Q-See - Digital Peripheral SolutionsQT428 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide
QT4 Series Network DVRs
with H.264 Compression
QT454 - 4 Channel DVR
QT428 - 8 Channel DVR
QT426 - 16 Channel DVR
QT446 - 16 Channel DVR
IMPORTANT! This walkthrough will allow you to test your cameras and connections before you mount them.
Before You Get Started
A: Gather Your Components. B: Unpack the box...
You will need: Check the contents against the “What’s in the Box” list that was
packed at the top of your product. If you notice any damage or
1. A 19” or larger VGA P

ملخص المحتوى في الصفحة رقم 2

Connect the Devices STEP 1 Turning on the DVR 1. Connect the power cable to the DVR 2. Connect the power adapter to the power cable. 3a. Plug the power cable into a surge protector b. QT428 and QT446 DVRs - Turn on the DVR using the power switch on the rear panel. 3a 3a 3b 3b You will hear a beep as the DVR powers up. STEP 2 Connect to a VGA Monitor or Television STEP 3 Connect Mouse Plug the mouse into the port labled “USB” on the rear OPTION A: Connecting a VGA PC Monitor OPTION B: Connect

ملخص المحتوى في الصفحة رقم 3

Control Bar Click on any icon to use that feature. Menu: Opens the Main Menu. Screen Display Mode: Choose the number of screens you wish to view The basic functions of the Control Bar are listed to the right. Each function is covered in more detail within the manual. simultaneously. Channels without attached cameras will display “Video Loss.” Clicking on the upward pointing arrows to the right of each icon will allow you to select which channels to view in that mode. Dwell: Enable/disable th