ملخص المحتوى في الصفحة رقم 1
TM
MXI
MXI-Express Series User Manual
MXI-Express Multisystem eXtension Interface for PCI Express, Compact PCI,
and PXI Bus Computers
NI PCIe-8360
NI PXI-8360
MXI-Express Series User Manual
May 2005
371452A-01
ملخص المحتوى في الصفحة رقم 2
Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide Offices Australia 1800 300 800, Austria 43 0 662 45 79 90 0, Belgium 32 0 2 757 00 20, Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 6555 7838, Czech Republic 420 224 235 774, Denmark 45 45 76 26 00, Finland 385 0 9 725 725 11, France 33 0 1 48 14 24 24, Germany 49 0 89 741 31 30, India 91
ملخص المحتوى في الصفحة رقم 3
Important Information Warranty The NI PCIe-8360 and NI PXI-8360 are warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor. The media on which you receive National Instruments software are warranted not to fail to execute program
ملخص المحتوى في الصفحة رقم 4
Compliance Compliance with FCC/Canada Radio Frequency Interference Regulations Determining FCC Class The Federal Communications Commission (FCC) has rules to protect wireless communications from interference. The FCC places digital electronics into two classes. These classes are known as Class A (for use in industrial-commercial locations only) or Class B (for use in residential or commercial locations). All National Instruments (NI) products are FCC Class A products. Depending on where it
ملخص المحتوى في الصفحة رقم 5
Contents About This Manual Conventions ...................................................................................................................vii Related Documentation..................................................................................................viii Chapter 1 Introduction About the MXI-Express Series ......................................................................................1-1 Description and Features ...................................................
ملخص المحتوى في الصفحة رقم 6
Contents Appendix B Common Questions Appendix C Technical Support and Professional Services Glossary Index MXI-Express Series User Manual vi ni.com
ملخص المحتوى في الصفحة رقم 7
About This Manual This manual describes the features, functions, and operation of the MXI-Express series of products. The products in this series are the NI PCIe-8360 and the NI PXI-8360. Conventions The following conventions appear in this manual: » The » symbol leads you through nested menu items and dialog box options to a final action. The sequence File»Page Setup»Options directs you to pull down the File menu, select the Page Setup item, and select Options from the last dialog box. Thi
ملخص المحتوى في الصفحة رقم 8
About This Manual Related Documentation The following documents contain information that you might find helpful as you read this manual: Set Up Your MXI-Express System Your computer or chassis documentation PXI Hardware Specification, Revision 2.1 PXI Software Specification, Revision 2.1 PCI Specification, Revision 2.3 PCI-PCI Bridge Architecture Specification, Revision 1.1 PICMG CompactPCI 2.0 R3.0 specification PCI Express Specification, Revision 1.0a MXI-Express Series User M
ملخص المحتوى في الصفحة رقم 9
1 Introduction This chapter describes the MXI-Express series of products, lists what you need to get started, and explains how to unpack and set up your hardware. The two products in this series are the NI PCIe-8360 and NI PXI-8360. For the remainder of this manual the term MXI-Express card refers to any product in the MXI-Express series. MXI-Express cards must always be installed as a PCI Express card and a PXI card. About the MXI-Express Series Description and Features MXI-Express function
ملخص المحتوى في الصفحة رقم 10
Chapter 1 Introduction PC to PXI/CompactPCI Figure 1-1. Basic MXI-Express Configuration Larger MXI-Express Systems Each NI PCIe-8360 has two MXI-Express connectors. One NI PCIe-8360 may be connected to two different NI PXI-8360 cards in separate PXI/CompactPCI chassis. If multiple PCI Express slots are available in the host PC, additional PXI chassis can be connected by installing an NI PCIe-8360 in any available PCI Express slot. Figure 1-2 shows how you can use MXI-Express cards to connec
ملخص المحتوى في الصفحة رقم 11
Chapter 1 Introduction What You Need to Get Started To set up and use your MXI-Express cards, you need the following: ❑ One NI PCIe-8360 and one NI PXI-8360 ❑ A MXI-Express cable ❑ A host PC with an available x1 (or wider) PCI Express slot ❑ An expansion chassis—the PXI/CompactPCI chassis that you control with MXI-Express Note Your PXI MXI-Express card will work in any standard CompactPCI chassis adhering to the PICMG CompactPCI 2.0 R3.0 specification, or in PXI chassis that are compatible wi
