ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
CONTENTS SAFETY PRECAUTIONS ................................................2 IN THE BOX ....................................................................3 RECEIVER BUTTONS ....................................................4 REMOTE CONTROL BUTTONS ...................................5 REMOTE CONTROL BUTTONS ...................................6 PREPARATION ................................................................7 PREPARATION ............................................................
ملخص المحتوى في الصفحة رقم 3
SAFETY PRECAUTIONS POWER Always use the provided AC adapter. Operate only from the power source specified AC 100-240 V,50/60Hz (6V DC , 1.5A) on the AC adapter. In using, the AC adapter get heat on the surface of the case. It is normal, not defective. Do not be covered with any material on case of AC adapter while it is in operation. Leave the 15 cm space(minimum) around the AC adapter. The rating information and safety caution of the AC adapter are on its case. LEADS Ensure the power supply lea
ملخص المحتوى في الصفحة رقم 4
IN THE BOX Thank you for buying this JVC Degital Terrestrial Set Top Box. Inside your package you should have: Degital Terrestrial Set Top Box (STB) receiver AC adaptor x1 Remote control unit: RM-C1890S Dry battery for the remote control unit AA (R06) x2 Instruction book Warranty Card Aerial cable x1 Scart cable x1 - 3 -
ملخص المحتوى في الصفحة رقم 5
RECEIVER BUTTONS Front: Standby button Program down/up buttons Back: ANTENNA ANTENNA TV DIGI TAL AUDIO OUT RS-232C DC IN (6V) OUT IN VCR/DVR (CO AXIA L) ANTENNA POWER ANTENNA RS 232 SPDIF TV VCR IN SUPPLY OUT DIGITAL SCART SCART AUDIO OUT - 4 -
ملخص المحتوى في الصفحة رقم 6
REMOTE CONTROL BUTTONS Mute Standby Number buttons Slide Switch Information button AV button Colour buttons TV/DTV button MENU button Up/Down/ Right/Left buttons OK button BACK button Text button Programme Up/Down Volume Up/Down buttons ( [P+] [P-] buttons) buttons WIDE button GUIDE button PAGE UP/DOWN buttons SUBTITLE button VCR/DVD control buttons - 5 -
ملخص المحتوى في الصفحة رقم 7
REMOTE CONTROL BUTTONS To operate this STB: Set the Slide Switch to STB position. For details of the use of each buttons, see each section’s explanation. Note: Volume-/+ buttons and the Mute button work for the volume from the TV. To operate a JVC brand TV or VCR: Set the Slide Switch to the TV/VCR position. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control. Note: Even you operating a JVC brand TV or VCR some b
ملخص المحتوى في الصفحة رقم 8
PREPARATION Connections Place your receiver on a firm, level surface with at least a 10cm gap around all sides of the case and in a position convenient for connection to your television, a mains power outlet and a TV aerial wall outlet (or the 'flying lead' from your TV aerial, as appropriate). Please refer to the Safety Precautions on page 2. Turn off your television at the mains and disconnect the lead going to the aerial wall outlet (or the flying aerial lead) and connect this to the ANTENNA
ملخص المحتوى في الصفحة رقم 9
ملخص المحتوى في الصفحة رقم 10
ملخص المحتوى في الصفحة رقم 11
ملخص المحتوى في الصفحة رقم 12
ملخص المحتوى في الصفحة رقم 13
ملخص المحتوى في الصفحة رقم 14
ملخص المحتوى في الصفحة رقم 15
Using the other two functions of the Channel List SELECT menu screen - LOCK and FAVOURITES - is dealt This function selects a channel for viewing and is with in the next sections. an alternative to using the [P+] and [P-] keys, Hint channel number or EPG. Highlight the channel to be viewed using the [LEFT] or [RIGHT] keys and press You can also enter a channel name using the [OK]. The highlighted channel now appears in the number keys on the remote control. Each key image window and you can leav
ملخص المحتوى في الصفحة رقم 16
ملخص المحتوى في الصفحة رقم 17
ملخص المحتوى في الصفحة رقم 18
ملخص المحتوى في الصفحة رقم 19
SPECIFICATION GENERAL Broad casting system DVB-T 2k & 8k Video system PAL Number of preset channels 200 Channel frequencies 47 - 858 MHz Stereo system MPEG Layer I & II 32/44.1/48kHz Power requirements DC 6V, AC adapter: 100 - 240V, 50/60 Hz Terminals U/V Input PAL type U/V Output PAL type SCART-1 (TV) RGB, Y/C, Video output and Audio output are available. SCART-2 (Aux) RGB, Y/C, Video output, Audio output and Video input are available. Digital Audio Output Coaxial RS 232C (for sevice use only)
ملخص المحتوى في الصفحة رقم 20
CONNECTING THE EXTERNAL DEVICES If your TV and VCR both have two scart sockets you can connect as follows.Unplug the aerial lead and connect this to the ANT IN socket on the rear of your receiver. Connect the aerial lead (supplied) from the LT OUT on the receiver to the ANT IN on the rear of the VCR. Then connect an aerial lead from the LT OUT on the VCR to the ANT IN socket on the rear of your TV. If your VCR has only one scart socket, connect only Scart 1 to VCR. Connect a scart lead from the
