ملخص المحتوى في الصفحة رقم 1
LCD PROJECTOR
MODEL
WL6700U
WL6700LU
User Manual
WL6700
This User Manual is important to you.
Please read it before using your projector.
ملخص المحتوى في الصفحة رقم 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock. The exclamation point within an eq
ملخص المحتوى في الصفحة رقم 3
Contents Important safeguards ........................................................................................................................4 Preparing your projector ....................................................................................................................6 Using the remote control ...................................................................................................................9 Setting up your projector .....................................
ملخص المحتوى في الصفحة رقم 4
Important safeguards Please read all these instructions regarding your 10. Power sources projector and retain them for future reference. Follow This projector should be operated only from the all warnings and instructions marked on the projector. type of power source indicated on the marking label. If you are not sure of the type of power, 1. Read instructions please consult your appliance dealer or local All the safety and operating instructions should be power company. read before the ap
ملخص المحتوى في الصفحة رقم 5
Important safeguards (continued) temperature inside of the projector may rise and cause WARNING: some troubles, such as damage of inside parts, and Unplug immediately if there is something shortening the life of panel. wrong with your projector. Do not look into the air outlet grille when Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fi re or electric shock. projector is operating. In this case, unplug immediately and contact your dealer. Heat, du
ملخص المحتوى في الصفحة رقم 6
Preparing your projector Checking accessories The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package. Cables Power supply parts Mini D-SUB D-SUB 15-pin 9-pin Mini D-SUB D-SUB 15-pin 9-pin RS-232C cable Audio/Video cable RGB cable for PC Power cord (two) (246C381-10) (246C597-10) (246C598-10) (246C483-10, 246C383-20) • Used for projector control by computer. Remote control parts Terminal cover parts Others • Lens ca
ملخص المحتوى في الصفحة رقم 7
Preparating your projector (continued) Overview 1 Remote control sensor (Front) 1 2 3 2 Lens 3 Control area 4 Easy-carry handle 5 Air inlet grille 6 Terminal board 7 Air outlet grille 4 5 6 7 8 Speaker 8 9 Remote control sensor (Rear) 10 Kensington Security Lock Standard connector 9 10 Control area 1 POWER button 7 1 2 AUTO POSITION/ button 8 3 COMPUTER/ button 4 VOLUME/ button 2 5 MENU button 6 ZOOM/FOCUS button 9 3 7 STATUS indicator 4 10 8 POWER indicator 9 VIDEO/ button 5 10 ENTER/KEYSTO
ملخص المحتوى في الصفحة رقم 8
Preparating your projector (continued) Bottom side 1 1 Adjustment feet 2 Air inlet grille/Filter cover 3 Lamp cover Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot 2 and it may cause burns. 3 Remote control 1 Laser aperture 2 Transmission window 1 3 Wired remote control jack 4 Indicator 5 POWER button 2 3 6 VIDEO button 7 DVI-D(HDCP) button 8 HOME button 4 9 END button 10 Page Up and Page Down buttons 5 11 Mouse pointer COMPUTER 18
ملخص المحتوى في الصفحة رقم 9
Using the remote control Operational range of the remote control Front of projector Rear of projector 30° 30° 30° 30° Operate the remote control within a distance of 10 m (30 feet) from the projector, pointing the light beam at the remote control photo- sensor (front or rear) of the projector. • Keep the remote control photo-sensor out of direct When operating the remote control, keep the distance sunlight or fl uorescent lamp light. from the remote control to the projector via the • Keep
ملخص المحتوى في الصفحة رقم 10
Setting up your projector Setting up the screen Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector. (See page 11.) • Install the screen and projector so that the projector’s lens is placed at the same height and horizontal position of the screen center. • Do not install the screen where it is exposed to direct sunlight or lighting. Light directly refl ecting on the screen makes the projected image
ملخص المحتوى في الصفحة رقم 11