ملخص المحتوى في الصفحة رقم 12
2 Hardware Installation This chapter explains how to install the MXI-Express hardware. Hardware Installation The following are general instructions for installing the MXI-Express cards. Consult your computer user manual or technical reference manual for specific instructions and warnings. Note The software for your MXI-Express kit is included with the current NI driver CD, and is installed with the PXI platform software included as part of NI-VISA and other NI driver software products. Insta
ملخص المحتوى في الصفحة رقم 13
Chapter 2 Hardware Installation 6. Line up the NI PCIe-8360 with the slot on the back panel. Slowly push down on the top of the NI PCIe-8360 until its card-edge connector is resting on the expansion slot receptacle. Using slow, evenly distributed pressure, press the NI PCIe-8360 straight down until it seats in the expansion slot. 7. Reinstall the bracket-retaining screw to secure the NI PCIe-8360 to the back panel rail. 8. Replace the computer cover. 3 2 1 1 NI PCIe-8360 3 PCI Express Slot
ملخص المحتوى في الصفحة رقم 14
Chapter 2 Hardware Installation Installing an NI PXI-8360 Complete the following steps to install the NI PXI-8360 in your PXI or CompactPCI chassis. 1. Power off your PXI or CompactPCI chassis, but leave it plugged in while installing the NI PXI-8360. The power cord grounds the chassis and protects it from electrical damage while you install the module. 2. Select a slot for the NI PXI-8360. The NI PXI-8360 must be installed in the controller slot (slot 1 in PXI). Caution To protect both your
ملخص المحتوى في الصفحة رقم 15
Chapter 2 Hardware Installation Figure 2-2 shows an NI PXI-8360 just before installation in the system controller slot of a National Instruments chassis. 1 2 4 3 1 PXI/Compact PCI Chassis 3 Ejector Handle in Down Position 2 NI PXI-8360 4 PXI/Compact PCI Slot 1 Figure 2-2. NI PXI-8360 Card Before Installation Cabling 1. Connect the appropriate MXI-Express cable to both MXI-Express cards. The cables have no polarity, so either end may be connected to either card. Caution Do not remove the cabl
ملخص المحتوى في الصفحة رقم 16
Chapter 2 Hardware Installation Powering Up the MXI-Express System 1. Power on all of the expansion chassis in any order you choose. 2. Power on the host. Typical PCI-PCI bridges are used to add PCI devices to a PCI hierarchy in which all the bridges and devices are contained within a single chassis. Because of this, BIOSes and operating systems make the assumption that all PCI devices in the entire hierarchy will be available as soon as code execution begins at power-up time. This assumptio
ملخص المحتوى في الصفحة رقم 17
3 Hardware Overview This chapter presents an overview of MXI-Express hardware functionality and explains the operation of each functional unit. Functional Overview MXI-Express is based on PCI Express technology. A MXI-Express kit uses a PCI Express switch and PCI Express-to-PCI bridge to enable control of a PXI or CompactPCI chassis from a PC with an available PCI Express slot. The PCI Express-to-PCI bridge architecture is transparent to device drivers, so no additional software is needed t
ملخص المحتوى في الصفحة رقم 18
Chapter 3 Hardware Overview NI PCIe-8360 PXI-8360 Cabled PCI Express Connector PCI Express Switch Cabled Cabled PCI Express PCI Express PCI Express to PCI Bridge Connector Connector Figure 3-1. MXI-Express Block Diagram Functional Unit Descriptions PCI Express x1 Card Edge Connector The card edge connector allows you to use the NI PCIe-8360 in a x1 or wider PCI Express slot in a PC. The PCI Express Card Electromechanical Specification defines this connector. PCI Express x1 Switch The PCI Expr
ملخص المحتوى في الصفحة رقم 19
Chapter 3 Hardware Overview PCI Express-to-PCI Bridge The PCI Express Base Specification defines a PCI Express-to-PCI bridge as a device that connects a PCI Express fabric and a PCI hierarchy. On the NI PXI-8360, the PCI Express-to-PCI bridge connects the x1 PCI Express link and the PCI bus in a PXI or CompactPCI chassis. LED Indicators The LEDs on MXI-Express give status information about power supplies and link state. The NI PCIe-8360 has two tri-color LEDs, one for each port on the panel
ملخص المحتوى في الصفحة رقم 20
Chapter 3 Hardware Overview MXI-Express Cable Options MXI-Express is available with cables of various lengths. Table 3-1 shows the cables available from National Instruments. Table 3-1. National Instruments MXI-Express Cables Cable Length (Meters) Description 3 m MXI-Express copper cable 7 m MXI-Express copper cable MXI-Express Series User Manual 3-4 ni.com
