ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
CONTENTS About This User’s Guide………………………………………………………………………………………iv Before You Start ……………………………………………………………………………………………….iv Packing List …………………………………………………………….………………………………………iv System Requirements …………………………………………………………………………………………v Default Settings ……………………………………………………………………………..………………...vi Introductions ………………………………………………………………………………...………7 Features and Benefits ………………………………………………………………………………..7 Camera Hardware Components ......................................................
ملخص المحتوى في الصفحة رقم 3
PLAYING VIDEO FILES ON A COMPUTER ....................................................................59 Load Saved Video Files .............................................................................................................. 60 Play Video Files...........................................................................................................................61 ffdshow .........................................................................................................
ملخص المحتوى في الصفحة رقم 4
TV-IP522P ProView Megapixel Internet Camera About This User’s Guide This user’s guide provides instructions on how to install the TV-IP522P ProView Megapixel Internet Camera and use it for camera monitoring applications. Camera monitor applications are accessible through an Ethernet local area network. Before You Start Please read and make sure you understand all the prerequisites for proper installation of your new PoE Network Camera. Have all the necessary information and
ملخص المحتوى في الصفحة رقم 5
TV-IP522P ProView Megapixel Internet Camera System Requirements Computer • CPU: o For Intel x86 compatible CPUs: Intel Pentium IV 2.0Ghz or above o For IA64 compatible CPUs: AMD Athlon 64 3000+ and above • Memory: 1GB or above • VGA Resolution: 1024 x 768 or above (Independent Display Card recommended) • 10BASE-T Ethernet or 100BASE-TX Fast Ethernet Network Interface Card • CD-ROM Drive for SetupWizard on Installation CD-ROM • IPView Pro 2.0 Application Users
ملخص المحتوى في الصفحة رقم 6
TV-IP522P ProView Megapixel Internet Camera Default Settings Use the default settings to access the web-based management software and live video display. Default configuration settings Username This is the Username you will be prompted to enter when you access the TV-IP522P configuration screens using a Web browser. The default Username is admin. This is the Password you will be prompted to enter when you access the Password configuration windows using a Web browser.
ملخص المحتوى في الصفحة رقم 7
TV-IP522P ProView Megapixel Internet Camera 1 Introduction The TV-IP522P ProView Megapixel Internet Camera transmits live real-time high-quality M-JPEG/ MPEG-4/H.264 video through an Ethernet network useful for remote monitoring applications. The live video can be viewed remotely and managed through the network from any computer connected to the network. Features and Benefits Easy to use - The Camera is a standalone system with built-in CPU, no special hardware or software i
ملخص المحتوى في الصفحة رقم 8
TV-IP522P ProView Megapixel Internet Camera Camera Hardware Components Below is a summary description of the camera hardware: Front and Side Components Adjustable focus camera lens Link/Power Audio mic LED indicator Lens comes with 2 parts that’s adjustable, Focus (front) and Aperture (back). Please adjust the aperture first then the focus. 8
ملخص المحتوى في الصفحة رقم 9
TV-IP522P ProView Megapixel Internet Camera Rear Panel Components The power connection to the camera when fitted with the Infrared lens is split between the camera body and lens using the power connection adapter cable attached to the infrared lens. All other cables connect to the camera at the rear panel. Power indicator GPIO Port GPIO Port Power receptacle Auto Iris Adjustment Audio-Out Port Audio-In Port for mic Ethernet Port
ملخص المحتوى في الصفحة رقم 10
TV-IP522P ProView Megapixel Internet Camera Mic-In The camera is equipped with an internal microphone, however this can be augmented by an external mic. Use this audio jack socket for an external microphone. Line Out Use this audio jack socket to connect to external speakers for two-way audio communication. DC 12V Insert the power adapter shipped with the camera directly if using the regular lens; or insert the power adapter cable on the infrared lens connected to the power adapter
ملخص المحتوى في الصفحة رقم 11
TV-IP522P ProView Megapixel Internet Camera 2 Installing the Camera The camera should be attached to the stand included in the package. The camera stand can be mounted on a flat surface using the three screw holes on the base of the stand. The camera is intended for indoor use. The camera, the power adapter and power source should be protected from water and moisture, excessive heat, direct sunlight and cold. Make sure the power adapter and cord and Ethernet cable are safely arra
ملخص المحتوى في الصفحة رقم 12
TV-IP522P ProView Megapixel Internet Camera Connect Ethernet Cable To connect the camera to your network, connect a Category 5 or better Ethernet cable to the network cable connector located on the camera’s left side panel, and then attach it to the network. The Ethernet port will automatically detect and adjust to the speed (10 or 100 Mbps) and polarity (MDI-II or MDI-X) of the connection. Connect Power using AC Adapter and Power On Camera To provide power to
ملخص المحتوى في الصفحة رقم 13
TV-IP522P ProView Megapixel Internet Camera Reset Camera A manual reset can be conducted by following the procedure below. The reset button is located on the rear panel of the camera. To reset the system settings to factory defaults, please follow these steps: 1. Leave the camera powered on, do not disconnect the power. 2. Use a paper clip or similar object to press the reset button and hold. The reset button is located on the rear panel of the device. See the Rear Panel Com
ملخص المحتوى في الصفحة رقم 14
TV-IP522P ProView Megapixel Internet Camera SD Card Slot SD Card Slot The built in SD card slot allows you to insert Secure Digital Cards. This enables images taken by the camera to be saved to an external SD card. 14
ملخص المحتوى في الصفحة رقم 15
TV-IP522P ProView Megapixel Internet Camera 3 SetupWizard This section describes the how to setup a camera using the SetupWizard. To install the SetupWizard on a system running Windows, launch the SetupWizard on the installation CD-ROM and follow the setup instructions. Once the software is installed, the SetupWizard utility is ready for use. Launching the SetupWizard To launch the SetupWizard, click Start > Programs > TRENDnet > SetupWizard > SetupWizard.
ملخص المحتوى في الصفحة رقم 16
TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select Your Camera The following screen appears showing the cameras that have been found on your network: • Click on the camera you want to configure. • Click Next to continue. 16
ملخص المحتوى في الصفحة رقم 17
TV-IP522P ProView Megapixel Internet Camera SetupWizard- Authentication On the following screen type in the ID and Password that you will use to configuring the camera settings: • Type a User ID in the ID field. • Type the password of the User in the Password field. • Click Next to continue. 17
ملخص المحتوى في الصفحة رقم 18
TV-IP522P ProView Megapixel Internet Camera SetupWizard- Change Password The following screen allows you to change the default admin password: Carry out the following if you want to change the admin password: • Tick the Change Password checkbox • Type in a New Password in the New Password field and confirm it in the Confirm Password field • Click the Next button to proceed to the next Setup window If you don’t want to change the admin password, leave the checkbo
ملخص المحتوى في الصفحة رقم 19
TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select a Connection Option The following window allows you to specify the connection method used by your camera network. Click the radio button of the network environment your camera is connected to. The available options are: • PPPoE • DHCP • Fixed IP 19
ملخص المحتوى في الصفحة رقم 20
TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select a Connection Option- PPPoE If your connection method is PPPoE, click the PPPoE radio button and click Next: The following window appears: • Type the User Name used to connect to your PPPoE connection in the User Name field. • Type the Password of the PPPoE User Name in the Password field and confirm it in the Confirm Password field. • Click Next to pro
