ملخص المحتوى في الصفحة رقم 1
Hard Disk Drive (HDD)
Installation Instructions
59393401
ملخص المحتوى في الصفحة رقم 2
© 2007 by Oki Data Americas, Inc. All rights reserved. Document P/N 59383401 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Ment
ملخص المحتوى في الصفحة رقم 3
Installation 1. Turn off the printer and detach the power cord from the back of the printer. 2. Detach the interface cable. 3
ملخص المحتوى في الصفحة رقم 4
3. Open the top cover. 4
ملخص المحتوى في الصفحة رقم 5
Warning! If the printer has been powered on recently, the fuser will be hot. This area is clearly labeled. 4. Press the release and open the front cover. 5
ملخص المحتوى في الصفحة رقم 6
5. Loosen the thumbscrew holding the printer side panel in place. 6
ملخص المحتوى في الصفحة رقم 7
6. Lift up on the ends of the side panel, then remove it from the printer. 7
ملخص المحتوى في الصفحة رقم 8
7. Slide the access door in the metal plate and open it. 8. Remove the HDD from its shipping package. Caution! Observe antistatic precautions when installing the hard disk drive. 8
ملخص المحتوى في الصفحة رقم 9
9. Plug the connecting cable (1) firmly into the connector (2) on the printer, then tighten the two thumbscrews (3). 9
ملخص المحتوى في الصفحة رقم 10
10. Close the access cover and slide it to secure it in the metal plate. 11. Replace the side panel on the printer. 10
ملخص المحتوى في الصفحة رقم 11
12. Use the thumbscrew to secure the panel. 13. Close the front cover. 11
ملخص المحتوى في الصفحة رقم 12
14. Close the top cover. 15. Attach the interface cable. 16. Plug the power cord into the back and turn on the printer. 12
ملخص المحتوى في الصفحة رقم 13
Verify the Installation Print the MenuMap 1. Press + one or more times until INFORMATION MENU appears on the display. 2. Press ENTER twice. The MenuMap prints. 3. Look at the top of the printout: HDD: installed should appear. If you see HDD: uninstalled, repeat the installation stepschecking to be sure that the Hard Disk Drive is firmly seated in the printer connectoruntil it does. 13
ملخص المحتوى في الصفحة رقم 14
Activate the HDD in the Driver ® Windows Postscript Emulation Driver 1. First Windows Vista a. Click Start → Settings → [Hardware and Sound] Printer. The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Faxes. The Printers and Faxes dialog box opens. Windows 2000 a. Click Start → Settings → Printers. The Printers dialog box opens. 2. Right click the appropriate printer icon. Click Properties. 3. Click the Device Settings tab. 4. Scroll down to Instal
ملخص المحتوى في الصفحة رقم 15
5. Select Installed. 6. Click OK and close the dialog box. PCL Driver 1. First Windows Vista a. Click Start → Settings → [Hardware and Sound] Printer. The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Faxes. The Printers and Faxes dialog box opens. Windows 2000 a. Click Start → Settings → Printers. The Printers dialog box opens. 2. Right click the PCL printer icon. Click Properties. 3. Click the Device Option(s) tab. 4. Click Printer Hard Disk. 5.
ملخص المحتوى في الصفحة رقم 16
3. Click Printer → Setup. 4. Click Configure. 5. Select Hard Disk in the Change drop-down menu. 6. Change the setting of the next drop-down menu to Installed. 7. Click OK twice and close Chooser. Mac OS 10.2, 10.3, 10.4 1. First OS 10.2 a. Activate Print Center: Local Hard Drive → Applications → Utilities → Print Center. OS 10.3, 10.4 a. Activate the Printer Setup Utility: Local Hard Drive → Applications → Utilities → Printer Setup Utility. 2. Highlight the printer name. Select from the
