Dukane 2223A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Sunspalsh Overhead Projector
2000/2200 Lumen Model SP2123A/2223A
Operator’s Manual
IMPORTANT SAFETY INSTRUCTIONS
– Important! –
Immediately Check for Loose Lamps
When using your overhead projector, basic safety precau-
Open top stage by pressing the release tab located on tions should always be followed, including the following:
the mast side of the stage. Check to see that the lamps
are fully inserted into the socket and correctly aligned.
1. Read and understand all instructions before using.

ملخص المحتوى في الصفحة رقم 2

Trouble Shooting Symptom Probable Cause Solution Neither lamp or a. Unit unplugged a. Plug unit into fan operate outlet b. No power at wall outlet b. Verify outlet has power c. Stage not closed c. Close stage d. Stage installed backwards d. Install stage correctly e. Damaged part e. Obtain service No lamp, fan runs a. Burned-out lamp a. Replace lamp b. Lamp changer not engaged b. Slide changer arm into position c. Lamp not seated in receptacle c. Seat lamp New lamp installed, a. Defective lamp a