Fusionbrands , Inc.MS-AB108 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

v 1.0
MARINE ACTIVE SUBWOOFER
MS-AB108
SPECIFICATIONS INSTALLATION
» Make sure the Marine Active Enclosure is firmly secured.
MAX POWER RATING 210 Watts
» Check before drilling or cutting holes.
FREQUENCY RESPONSE 30Hz – 250Hz
» DO NOT work near gas tanks, fuel lines, hydraulic lines or electrical
LOW PASS FILTER (VARIABLE) 30Hz – 250Hz
wiring.
TUNING Bass Reflex
» DO NOT mount the Marine Active Enclosure in such a way as to pinch
WOOFER SIZE 8” down firing
or damage the wires.
» Make s

ملخص المحتوى في الصفحة رقم 2

v 1.0 WIRING Be sure to use the supplied power extension cable. » Connect the ground wire (Black wire) to the negative of the vessel (Ground) Note: clean dirt, corrosion and paint to bare metal. » Connect the 12 volt (red wire) to the positive battery terminal of the vessel; Make sure the fuse is close to the battery. » Connect the remote on (blue wire) to the remote turn on lead of the Headunit. - If your head unit does not have a remote turn-on lead, connect a switched 12v power lead to th