InFocus SP-CEIL-008 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Hardware description

The Digital Projector Mount utilizes the following hardware. Note that the letters associated with the hardware
on this list correspond to the letters listed in the instructions for each installation method.



A. Four (4) 4 (mm) x 10 (mm) Phillips head screws (supplied)

27700B S.W. Parkway Ave.
Wilsonville, Oregon 97070-9215

1-800-294-6400

www.infocus.com

SP-CEIL-008 DIGITAL PROJECTOR MOUNT
B. One (1) mounting bracket (supplied)

Installation Ins

ملخص المحتوى في الصفحة رقم 2

Tools Needed for Installing the Digital Projector Mount Getting the projector ready You need the following tools to install the Digital Projector Mount: Before you start the installation process, prepare your Digital Projector by performing the following steps (FIGURE 1). • Phillips head screwdriver (not included) 1. Turn the projector (C) upside down and place it on a clean flat surface, preferably on a towel. • Allen wrench (included) 2. Locate the mounting bracket (B) and align

ملخص المحتوى في الصفحة رقم 3

Wood stud FIGURE 2 E Adjustable Height Ceiling Installation Ceiling st ructure Center of wood stud Complete the following steps to install the projector mount and projector on your ceiling with the optional suspension adapter. This installation works best with high ceilings (FIGURE 3). D Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector mount with the arrow pointing toward your screen. 6. Use the Allen wrench (F)

ملخص المحتوى في الصفحة رقم 4

SEE F FIGURE IGURE 3 3 Wood stud E Ceiling plate Remove Remove Remove Ceiling structure f f fr r rom mount om mount om mount Center of wood stud assembl assembl assembly y y Remove Remove Remove Adjustable screws D f f fr r rom mount om mount om mount Optional assembl assembl assembly y y SP-LTMT-EXTP-S extension adapter Ceiling plate C Insert and rotate 180° and lock down Mount assembly B A Replace t Replace t

ملخص المحتوى في الصفحة رقم 5

Wall Mount Installation Complete the following steps to install the projector mount and projector to your wall. (FIGURE 4) Wall wood stud Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector mount with the arrow pointing toward your screen. Top plate NOTE: Follow step 3 to secure the extension to the mount assembly. 15. Secure the upper plate to the wall using the commercially available hardware (E) suitable for your Wall stru