ملخص المحتوى في الصفحة رقم 1
4.8V Cordless Screwdriver
68394 4.8V Cordless Screwdriver
Read this material before using this product.
Failure to do so can result in serious injury.
Save this manual.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
© ®
Copyright 2011 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herei
ملخص المحتوى في الصفحة رقم 2
Specifications Adapter Input 120 V~ / 60 Hz DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. Motor Speed 0-180 RPM Chuck 1/4”, Magnetic Max. Torque 45 inch-lbs. WARNING indicates a hazardous situation which, if Charging Time 5-7 Hours not avoided, could result in death or serious injury. Battery Type 4.8V, Ni-Cd; 600 mAh CAUTION, used with the safety alert symbol, Save This Manual indicates a hazardous situation which, if not Keep this ma
ملخص المحتوى في الصفحة رقم 3
3. Personal safety to operate the power tool. Power tools are dangerous in the hands of untrained users. a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do e. Maintain power tools. Check for misalignment not use a power tool while you are tired or under or binding of moving parts, breakage of parts the influence of drugs, alcohol or medication. and any other condition that may affect the A moment of inattention while operating power power tool’s
ملخص المحتوى في الصفحة رقم 4
6. Do not leave the tool unattended when it is plugged Vibration Safety into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. This tool vibrates during use. Repeated or long-term exposure to vibration may cause 7. This product is not a toy. Keep it temporary or permanent physical injury, out of reach of children. particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: 8. People with pacemakers shou
ملخص المحتوى في الصفحة رقم 5
Symbology Grounding Double Insulated TO PREVENT ELECTRIC SHOCK AND Canadian Standards Association DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified Underwriters Laboratories, Inc. electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove Volts Alternating Current V~ the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, Amp
ملخص المحتوى في الصفحة رقم 6
Instructions for Putting into Use Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and disconnect Power Adapter before assembling or making any adjustments to the tool. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram
ملخص المحتوى في الصفحة رقم 7
5. Squeeze and hold down the top Forward Trigger to Operating Instructions start clockwise rotation. For reverse (counterclockwise) rotation, squeeze the bottom Reverse Trigger. Read the ENTIRE IMPORTANT SAFETY 6. When finished using the Screwdriver, release the INFORMATION section at the beginning Forward / Reverse Trigger to turn off the tool. of this manual including all text under subheadings therein before 7. Clean then store the Screwdriver indoors set up or use of this product.
ملخص المحتوى في الصفحة رقم 8
Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. No power at outlet during 1. Check power at outlet. If outlet is unpowered, charging. turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads. 2. Internal damage or 2. Have technician service tool. wear. (Carbon brushes or switch, for example.) Performance Carbon brushes worn or damaged. Have qualified technician replace brus
ملخص المحتوى في الصفحة رقم 9
Parts List and Assembly Diagram Assembly Diagram 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 22 34 32 33 23 24 25 26 27 28 29 30 31 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 68394 For technical questions, please call 1-800-444-3353. Page 9
ملخص المحتوى في الصفحة رقم 10
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installatio
