ملخص المحتوى في الصفحة رقم 1
L I G H T A M P ™ D L P ™ P R O J E C T O R
Version 1.1
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Introduction ......................................................................................................................... 2 Warnings & Safety Precautions ......................................................................................... 3 Two Year Limited Warranty .............................................................................................. 5 Projector Rear Panel Description ...................................................................
ملخص المحتوى في الصفحة رقم 3
INTRODUCTION » Introduction to the Vidikron Vision Model 100 LIGHTAMP™ DLP™ Projector Vidikron’s new flagship Vision™ Model 100 has been specifically engineered to produce high performance video in the kinds of environments most people use to enjoy their entertainment - family rooms, great rooms and living rooms. Most high-end video projectors are intended for use in dedicated home theater environments with controlled lighting. However, many people prefer to have their entertainment systems in
ملخص المحتوى في الصفحة رقم 4
WARNINGS & SAFETY PRECAUTIONS WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. CAUTION: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT REMOVE COVER. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE
ملخص المحتوى في الصفحة رقم 5
WARNINGS & SAFETY PRECAUTIONS DECLARATION OF CONFORMITY VIDIKRON PROJECTOR, MODEL 100 This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING Some IC chips in this product include confidential and/or trade secret property belonging to Texas Instruments. Therefore you may n
ملخص المحتوى في الصفحة رقم 6
LIMITED WARRANTY TWO YEAR LIMITED WARRANTY For Projectors, Video Processors and Controllers Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup and care, you should enjoy many years of unparalleled video performance. This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other important documents. WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRA
ملخص المحتوى في الصفحة رقم 7
LIMITED WARRANTY EFFECTIVE WARRANTY DATE: This Limited Warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORTANT: WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified. CONTACT A VIDIKRON AUTHORIZED SERVICE CENT
ملخص المحتوى في الصفحة رقم 8
PROJECTOR REAR PANEL INPUTS 1 2 3 4 5 6 7 8 ���������� � � ���������������� ������� � LAMP COVER 9 10 11 12 13 14 15 16 17 18 19 1. DVI 1 (Digital) DVI input #1, HDCP compliant. DVI 2 (Digital) DVI input #2, HDCP compliant. 2. COMPONENT VIDEO (RCA connectors) Standard Definition (480i/576i) Component (YPrPb) input. This is the input for component video from sources such as DVD players. (For best results do not run DVD player in progressive mode). 3. HD 1 (Analog BNC connectors) High Def
ملخص المحتوى في الصفحة رقم 9
PROJECTOR REAR PANEL INPUTS 7. IR Wired input from an external remote control. 8. RS-232 CONTROL Connection for an external RS-232 controller device to place the Projector under system automation control. 9. VACUUM FLORESCENT DISPLAY Reads out all relevant status information of the Projector at all times. Can be used instead of the On Screen Display. Indicates the model number, current source, scan rate (resolution) and aspect ratio. 10. UP BUTTON Use to direct select aspect ratios or
ملخص المحتوى في الصفحة رقم 10
REMOTE CONTROL DESCRIPTION 1. IR OUTPUT INDICATOR Illuminates when a button in pressed, indicating that an IR signal is being transmitted. ����� 1 2 2. LIGHT BUTTON 3 Illuminates the remote backlight for improved night ��� �� visibility. 4 3. OFF and ON BUTTON Switches the projector ON and OFF. (These do not operate ���� when POWER/STANDBY indicator of the main unit 5 is off.) ��� ���� ��� 6 7 4. CODE BUTTON ����� � For Service use only. ��� ��� ���� ���� 8 �� �� � 10 � � 5. CU
ملخص المحتوى في الصفحة رقم 11
REMOTE CONTROL DESCRIPTION MEMORY SETTINGS BUTTONS Four video preset memory setting buttons are available: 8. ISF NT – ISF Night 9. ISF DAY – ISF Day 10. CUST 1 – Custom One 11. CUST 2 – Custom Two SOURCE SELECTION BUTTONS Direct source selection buttons: These will enable direct access to desired inputs, or selection of a number in certain cases. These buttons are: 12. VIDEO BUTTON Press this button to select VIDEO (composite video) as the source. 13. S-VID 1 (S-VIDEO 1) and S-VID 2 (S-VIDEO
ملخص المحتوى في الصفحة رقم 12
QUICK CONNECTION AND SETUP GUIDE While there are many different ways to connect your source equipment to your Vidikron Projector, the examples below are the most common. ANALOG INPUTS: • Composite Video Input Composite video is the most common type of signal used, but is also the lowest in picture quality. Many sources have outputs that are limited to composite video, such as some VCR’s and camcorders; others such as Laser Disc players actually produce slightly better results when using compo
ملخص المحتوى في الصفحة رقم 13
QUICK CONNECTION AND SETUP GUIDE Follow the steps below ensure proper installation of the Vision Model 100 projector. NOTE: These steps should be performed by a qualified custom video installation specialist. Step I Connection: 1. Connect Power to the Projector. 2. Connect Video (Composite), S-Video to 1 or 2, Component 480i (RCA) input, HD signals to HD1 or HD2 (BNC), DVI 3. Turn ON the system from the projector control panel and main power switch. Step II 1. Press Menu to select Main window.
