ملخص المحتوى في الصفحة رقم 1
- P1 (Left & Right)
- P2 Subwoofer
ملخص المحتوى في الصفحة رقم 2
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
ملخص المحتوى في الصفحة رقم 3
Important Safety/Service Instructions...........................................................................................1 Plasma Series Owner’s Manual ................................................................................................... 2 Safety First ................................................................................................................................... 3 Description ..............................................................
ملخص المحتوى في الصفحة رقم 4
Safety First ® When setting up, installing and using Electro-Voice Plasma speaker systems, there are a number of precautions that you should follow: ® · When Electro-Voice Plasma speakers are used for portable applications in which they will be stacked directly on the floor, make sure that the floor or stage is solid and secure. Make sure to: · Route cables and position the stand so that performers, production crew and audience members will not trip over the stand or cables and pull the speake
ملخص المحتوى في الصفحة رقم 5
Description ® Electro-Voice Plasma high powered loudspeakers are fully integrated audio systems with carefully matched electronics and transducers. These products make it easy to setup a high- quality sound system quickly with a minimum of cables and external electronics. It retains typical EV ruggedness, reliability and impeccable sound quality. System Features - Plasma · Two built-in power amplifiers, one for low frequencies and one for high frequencies. The amplifiers also contain electronic
ملخص المحتوى في الصفحة رقم 6
P1 and P2 Amplifiers Input Electronically balanced inputs for the connection of high-level signal sources such as mixers, signal processors, etc. Establishing the connection is possible via phone or XLR-type jacks. Balanced connection is recommended to prevent noise or HF-interference. Caution: Before connecting or disconnecting any plugs, make sure to set the level control to its counterclockwise stop, which prevents the system, the audience and yourself from being stressed by nasty contact noi
ملخص المحتوى في الصفحة رقم 7
Status Indicators These indicators provide information about the actual operational state of the Plasma’s internal power amplifier. Signal Indicates that an audio signal is present at the input and that it is output. Limit When lit this indicator signals that the internal power amplifier actually operated at the threshold of clipping. Short-term blinking is not critical, because the amp’s audio limiter keeps distortion under control, so that the sound is unaffected. Input overdrive, which resu
ملخص المحتوى في الصفحة رقم 8
! " Setup Diagrams for Plasma · Plug a line input into either the ¼-inch or the 3-pin XLR-type input connector. The ¼- inch input is in the center of the XLR connector and can accept unbalanced or balanced lines (TRS ¼-inch). The line input level required to drive the unit to full power is from – 12 dBu to 0 dBu. The system’s level control regulates the overall output level of the system.
ملخص المحتوى في الصفحة رقم 9
Using Plasma P1’s as Floor Monitors · The Plasma P1 is perfect for use as a powered floor monitor. + # $( ! # # $ # Plasma P1 Rigging · The Plasma P1 has an L-track embedded into the top and side of the enclosure to provide convenient multi axis suspension and attachment points for an optional suspension arm or L-track stud fitting. The very compact multi-angle enclosure can be suspended or arrayed. The L-Track also accepts double-stud locking swivel
ملخص المحتوى في الصفحة رقم 10
Suspending Plasma P1 Speaker Systems P1 enclosures have L-track located on the top, bottom, and on one side. Single or double stud ring fittings can be attached to the L-track to be used as suspension points. These points are located at the center of gravity to allow the system to hang straight when used either vertically, or horizontally. Plasma P1 is NOT designed to be suspended vertically from one another. More than one system should never be suspended from a single point! Working load l
ملخص المحتوى في الصفحة رقم 11
Specifications Plasma P1 Plasma P2 Fz req. Response (-3 dB): 45 Hz - 17 kH Fz req. Response (-3 dB): 40 Hz - 100 H 1 1 Freq. Range (-10 dB):z 38 Hz - 19 kH Freq. Range (-10 dB):z 30 Hz - 110 H CB alculated Max SPL: 132 d CB alculated Max SPL: 132 d H° orizontal Coverage: 80 AH mplifier Design: Class V° ertical Coverage: 55 T% HD: < 0.05 AH mplifier Design: Class IK nput Impedance: 20 Ω T% HD: < 0.01 A) mplifier Power: 550 W RMS (800W Peak IK nput Impedance: 20 Ω Lz ow-Pass Crossover: 100 H L) F
ملخص المحتوى في الصفحة رقم 12
Dimensions (Plasma P2 Subwoofer) Top View Front View Side View Plasma P2 Subwoofer
ملخص المحتوى في الصفحة رقم 13
Block Diagrams Plasma P1 Plasma P2
ملخص المحتوى في الصفحة رقم 14
Notes
ملخص المحتوى في الصفحة رقم 15
Notes
ملخص المحتوى في الصفحة رقم 16
! " ## $ %
&
'
(
)
*
$# $$
+ ,+
$$!*-. ( /0 1&
!" #$$%&'#() & *
