Canon دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CapturePerfect Setup Guide
The setup disc included with the scanner contains the following software:

ISIS/TWAIN driver
This driver allows this scanner to be used with ISIS-compatible application
software or TWAIN-compatible application software. The driver must be
installed in order to be able to use the scanner.

CapturePerfect
This is a TWAIN-compatible software application. Install this application
if necessary.
This Setup Gide explains the procedure how to install the CapturePerfect.
As

ملخص المحتوى في الصفحة رقم 2

Installing CapturePerfect Follow the procedure described below to install CapturePerfect. 1. Turn on your PC. Windows starts. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional, or Windows XP, be sure to log on as a user with administrator privileges. 2. Load the setup disc in the PC’s CD-ROM drive. 3. On the Start menu, click Run. The Run dialog box appears. 4. In the Open box, type “D:\CapturePerfect\Setup.exe” (where “D” is the drive letter assigned to your CD-ROM d

ملخص المحتوى في الصفحة رقم 3

Using the CapturePerfect Follow the procedure described below to start and close CapturePerfect. Note The basic method for scanning using CapturePerfect is described in the CapturePerfect help. From the Help menu on the CapturePerfect menu bar, click Help, then refer to the explanation of how to use CapturePerfect. Starting CapturePerfect 1. Turn on the scanner. 2. Turn on your computer. Windows starts. 3. On the Start menu, point to Programs (when using Windows XP, point to All Programs) and th

ملخص المحتوى في الصفحة رقم 4

Closing CapturePerfect 1. On the File menu, click Exit. CapturePerfect closes. Note When the scanner is scanning or some operation is pending after scanning has been started (such as when scanning has been interrupted), the mouse pointer changes to an hourglass. If the mouse pointer appears as an hourglass while the scanner is not scanning, the previous scanning operation has not been completed. On the File menu, click Cancel Scanning to cancel hourglass display, then close CapturePerfect. *CE-I