Setting up your projector (continued) LENS SHIFT button To adjust the positions of the projector and the screen, use LENS SHIFT button. 1. Press the LENS SHIFT button. LENS SHIFT • The LENS SHIFT menu appears at the center of the screen. FAST 2. Press the , , or button to move the image position. SELECT : ENTER • When the button is pressed, the image moves down. • When the button is pressed, the image moves up. • When the button is pressed, the image moves to the right. • When the button
ملخص المحتوى في الصفحة رقم 12
Setting up your projector (continued) Front projection, ceiling mounting Rear projection For ceiling mounting, you need the ceiling mount kit Ask a specialist for installation. For details, consult designed for this projector. Ask a specialist for installa- your dealer. tion. For details, consult your dealer. • The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location. • Fo
ملخص المحتوى في الصفحة رقم 13
Viewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer are turned off. • When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor. Computer For analog connection: (For using the COMPUTER/COMPONENT VIDEO IN 2 COMPUTER/ terminal.) COMPONENT 1 VIDEO IN 2 1. Connect one end of the supplied RGB cable to the COMPUTER/COMPONENT VIDEO IN 2 terminal of t
ملخص المحتوى في الصفحة رقم 14
Viewing computer images (continued) For monitor connection: 1. Connect the RGB cable from the monitor to the MONITOR OUT terminal of the projector. Monitor 1 MONITOR OUT RGB cable For audio output connection: 1. Connect one end of a commercially available audio cable to the AUDIO OUT terminal of the projector. 2. Connect the other end (white and red) of the audio cable to the audio input terminals (L, R) of the audio equipment. To audio input • When the audio cable is connected to the A
ملخص المحتوى في الصفحة رقم 15
Viewing computer images (continued) C. Projecting images Preparation: • Remove the lens cap. COMPUTER 1, 2 buttons POWER button POWER button DVI-D(HDCP) button COMPUTER button LENS SHIFT button ZOOM/FOCUS button ZOOM/FOCUS button Main power switch LENS SHIFT button 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, the fan may start rotating and th
ملخص المحتوى في الصفحة رقم 16
Viewing computer images (continued) Important: • Focus, zoom and lens shift adjustment is possible in the normal picture mode only. To stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press any button except the POWER button. 14. Press the POWER button again. • The lamp goes out and the projector goes into a standby mode. In this standby mode, the STATUS indicator blinks green. 15. Wait about 2
ملخص المحتوى في الصفحة رقم 17
Viewing computer images (continued) Setting the aspect ratio You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the screen to be used or your preference. How to change the settings: With the remote control: 1. Press the ASPECT button. • Every time the ASPECT button is pressed, the aspect mode changes from AUTO (FULL) to AUTO (16:10), to AUTO (16:9), to AUTO (4:3), to 16:9, to REAL, to FULL, and
ملخص المحتوى في الصفحة رقم 18
Viewing video images A. Connecting the projector to video equipment Preparation: • Make sure that the power of the projector and that of the video equipment are turned off. Connecting to a video player, etc. Video player, or the like 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO IN terminal of the projector. 2. Connect one end (white and red) of the supplied audio/ To audio output 3 video cable to the audio input terminals (L/MONO, R) of the terminals To video
ملخص المحتوى في الصفحة رقم 19
Viewing video images (continued) Projector + DVD player or HDTV decoder Some DVD players have an output connector for 3-line fi tting (Y, CB, CR). When connecting such DVD player with this projector, use the COMPUTER/COMPONENT VIDEO IN 1 terminals. BNC cable (option) G R B COMPUTER/COMPONENT VIDEO IN 1 BNC-RCA connector (option) Y C CB(PB) R(PR) AUDIO IN 1 Audio cable (option) DVD player or HDTV decoder To audio output terminals • The terminal’s names Y, PB, and PR are given as examples of w
ملخص المحتوى في الصفحة رقم 20
Viewing video images (continued) Connection (for video equipment having a DVI-D terminal) Audio cable (option) Equipment having a To audio output To audio input DVI-D terminal terminals terminals To DVI-D terminal COMPUTER/COMPONENT VIDEO DVI-D (HDCP) DVI cable (option) • For connection to the DVI-D terminal, use a commercially available DVI cable. • Some cables may not be connected correctly depending on the size and shape of their connectors. • When DVI is selected as the input source, set
