ملخص المحتوى في الصفحة رقم 1
OWNER’S MANUAL
DATA PROJECTOR
TDP-TW95
TDP-TW100
Others Maintenance Operations Preparations Before Using
ملخص المحتوى في الصفحة رقم 2
Before Using SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND 5. Heat 8. Power-Cord Protection INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE The product should be situated Power-supply cords should be MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE away from heat sources such as routed so that they are not likely to REFERENCE. radiators, heat registers, stoves, or be walked on or pinched by items other products (including placed upon or against them, This unit is fully
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) e) If the product has been dropped or 10. Lightning storms 12. Do not place the product 15. Accessories damaged in any way (If the cabinet For added protection for this vertically Do not place this product on an should break, please handle with product during storm, or when it is unstable cart, stand, tripod, Do not use the product in the care to avoid injury) . left unattended and unused for bracket, or table. The product may upright position to proje
ملخص المحتوى في الصفحة رقم 5
IMPORTANT SAFETY INSTRUCTIONS (Continued) POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. 19. Replacement Parts 22. Do not use the product in When replacement parts are a closed installation state. Plug Plug required, be sure the service Do not place the product in a box configuration Plug type Line voltage configuration Plug type Line voltage technician has used replacement or in any other closed installation Australian 200 – 240V parts
ملخص المحتوى في الصفحة رقم 6
IMPORTANT PRECAUTIONS (Continued) Avoid Volatile Liquid Disposal Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or This product contains substances which are harmful to humans and the environment. plastic products touching the unit for a long time. They will leave marks on the finish. • The lamp contains mercury. If cleaning with a chemically saturated cloth, be sure to follow the product's precautions. Please dispose of this product or used lamps in
ملخص المحتوى في الصفحة رقم 7
CONTENTS Setting Wireless Utility .................................................................................... 49 Before Using Computer settings .......................................................................................... 53 SAFETY PRECAUTIONS .................................................................................. 2 Projecting images stored in a USB memory ...................................................... 54 IMPORTANT SAFETY INSTRUCTIONS ....................
ملخص المحتوى في الصفحة رقم 8
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. (5) (4) (3) (2)(1) If any item is missing, please contact the store immediately where you purchased the product. (1) (5) (8) (6) (9) (2) (7) (4) (6)(7) (8) (9) (10) (11) (12) (11)(13) (14) (3) Back Front (4) (See note) ■■ (1) Remote control ■■ (6) Power cord Name : Function ■■ (2) LR03 (SIZE AAA) batteries for remote ■■ (
ملخص المحتوى في الصفحة رقم 9
Names of each part on the control panel and remote control Name : Main Function Control panel Remote Control (7) ZOOM button : Adjusts the screen size. (12) (13) (14) (9) INPUT button : Selects input. p.26 Remote control Laser light (10) RETURN button : Goes back one screen. transmitter source (11) Selection button : Menu selections and adjustments, volume control, etc. (17) p.35 (1) (6) (4) (11) (16) (15) LASER button : Shows a laser pointer. (3) (9) (10) (2) (15) (2) (16)AUTO SET button : Se
ملخص المحتوى في الصفحة رقم 10
Approx. 5m Names of the terminals on the rear panel Preparing and using the remote control (1) (2) (3) (4) (5) (6) (7) ■ Loading dry-cell batteries ■ Operating the remote into the remote control control q Remove the battery cover. Turn on the ON/OFF switch of the remote control. Point toward the projector’s infrared remote sensor, and press a button on the remote control. • Operating the projector from the front w Insert the dry-cell batteries. Be sure to align the plus and minus Approx. 15° end
ملخص المحتوى في الصفحة رقم 11
Operating a computer using the remote control Placement A computer can be operated using the projector’s remote control. This function is available Placement Styles ® ® ® on any computer with the Windows 98/98SE, Windows Me, Windows 2000, or Win- As shown in the figures below, this device can be placed in 4 different styles. ® dows XP OS, that is equipped with a USB port which can support USB1.1 (The mouse The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the
ملخص المحتوى في الصفحة رقم 12
Connection Notes Before connection • The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal. • Read the owner’s manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. • The MONITOR OUT terminal outputs signals from the COMPUTER 1 IN terminal or the p.87 COMPUTER 2 IN terminal, or outputs Y/PB/PR as selected with the INPUT button. If no Check for an RGB output terminal, supported signal , etc. •Turn
ملخص المحتوى في الصفحة رقم 13
Operations Turning the power on and off Notes ■ Connecting the power cord • The start-up screen will disappear after a moment. You can dismiss the start-up screen Insert the power cord connector into 1 before this by performing any operation. You can also configure the start-up screen not to the AC IN socket of the projector. p.38 appear via the Display setting menu . • The first time you use the projector after purchase, after the start-up screen disappears, Insert the power cord plug into a 2
ملخص المحتوى في الصفحة رقم 14
Basic operations Turn on the power. 5 Projector placement angle adjustments 1 p.24 Turn on the power by following the instructions in “Turning the power on” . The placement angle and the height of the projected image can be adjusted by the foot The Easy setup function works to automatically adjust the screen focus and correct the adjuster. keystone distortion. If RGB signals are input, auto-setting is also made. This operation 1 q Lift up the front of the projector to p.41 does not take place wh
ملخص المحتوى في الصفحة رقم 15
Using handy features ■ Easy setup ■ Using auto setting (Only for input from computer) Remote This function automatically adjusts the screen focus and corrects the keystone distor- This function automatically adjusts the projector settings such as Control tion (Auto focus and Auto keystone functions). sampling phase, frequency, screen position, and clamp for each type of the input signal by using simple operations. Remote Press the EASY SETUP button on the Control panel Control Press the remote c
ملخص المحتوى في الصفحة رقم 16
Using handy features (Continued) Adjusting Keystone distortion [Auto] 3 To move the area to zoom in, use the buttons. 2 Press the button. You can keep pressing. The keystone distortion is automatically corrected. The icon appears during this correction. When adjustment is finished, the Keystone menu appears again. For fine adjust- ment, select [V-keystone] by the button and adjust image manually by the 4 To reset the zoom, press the RETURN button. buttons. The image is reset to the orig
ملخص المحتوى في الصفحة رقم 17
Using handy features (Continued) ■ Changing screen size ■ Password function Remote The screen size for the projected image can be changed. When the password function is added and [Password] is set to [On], image projection Control requires an entry of the preset password at power-on. Press the remote control’s SCREEN SIZE button. To add the password function, perform the following procedure: Pressing the button switches Full/Thru/Wide in turn. (The password function, once added, cannot be delete
ملخص المحتوى في الصفحة رقم 18
Using handy features (Continued) Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using How to cancel password (from [On] to [Off]) p.16 the operation buttons on the control panel (main unit side) and remote control. 1 Select [Password] in the Default setting menu and press the or button. ■ How to use the menus The password entry screen is displayed. The menu shown below is for operation instructions purposes and might differ from the actual di
ملخص المحتوى في الصفحة رقم 19
Using the menus (Continued) ■ The image adjustment menu Wireless/ Item Description Computer Y/PB/PR Video S-video USB Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, Position Frequency Yes No NoNo No it indicates that you cannot select for the current input.) Adjust to eliminate periodic patterns and flickering when many fine vertical lines appear on the screen. Wir
ملخص المحتوى في الصفحة رقم 20
Using the menus (Continued) Note ■ The display setting menu • If you use the screen size setting function on commercial video software, Use this menu to set screen display-related items. (The items in gray color cannot be set with the current input selection.) broadcast or cable-broadcasting programs to display images with the varying aspect ratio except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. Description Item Screen s
