perfectly functioning router, to high speed wireless n. Enjoy up to 12 times the speed and 6 times the coverage of a wireless g network Eliminate wireless dead spots, seamlessly surf the Internet and help the environment by not throwing away your old router. GREENwifi technology reduces energy consumption by up to 50%. The compact 300Mbps Wireless Easy-N-UpgraderTM is designed around ease of use, performance and envir
ملخص المحتوى في الصفحة رقم 8
HARDWARE OVERVIEW WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks green during wireless data transmission. WPS LED This LED blinks green during WPS function is enabled. LAN LED Front View A solid light indicates a connection to a Router on the LAN port. This LED blinks green during data transmission POWER LED A solid green light indicates a proper connection to the power supply WPS Button Press the button to e
ملخص المحتوى في الصفحة رقم 9
Auto MDI/MDIX 10/100Mbps LAN Ports This port automatically senses the cable type when connecting to Router. Reset Buttonressing the reset button restores the AP to its original factory default settings. Power Switch (EU version) Rear View On/off Switch DC-IN The DC power input connector is a single jack socket to supply power to the TEW-638APB. Please use the Power Adapter provided on the TEW-638APB package.
ملخص المحتوى في الصفحة رقم 10
INSTALLATION CONSIDERATIONS There are a number of factors that can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. 2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions
ملخص المحتوى في الصفحة رقم 11
Getting Started For a typical wireless setup at home or office, please do the following: 1. Connect one end of the provided network cable into your computer’s network port, and connect the other end of the provided network cable into the TEW-637AP’s Ethernet port. 2. Plug the power adapter to outlay, and connect the power jack to the TEW-637AP. 3. Verify that the Power & Ethernet LEDs are lit. 4. Insert Setup Wizard CD into your CD-ROM drive. 5. The Welcome screen appears on your monit
ملخص المحتوى في الصفحة رقم 12
8. Plug in the power adapter of the TEW-638APB and plug in the device that you will be connecting together. Verify the Power & Ethernet LEDs are light. EU Version please make sure the power switch is on the On position 9. Your computer will detect TEW-637AP and the Device List screen appears on your monitor. Click Configure button to continue (default TEW-638APB IP Address is 192.168.10.100). 10. Page 12
ملخص المحتوى في الصفحة رقم 13
11. Enter password for the Access Point. The default password is “admin”. Click Login button to continue. 12. The default IP address is 192.168.10.100, you can choose to obtain network setting automatically, or set the IP address manually. After setting, click Next to continue. 13. The default IP address is 192.168.10.100, you can choose to obtain network setting automatically, or set the IP address manually. After setting, click Next to continue. 14. Select Wi-Fi Protected
ملخص المحتوى في الصفحة رقم 14
15. Use Push Button Method, click Connect button to continue. You also need to enable WPS function of the wireless client device to make connection. 16. Use PIN Method and enter your wireless client PIN number on Wireless Device PIN, and then click Connect button to make wireless connection. 17. To set TEW-638APB security, select Manual setup and click Next button Page 14
ملخص المحتوى في الصفحة رقم 15
18. Enter SSID of TEW-638APB, click Next button. 19. Choice Wireless Mode. 20. To disable Security Mode, select None and click Next button. Page 15
ملخص المحتوى في الصفحة رقم 16
21. To use WEP security, select WEP and click Next button. Select 64-bit or 128-bit WEP key length, and enter your WEP key. For 64-bit encryption, enter 10 hexadecimal characters, For 128-bit encryption, enter 26 hexadecimal characters. Click Next to continue the setting. 22. To use WPA or WPA2 security, select WPA or WPA2 and click Next button. Select WPA Mode: WPA Only, WPA2 Only, WPA or WPA2, and set Pre-Shared Key by entering 8 ~ 63 characters. Click Next to continue the sett
ملخص المحتوى في الصفحة رقم 17
23. Confirm your new settings. It is recommended that you save or print your wireless settings with the Save or Print buttons. Once finished, click Configure to continue. 24. Save you setting to a text file in a desired location. 25. Congratulations you have configured you TEW-637AP. Page 17
ملخص المحتوى في الصفحة رقم 18
Using the Configuration Menu Whenever you want to configure your TEW-637AP, you can access the Configuration Menu by opening the Web-browser and typing in the IP Address of the TEW-637AP. Open the Web browser. Type in the current IP Address of the AP (i.e. http://192.168.10.100). If you have changed the default IP Address assigned to the TEW-637AP, make sure to enter the correct IP Address. Type admin in the User Name field. type the Password admin. Click OK. P
ملخص المحتوى في الصفحة رقم 19
Network The Network tab provides the following configuration options: LAN Setting. NETWORK LAN SETTING These are the settings of the LAN (Local Area Network) interface for the Access Point. The Access Point's local network (LAN) settings are configured based on the IP Address and Subnet Mask assigned in this section. The IP address is also used to access this Web-based management interface. LAN Connection Type Choose "Static IP (fixed IP)" if your router does not support DHCP or
ملخص المحتوى في الصفحة رقم 20
Wireless The wireless section is used to configure the wireless settings for your Access Point. Note that changes made in this section may also need to be duplicated on wireless clients that you want to connect to your wireless network. To protect your privacy, use the wireless security mode to configure the wireless security features. The Wireless tab provides the following configuration options: Basic, Advanced, MAC Filter, Security, WPS and Station List. WIRELESS BASIC Repeat