ملخص المحتوى في الصفحة رقم 14
HOW TO INSTALL OR REMOVE THE PROJECTOR LAMP IMPORTANT NOTE: LAMP INSTALLATION OR REMOVAL SHOULD ONLY BE PERFORMED BY AN AUTHORIZED VIDIKRON SYSTEM INSTALLER OR TECHNICIAN. Step One: INSURE PROJECTOR AC POWER IS OFF AND POWER CORD IS REMOVED PRIOR TO INSTALLING OR REMVOING THE LAMP ASSEMBLY. Step Two: Loosen the four rear Lamp Cover screws; remove cover: Lamp Cover Screws Step Three: Remove the two lamp assembly mounting screws: Lamp Assembly Screws 13
ملخص المحتوى في الصفحة رقم 15
HOW TO INSTALL OR REMOVE THE PROJECTOR LAMP Next, grasp the lamp assembly handle and pull gently, removing the lamp module out of the projector housing. Lamp Assembly Handle Step Four: Replace lamp module and replace, retighten all screws. Lamp Cover Screws 14
ملخص المحتوى في الصفحة رقم 16
LENS SHIFT RANGE Example: 56” x 100” Screen Lens Option 1: Throw Distance 1.2 - 1.4 x Width of Screen TD = 120” to 140” lens to screen When only Vertical or only Horizontal Shift is used: 0.24 X 56” = 13.44” up or down Maximum. Vertical Shift ↑ = 60% of screen height (.60 x height) 0.10 X 100” = 10.0” left or right Maximum. Vertical Shift ↓ = 24% of screen height (.24 x height) Maximum Horizontal Shift = 10% of screen width (.10 x width) Amount of Horizontal Shift when Vertical is @ maximum: 0
ملخص المحتوى في الصفحة رقم 17
LENS SHIFT RANGE Example: 56” x 100” Screen Lens Option 4: Throw Distance 2.35 - 3.60 x Width of Screen TD = 235” to 360” lens to screen When only Vertical or only Horizontal Shift is used: 0.24 X 56” = 13.44” up or down Maximum. Vertical Shift ↑ = 60% of screen height (.60 x height) 0.16 X 100” = 16.0” left or right Maximum. Vertical Shift ↓ = 24% of screen height (.24 x height) Maximum Horizontal Shift = 16% of screen width (.16 x width) Amount of Horizontal Shift when Vertical is @ maximum
ملخص المحتوى في الصفحة رقم 18
LENS SHIFT RANGE » Example of Horizontal and Vertical Lens Shift VERTICAL LENS SHIFT (UP OR DOWN) Note: This is a general example of Vertical Lens Shift. Each lens type will vary. No particular lens was ����������� ���������� used in this example. ��������� ����������� ���������� ��������� ���������� ����������� ������������� ��������� �� ���������������������������� ����������������������������� ��������������������� HORIZONTAL LENS SHIFT (LEFT OR RIGHT) ��������������������� ��������� ���
ملخص المحتوى في الصفحة رقم 19
MENU DESCRIPTION AND NAVIGATION When the MENU button is pressed on either the remote control or the rear panel, the main menu will appear on-screen. An example of the main menu is shown to the right. The UP and DOWN buttons on the rear panel, and IR Remote Control will move the selected item on the menu. » Opening Screen • Press ENTER to access the Input Source selection menu Calibration • Press ENTER to access the Aspect Ratio selection menu > Input Source • Press ENTER to access the Picture
ملخص المحتوى في الصفحة رقم 20
MENU DESCRIPTION AND NAVIGATION Aspect Ratio provides selection of one of five aspect ratios: Anamorphic, Standard 4:3, Letterbox, IntelliWide and Cinema. To select an aspect ratio via the main menu, press either the up and down buttons on the remote or rear panel, highlight ASPECT RATIO and press ENTER. The aspect ratio menu will then appear with the four choices; highlight the desired aspect ratio with the up or down buttons and press ENTER. Otherwise, you may select an aspect ratio by pres
