ملخص المحتوى في الصفحة رقم 1
FS-C8008N
FS-C8008N
FS-C8008N
FS-C8008DN
Color Laser Printer
Operation Guide
ملخص المحتوى في الصفحة رقم 2
Cautions • To prevent the printer from tipping over, the optional CA-31B caster kit must be installed when the printer is installed with more than one paper feeder or a duplex unit. For detailed information on the CA-31B caster kit, see page A-11. • Do not block the cooling air in and out vents and the exhaust duct against walls or with other objects. If the flow of cooling air is blocked, heat will be built up in the printer, and there will be a risk of fire. Note Moisture condensation inside
ملخص المحتوى في الصفحة رقم 3
Please read the Operation Guide before using the printer. Keep it close to the printer for easy reference. The sections of this guide and parts of the printer marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the printer. The symbols and their meanings are indicated below. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance wit
ملخص المحتوى في الصفحة رقم 4
Caution NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION. Notice on Software SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer is factory-set to emulate the PCL. The emulation mode can be changed by following the procedures described in Chapter 3. Notice The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or
ملخص المحتوى في الصفحة رقم 5
IBM PROGRAM LICENSE AGREEMENT THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS ("PRO- GRAMS") WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM"). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE DEVICE WI
ملخص المحتوى في الصفحة رقم 6
Agfa Monotype License Agreement 1) "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software. 2) You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Agfa Japan. Und
ملخص المحتوى في الصفحة رقم 7
FCC statement (for users in the United States) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including inter- ference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to p
ملخص المحتوى في الصفحة رقم 8
Important Notes for Interface connectors Be sure to power off the printer before connecting or disconnecting an interface cable. For protection against static electricity discharge to the printer's internal electronics through the interface connector(s), cover any interface connec- tor that is not in use with the protective cap supplied. Use shielded interface cables. Safety information Laser safety: This printer is certified as a Class 1 laser product under the U.S. Department of Health and Hu
ملخص المحتوى في الصفحة رقم 9
U.S. CDRH regulations The Center of Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured on and after August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States. Ozone concentration The printers generate o
ملخص المحتوى في الصفحة رقم 10
Declaration of Conformity for U.S.A. Model name: Color Laser Printer FS-C8008N Trade name: Kyocera Mita Responsible party: Kyocera Mita America, Inc. Address: 225 Sand Road PO Box 40008 Fairfield, New Jersey 07004-0008, U.S.A. Telephone: (973) 808-8444 Fax: (973) 882-6000 Contact person for technical matter: Ryozo Kojima Phone: (973)-882-6019 Manufacturer: Kyocera Mita Corporation Tamaki Plant Manufacturer’s address: 704-19, Nojino, Tamaki-cho, Watarai-gun, Mie-ken 519-0497, Japan This device c
ملخص المحتوى في الصفحة رقم 11
Declaration of Conformity for Australia Manufacturer: Kyocera Mita Corporation Tamaki Plant Manufacturer’s address: 704-19, Nojino, Tamaki-cho, Watarai-gun, Mie-ken 519-0497, Japan declares that the product Product name: Color Laser Printer Model name: FS-C8008N Description of devices: This Page Printer Model FS-C8008N is the 31 ppm (monochrome)/8 ppm (color), A4 size and utilized plane paper; laser; dry toner; etc. The printer can be equipped with several enhancement optional units as a
ملخص المحتوى في الصفحة رقم 12
® ENERGY STAR As an ENERGY STAR Partner, we have determined that this product meets the ENERGY STAR guidelines for energy efficiency. The basic objective of the ENERGY STAR Program is to reduce environmental pollution by encouraging the manufacture and sale of equipment that uses energy more efficiently. This printer is equipped with a sleep timer function that conforms with the standards of the ENERGY STAR Program. This function makes it possible to reduce the amount of electrical power cons
ملخص المحتوى في الصفحة رقم 13
Installation Precautions Environment CAUTION • Avoid placing the printer on or in locations which are unstable or not level. Such locations may cause the printer to fall down or fall over. This type of situation presents a danger of personal injury or damage to the printer. ....................................................................................... • Avoid locations with humidity or dust and dirt. If dust or dirt becomes attached to the power plug, clean the plug to avoid the
ملخص المحتوى في الصفحة رقم 14
Power Supply/Grounding the Printer WARNING • DO NOT use a power supply with a voltage other than that specified. Avoid multiple connec- tions in the same outlet. These types of situations present a danger of fire or electrical shock... • Plug the power cord securely into the outlet. If metallic objects come in contact with the prongs on the plug, it may cause a fire or electric shock. ............................................................... • Always connect the printer to an outlet with
ملخص المحتوى في الصفحة رقم 15
Precautions for Use Cautions when Using the Printer WARNING • DO NOT place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near the printer. This type of situation presents a danger of fire or electrical shock should they fall inside. ............................................................................................................. • DO NOT remove any of the covers from the printer as there is a danger of electrical shock from high voltag
ملخص المحتوى في الصفحة رقم 16
Other Precautions • DO NOT place heavy objects on the printer or cause other damage to the printer. • DO NOT open the front cover, turn off the main switch, or pull out the power plug during printing. • During printing, some ozone is released, but the amount does not cause any ill effect to one's health. If, however, the printer is used over a long period of time in a poorly ventilated room or when printing an extremely large number of copies, the smell may become unpleasant. To maintain the
ملخص المحتوى في الصفحة رقم 17
For More Information... Item Description Installation Guide Describes procedures from printer setup to printing a test page. (paper manual) Quick Reference Guide Describes common information about the printer such as load- (paper manual) ing paper, understanding messages, etc. This guide can be retained in the plastic pocket at the printer. The following documents are stored in the CD-ROM as PDF documents. Operation Guide (this manual) Guides you through topics concerning the operations and m
ملخص المحتوى في الصفحة رقم 18
Guide to the Operation Guide This Operation Guide has the following chapters: Chapter 1 Introduction This chapter explains printer features and the names of parts. Chapter 2 Handling Paper This chapter explains the types of paper that can be used with the printer. Chapter 3 Using the Operator Panel This chapter explains the message display, indicators and keys on the operator panel, and how to make various settings from the operator panel. Chapter 4 Troubleshooting This chapter explains how to
ملخص المحتوى في الصفحة رقم 19
Contents Contents Chapter 1 Introduction 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.1.2 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.1.3 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.1.4 Ne
ملخص المحتوى في الصفحة رقم 20
Contents 3.6.3 Alternative Emulation for KPDL Emulation . . . . . . . . . . . . . . . . . . . . 3-44 3.6.4 Printing KPDL Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45 3.6.5 Default Font . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46 3.7 Pagination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53 3.7.1 Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . .
