ملخص المحتوى في الصفحة رقم 8
Proformance Integrator OM 10/6/05 2:48 PM Page 2 SPECIFICATIONS IS5 IS6 IS6C IS6DT IS8 IS8C Frequency Response Frequency Response Frequency Response Frequency Response Frequency Response Frequency Response 45Hz– 20kHz (–10dB) 38Hz – 20kHz (–10dB) 40Hz– 20kHz (–10dB) 40Hz – 20kHz (–10dB) 30Hz – 20kHz (–10dB) 32Hz – 20kHz (–10dB) Recommended Maximum Recommended Maximum Recommended Maximum Recommended Maximum Recommended Maximum Recommended Maximum Amplifier Power † Amplifier Power † Amplifier
ملخص المحتوى في الصفحة رقم 1
Proformance Integrator OM 10/6/05 2:48 PM Page 3
®
™
PERFORMANCE
INTEGRATOR
IS5, IS6, IS8, IS6C, IS8C,
IS6DT
OWNER’S GUIDE
ملخص المحتوى في الصفحة رقم 2
Proformance Integrator OM 10/6/05 2:48 PM Page 2 THANK YOU FOR CHOOSING JBL For more than 60 years, JBL We’re confident that the Please take a moment to has been involved in every JBL loudspeakers you have register your product on our aspect of music and film chosen will provide every Web site at www.jbl.com. It recording and reproduction, note of enjoyment that you enables us to keep you posted from live performances to expected – and that when on our latest advancements, monitoring the reco
ملخص المحتوى في الصفحة رقم 3
Proformance Integrator OM 10/6/05 2:48 PM Page 3 ® should not call attention to front speakers. In Dolby Digital ® themselves. They should and DTS systems, aim the provide a diffuse, ambient tweeters toward the listening sound accompanying the main position at ear-level height. program material heard in the FRONT SPEAKERS WALL 0 0 40 – 60 MODELS IS5, IS6, IS8 AS REAR SPEAKERS 5 – 6 ft. WALL WALL WALL WALL MODEL IS6DT IN-CEILING IS6DT speaker centrally in the For 7.1-channel systems where ceil
ملخص المحتوى في الصفحة رقم 4
Proformance Integrator OM 10/6/05 2:48 PM Page 4 SPEAKER CONNECTIONS CONNECTION TIPS The wires for both speakers the correct polarity remains should be the same length. If equally important in order to one speaker is placed closer to preserve the proper ambience the amplifier than the other, and directionality of the hide the excess wire behind program material. the wall. Speakers and elec- To use the push-type speaker tronics terminals have corre- terminals, press the red (+) or sponding (+)
ملخص المحتوى في الصفحة رقم 5
Proformance Integrator OM 10/6/05 2:48 PM Page 5 EXISTING CONSTRUCTION IS5, IS6, IS8 ≥1/2" ≥1/2" ≥1/2" Remove the grille from the Determine the correct speaker Note: Always allow at least speaker frame by pulling on location. one-half inch between a wall the paper tab. If the tab is Note: Remove the inner template, stud and the speaker cutout or missing, to avoid scratching which is the paint shield, at the the locking tabs will not be able the grille or baffle you may perforation. Use the o
ملخص المحتوى في الصفحة رقم 6
Proformance Integrator OM 10/6/05 2:48 PM Page 6 EXISTING CONSTRUCTION IS6C, IS6DT, IS8C ≥1/2" ≥1/2" ≥1/2" Remove the grille from the Determine the correct speaker Cut the drywall. speaker frame by pulling on location. Note: Always allow at least the paper tab. If the tab is Note: Remove the inner template, one-half inch between a wall missing, to avoid scratching which is the paint shield, at the stud and the speaker cutout or the grille or baffle you may perforation. Use the outer tem- the
ملخص المحتوى في الصفحة رقم 7
Proformance Integrator OM 10/6/05 2:48 PM Page 7 NEW CONSTRUCTION You will need to purchase the correct rough-in frame kit for your model: SPEAKER MODEL ROUGH-IN FRAME KIT IS5 RIF5 IS6 RIF6 IS6C, IS6DT RIF6C (pair pack)/RIF6CS (single pack) IS8 RIF8 IS8C RIF8C Detailed installation instructions are supplied with the rough-in kit. PAINTING THE SPEAKER FRAME AND GRILLE Performance Integrator loud- baffle. This will protect the Note: Gently remove the speakers can be painted to speaker componen
