ملخص المحتوى في الصفحة رقم 1
HP StorageWorks 70
Modular Storage Array
setup poster
Audience assumptions
This document is for the person who installs, administers, and
troubleshoots servers and storage systems. HP assumes you are qualified
in the servicing of computer equipment and trained in recognizing
hazards in products with hazardous energy levels.
Regulatory compliance notices
Regulatory compliance identification numbers
For the purpose of regulatory compliance certi
ملخص المحتوى في الصفحة رقم 2
Site requirements Installing enclosure into a rack Select an installation site that meets the following requirements: NOTE: When installing servers, HP recommends installing • Space • Temperature all enclosures at the bottom of the rack. To optimize • Power • Rack cabling access, avoid interleaving the enclosure and server • Grounding • Airflow products. Detailed installation site requirements for this product are 1. Secure the front end of the rails to the rack. described in
ملخص المحتوى في الصفحة رقم 3
5. Use the shipping bracket to secure the storage enclosure Cascading (1+1) configuration for shipping: IMPORTANT: Use of the shipping bracket is required only when the rack is shipped with the MSA70 Enclosure installed. a. Loosen the thumbscrew on the shipping bracket. b. Slide the shipping bracket forward until it engages the chassis. c. Tighten the thumbscrew. If you are installing the storage enclosure into a telco rack, order the appropriate option kit at the RackSolutions w
ملخص المحتوى في الصفحة رقم 4
To power up the storage enclosure: Additional information 1. Complete server hardware installation and cabling. See For more information about this product, see the HP the server documentation. StorageWorks Modular Smart Array 70 Storage Enclosure user 2. Connect the SAS cables and power cords to the enclosure. guide on the Documentation CD. See “Choosing a configuration” on this poster. To receive proactive support alerts (such as Customer 3. Press and hold the Power On/Standby button
