Xerox 230ST دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

The Document Company
XEROX
®
DC220/230ST Windows NT 4.0 NetBIOS/IP Quick Install
b) IP Address setup (skip this step if
Installation Requirements:
1. Connect the DC220/230 to your network
using RARP): Press [IP Address],
outlet or cable.
then press [Edit] and use the key-
To install the DC220/230 into a DHCP environ-
board on the display screen to enter
ment, exclude the addresses assigned to the
2. Enter System Administration Setups:
the static IP address for the DC220/
DC220/230 at the D

ملخص المحتوى في الصفحة رقم 2

The Document Company XEROX ® DC220/230ST Windows NT 4.0 NetBIOS/IP Quick Install h) Press [Broadcast Address], then 6. Enter the Host Name: 10. Press [Exit]. The DC220/230 will reboot press [Edit] and use the keyboard on and print a configuration sheet in approxi- a) Press [Host Name], then press [Edit] the screen to enter the Broadcast mately 3 minutes. and use the keyboard on the screen to Address you want your DC220/230 to enter the Host Name for your network use. 11. Check the sett